On Mon, Jan 28, 2019 at 2:05 AM Qu Wenruo <wqu@xxxxxxxx> wrote:
>
> Commit a514d63882c3 ("btrfs: qgroup: Commit transaction in advance to reduce
> early EDQUOT") is no longer forcing transaction commit to reclaim space,
> and only commits transaction asynchronously in advance to address it.
>
> However the criteria used in async transaction commit is not
> comprehensive, thus it doesn't reclaim space automatically.
>
> This test case will check the behavior by:
> 1) Falloc a large padding file
> This file will take 90% of the qgroup limit
>
> 2) Sync the fs
> To reflect the qgroup changes
>
> 3) Delete the file
> Qgroup won't reclaim the space until transaction committed.
>
> 4) Try to write a file
> If kernel not fixed, qgroup will not automatically commit transaction
> to reclaim the freed space and hit EDQUOT.
>
> This bug is going to be fxied by a patch for kernel titled
fxied -> fixed
titled -> titled:
> "btrfs: qgroup: Make qgroup async transaction commit more aggressive".
>
> Signed-off-by: Qu Wenruo <wqu@xxxxxxxx>
> ---
> tests/btrfs/180 | 62 +++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/180.out | 3 +++
> tests/btrfs/group | 1 +
> 3 files changed, 66 insertions(+)
> create mode 100755 tests/btrfs/180
> create mode 100644 tests/btrfs/180.out
>
> diff --git a/tests/btrfs/180 b/tests/btrfs/180
> new file mode 100755
> index 00000000..df876310
> --- /dev/null
> +++ b/tests/btrfs/180
> @@ -0,0 +1,62 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> +#
> +# FS QA Test 180
> +#
> +# Test if btrfs hits EDQUOT without reclaim already freed extents when quota
reclaim -> reclaiming
> +# is enabled.
> +#
> +# This bug is going to be fxied by a patch for kernel titled
> +# "btrfs: qgroup: Make qgroup async transaction commit more aggressive"
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_xfs_io_command falloc
> +
> +_scratch_mkfs > /dev/null
> +_scratch_mount
> +
> +$BTRFS_UTIL_PROG quota enable "$SCRATCH_MNT" > /dev/null
> +$BTRFS_UTIL_PROG quota rescan -w "$SCRATCH_MNT" > /dev/null
> +$BTRFS_UTIL_PROG qgroup limit -e 1G "$SCRATCH_MNT"
> +
> +$XFS_IO_PROG -f -c "falloc 0 900M" "$SCRATCH_MNT/padding" | _filter_xfs_io
No need to use the _filter_xfs_io for falloc (it doesn't output
throughput values such as the write, reflink and dedupe commands).
> +
> +# Commit transaction to reflect the quota usage
> +sync
> +
> +rm "$SCRATCH_MNT/padding"
I would pass -f to rm. It's not uncommon to have setups with "alias rm='rm -i'".
Other than that, it looks good.
Reviewed-by: Filipe Manana <fdmanana@xxxxxxxx>
Thanks.
> +
> +# Without the kernel fix, this will trigger EDQUOT.
> +_pwrite_byte 0xcd 0 512M "$SCRATCH_MNT/real_file" | _filter_xfs_io
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/180.out b/tests/btrfs/180.out
> new file mode 100644
> index 00000000..17187477
> --- /dev/null
> +++ b/tests/btrfs/180.out
> @@ -0,0 +1,3 @@
> +QA output created by 180
> +wrote 536870912/536870912 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 46dd3c95..03eb62f9 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -182,3 +182,4 @@
> 177 auto quick swap balance
> 178 auto quick send
> 179 auto qgroup dangerous
> +180 auto quick qgroup limit
> --
> 2.18.0
>
--
Filipe David Manana,
“Whether you think you can, or you think you can't — you're right.”
