On Fri, Feb 14, 2020 at 11:58 AM Nikolay Borisov <nborisov@xxxxxxxx> wrote: > > > > On 14.02.20 г. 13:30 ч., Marc Lehmann wrote: > > Hi! > > > > I've upgraded a machine to linux 5.4.15 that runs a small netnews > > system. It normally pulls news with about 20MB/s. After upgrading (it > > seems) that this process is now CPU bound, and I get only about 10mb/s > > throughput. Otherwise, everything seems fine - no obvious bugs, and no > > obvious performance problems. > > > > "CPU-bound" specifically means that the disk(s) seem pretty idle (it an > > 6x10TB raid5), I can do a lot of I/O without slowing down the transfer, > > but there is always a single kworker which is constantly at 100% cpu (i.e. > > one core) in top: > > So this is a 50tb useful space, right? > > > > > 8963 root 20 0 0 0 0 R 2 100.0 0.0 2:04 [kworker/u8:15+flush-btrfs-3] > > > > When I cat /proc/8963/task/8963/stack regularly, I get either no output or > > (most often) this single line: > > > > [<0>] tree_search_offset.isra.0+0x16a/0x1d0 [btrfs] > > This points to freespace cache. One thing that I might suggest is try > using free-space-tree (aka free space cache v2 ) as opposed to v1. You > can achieve this with the space_cache=2 mount option. I suspect what > might be happening is the freespace cache is rather fragmented and the > rb tree which is really pointer chasing is having a hard time keeping > up. space cache v2 is a lot better in that regard, since it's a btree as > its backing data structure. Both free space cache and free space tree use the same in memory representation of free space, which is a red black tree containing extent and bitmap entries. What differs between them is how they persist that information - the space cache uses inodes and data extents, while the free space tree uses a btree for that (no use of data extents nor inodes). tree_search_offset is used to search the in-memory red black tree, used by the free space cache and the free space tree implementations. So you can't deduce that the free space cache is being used, and despite being the default, it was not mentioned by Marc if he's not using already the free space tree (-o space_cache=v2). Switching from one to the other might make the problem go away, simply because it cause free space to be scanned and build a new cache or tree. -- Filipe David Manana, “Whether you think you can, or you think you can't — you're right.”
