Should I --force it while mounted, or run the checks from RO mount status? On Sun, Dec 29, 2019 at 2:07 PM Chris Murphy <lists@xxxxxxxxxxxxxxxxx> wrote: > > On Sun, Dec 29, 2019 at 1:44 PM Patrick Erley <pat-lkml@xxxxxxxxx> wrote: > > > > On a system where I've been tinkering with linux-next for years, my / > > has got some errors. When migrating from 5.1 to 5.2, I saw these > > errors, but just ignored them and went back to 5.1, and continued my > > tinkering. Over the holidays, I decided to try to upgrade the kernel, > > saw the errors again, and decided to look into them, finding the > > tree-checker page on the kernel docs, and am writing this e-mail. > > > > My / does not contain anything sensitive or important, as /home and > > /usr/src are both subvolumes on a separate larger drive. > > > > btrfs fi show: > > Label: none uuid: 815266d6-a8b9-4f63-a593-02fde178263f > > Total devices 2 FS bytes used 93.81GiB > > devid 1 size 115.12GiB used 115.11GiB path /dev/nvme0n1p2 > > devid 3 size 115.12GiB used 115.11GiB path /dev/sda3 > > > > Label: none uuid: 4bd97711-b63c-40cb-bfa5-aa9c2868cf98 > > Total devices 1 FS bytes used 536.48GiB > > devid 1 size 834.63GiB used 833.59GiB path /dev/sda5 > > > > Booting a more recent kernel, I get spammed with: > > [ 8.243899] BTRFS critical (device nvme0n1p2): corrupt leaf: root=5 > > block=303629811712 slot=30 ino=5380870, invalid inode generation: has > > 13221446351398931016 expect [0, 2997884] > > [ 8.243902] BTRFS error (device nvme0n1p2): block=303629811712 read > > time tree block corruption detected > > > > There are 6 corrupted inodes: > > cat dmesg.foo | grep "BTRFS critical" | sed -re > > 's:.*block=([0-9]*).*ino=([0-9]+).*:\1 \2:' | sort | uniq > > 303629811712 5380870 > > 303712501760 3277548 > > 303861395456 5909140 > > 304079065088 2228479 > > 304573444096 3539224 > > 305039556608 1442149 > > > > and they all have the same value for the inode generation. Before I > > reboot into a livecd and btrfs check --repair, is there anything > > interesting that a snapshot of the state would show? I have 800gb > > unpartitioned on the nvme, so backing up before is already in the > > plans, and I could just as easily grab an image of the partitions > > while I'm at it. > > I'm not certain whether btrfs check can fix these kinds of errors yet. > Can you use btrfs-progs v5.4 and just do a 'btrfs check' and also > again with 'btrfs check --mode=lowmem' ? I'm curious if either mode > sees the same problem the kernel tree checker sees. > > -- > Chris Murphy
