Re: [PATCH] Fixed TPACKET V3 to signal poll when block is closed rather than every packet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dan Collins <dan@xxxxxxxxxxxxxx>
Date: Fri, 19 Dec 2014 16:49:25 +1300

> Make TPACKET_V3 signal poll when block is closed rather than for every
> packet. Side effect is that poll will be signaled when block retire
> timer expires which didn't previously happen. Issue was visible when
> sending packets at a very low frequency such that all blocks are retired
> before packets are received by TPACKET_V3. This caused avoidable packet
> loss. The fix ensures that the signal is sent when blocks are closed
> which covers the normal path where the block is filled as well as the
> path where the timer expires. The case where a block is filled without
> moving to the next block (ie. all blocks are full) will still cause poll
> to be signaled.
> 
> Signed-off-by: Dan Collins <dan@xxxxxxxxxxxxxx>

Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel Discussion]     [TCP Instrumentation]     [Ethernet Bridging]     [Linux Wireless Networking]     [Linux WPAN Networking]     [Linux Host AP]     [Linux WPAN Networking]     [Linux Bluetooth Networking]     [Linux ATH6KL Networking]     [Linux Networking Users]     [Linux Coverity]     [VLAN]     [Git]     [IETF Annouce]     [Linux Assembly]     [Security]     [Bugtraq]     [Yosemite Information]     [MIPS Linux]     [ARM Linux Kernel]     [ARM Linux]     [Linux Virtualization]     [Linux IDE]     [Linux RAID]     [Linux SCSI]