Hi All,
Attached to this mail is my configuration file for my Asus P8Z77-V PRO
motherboard. This sensors.conf file is to be used in combination with
the nct6775 standalone driver by Guenter Roeck.
Some of the settings may still require some further tweaking, but the
overall output of the sensors command on my system looks pretty
reasonable now...
Grtz,
Luc
# Configuration file for an ASUS P8Z77-V PRO motherboard
# (using the Nuvoton NCT6779D standalone driver by Guenter Roeck)
#
# Author: Luc Pauwels
#
chip "nct6779-*"
label in0 "Vcore Voltage"
label in1 " +12 Voltage"
label in2 " AVCC Voltage"
label in3 " +3.3 Voltage"
label in4 " +5 Voltage"
ignore in5
ignore in6
label in7 " 3VSB Voltage"
label in8 " VBAT Voltage"
label in9 " VTT Voltage"
ignore in10
ignore in11
ignore in12
ignore in13
ignore in14
label fan1 "CHASSIS1 FAN Speed"
label fan2 "CPU FAN Speed"
label fan3 "CHASSIS2 FAN Speed"
label fan4 "CHASSIS3 FAN Speed"
label fan5 "CHASSIS4 FAN Speed"
label temp1 "MB Temperature"
label temp2 "CPU Temperature"
ignore temp3
ignore temp4
ignore temp5
ignore temp6
ignore temp7
ignore temp8
ignore temp9
ignore temp10
ignore cpu0_vid
compute in1 @ * (96/8), @ / (96/8)
compute in4 @ * (40/8), @ / (40/8)
set in1_min 12 * 0.95
set in1_max 12 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
set in4_min 5 * 0.95
set in4_max 5 * 1.05
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
set in8_min 3.06
set in8_max 3.53
set in9_min 0.89
set in9_max 1.74
set temp1_max 70
set temp1_max_hyst 40
set temp2_max 80
set temp2_max_hyst 75
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
