Re: [PATCH 2/3] btrfs: Introduce btrfs_io_geometry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 03, 2019 at 12:05:04PM +0300, Nikolay Borisov wrote:
> Signed-off-by: Nikolay Borisov <nborisov@xxxxxxxx>
> ---
>  fs/btrfs/volumes.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++
>  fs/btrfs/volumes.h |  2 +
>  2 files changed, 100 insertions(+)
> 
> diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
> index 776f5c7ca7c5..b130f465ca6d 100644
> --- a/fs/btrfs/volumes.c
> +++ b/fs/btrfs/volumes.c
> @@ -5907,6 +5907,104 @@ static bool need_full_stripe(enum btrfs_map_op op)
>  	return (op == BTRFS_MAP_WRITE || op == BTRFS_MAP_GET_READ_MIRRORS);
>  }
>  
> +/*
> + * btrfs_io_geometry - calculates the geomery of a particular (address, len)
> + *		       tuple. This information is used to calculate how big a
> + *		       particular bio can get before it straddles a stripe.
> + *
> + * @fs_info - The omnipresent btrfs structure
> + * @logical - Address that we want to figure out the geometry of
> + * @len	    - The length of IO we are going to perform, starting at @logical
> + * @op      - Type of operation - Write or Read
> + * @io_geom - Pointer used to return values
> + *
> + * Returns < 0 in case a chunk for the given logical address cannot be found,
> + * usually shouldn't happen unless @logical is corrupted, 0 otherwise.
> + */
> +int btrfs_io_geometry(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
> +		      u64 logical, u64 len, struct btrfs_io_geometry *io_geom)
> +{

I think the function name lacks the descriptivity what it does, besides
that it also collides with the structure name.

> +	struct extent_map *em;
> +	struct map_lookup *map;
> +	u64 offset;
> +	u64 stripe_offset;
> +	u64 stripe_nr;
> +	u64 stripe_len;
> +	u64 raid56_full_stripe_start = (u64)-1;
> +	int data_stripes;
> +
> +	ASSERT(op != BTRFS_MAP_DISCARD);
> +
> +	em = btrfs_get_chunk_map(fs_info, logical, len);
> +	if (IS_ERR(em))
> +		return PTR_ERR(em);
> +
> +	map = em->map_lookup;
> +	/* Offset of this logical address in the chunk */
> +	offset = logical - em->start;
> +	/* Len of a stripe in a chunk */
> +	stripe_len = map->stripe_len;
> +	/* Stripe wher this block falls in */
> +	stripe_nr = div64_u64(offset, stripe_len);
> +	/* Offset of stripe in the chunk */
> +	stripe_offset = stripe_nr * stripe_len;
> +	if (offset < stripe_offset) {
> +		btrfs_crit(fs_info,
> +			   "stripe math has gone wrong, stripe_offset=%llu, offset=%llu, start=%llu, logical=%llu, stripe_len=%llu",

un-indent long strings

> +			   stripe_offset, offset, em->start, logical,
> +			   stripe_len);
> +		free_extent_map(em);
> +		return -EINVAL;
> +	}
> +
> +	/* stripe_offset is the offset of this block in its stripe*/
> +	stripe_offset = offset - stripe_offset;
> +	data_stripes = nr_data_stripes(map);
> +
> +

double newline

> +	if (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
> +		u64 max_len = stripe_len - stripe_offset;
> +
> +		/*
> +		 * In case of raid56, we need to know the stripe aligned start
> +		 */
> +		if (map->type & BTRFS_BLOCK_GROUP_RAID56_MASK) {
> +			unsigned long full_stripe_len = stripe_len * data_stripes;
> +			raid56_full_stripe_start = offset;
> +
> +			/*
> +			 * Allow a write of a full stripe, but make sure we
> +			 * don't allow straddling of stripes
> +			 */
> +			raid56_full_stripe_start = div64_u64(raid56_full_stripe_start,
> +					full_stripe_len);
> +			raid56_full_stripe_start *= full_stripe_len;
> +
> +			/*
> +			 * For writes to RAID[56], allow a full stripeset across
> +			 * all disks. For other RAID types and for RAID[56]
> +			 * reads, just allow a single stripe (on a single disk).
> +			 */
> +			if (op == BTRFS_MAP_WRITE) {
> +				max_len = stripe_len * data_stripes -
> +				(offset - raid56_full_stripe_start);

indentation

> +			}
> +		}
> +		len = min_t(u64, em->len - offset, max_len);
> +	} else {
> +		len = em->len - offset;
> +	}
> +
> +	io_geom->len = len;
> +	io_geom->offset = offset;
> +	io_geom->stripe_len = stripe_len;
> +	io_geom->stripe_nr = stripe_nr;
> +	io_geom->stripe_offset = stripe_offset;
> +	io_geom->raid56_stripe_offset = raid56_full_stripe_start;
> +
> +	return 0;
> +}
> +
>  static int __btrfs_map_block(struct btrfs_fs_info *fs_info,
>  			     enum btrfs_map_op op,
>  			     u64 logical, u64 *length,
> diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
> index 7c1ddf35b7d4..f3bdf768bbab 100644
> --- a/fs/btrfs/volumes.h
> +++ b/fs/btrfs/volumes.h
> @@ -421,6 +421,8 @@ int btrfs_map_block(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
>  int btrfs_map_sblock(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
>  		     u64 logical, u64 *length,
>  		     struct btrfs_bio **bbio_ret);
> +int btrfs_io_geometry(struct btrfs_fs_info *fs_info, enum btrfs_map_op op,
> +		      u64 logical, u64 len, struct btrfs_io_geometry *io_geom);
>  int btrfs_rmap_block(struct btrfs_fs_info *fs_info, u64 chunk_start,
>  		     u64 physical, u64 **logical, int *naddrs, int *stripe_len);
>  int btrfs_read_sys_array(struct btrfs_fs_info *fs_info);
> -- 
> 2.17.1



[Index of Archives]     [Linux Filesystem Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux