On 20.11.2017 22:24, Edmund Nadolski wrote:
> Improve code documentation by adding/expanding comments in
> several places.
>
> Signed-off-by: Edmund Nadolski <enadolski@xxxxxxxx>
> ---
> fs/btrfs/ctree.c | 31 +++++++++++++++-------
> fs/btrfs/ctree.h | 28 +++++++++++++++-----
> fs/btrfs/extent_map.h | 58 ++++++++++++++++++++++++++++-------------
> fs/btrfs/file-item.c | 3 +++
> fs/btrfs/inode.c | 21 +++++++++++----
> include/uapi/linux/btrfs_tree.h | 1 +
> 6 files changed, 104 insertions(+), 38 deletions(-)
>
> diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
> index 531e0a8..9331d02 100644
> --- a/fs/btrfs/ctree.c
> +++ b/fs/btrfs/ctree.c
> @@ -2654,17 +2654,30 @@ int btrfs_find_item(struct btrfs_root *fs_root, struct btrfs_path *path,
> }
>
> /*
> - * look for key in the tree. path is filled in with nodes along the way
> - * if key is found, we return zero and you can find the item in the leaf
> - * level of the path (level 0)
> + * Search a btree for a specific key. Optionally update the btree for
> + * item insertion or removal.
> *
> - * If the key isn't found, the path points to the slot where it should
> - * be inserted, and 1 is returned. If there are other errors during the
> - * search a negative error number is returned.
> + * @trans - Transaction handle (NULL for none, requires @cow == 0).
> + * @root - The btree to be searched.
> + * @key - key for search.
> + * @p - Points to a btrfs_path to be populated with btree node and index
> + * values encountered during traversal. (See also struct btrfs_path.)
> + * @ins_len - byte length of item as follows:
> + * >0: byte length of item for insertion. Btree nodes/leaves are
> + * split as required.
> + * <0: byte length of item for deletion. Btree nodes/leaves are
> + * merged as required.
> + * 0: Do not modify the btree (search only).
> + * @cow - 0 to nocow, or !0 to cow for btree update.
> *
> - * if ins_len > 0, nodes and leaves will be split as we walk down the
> - * tree. if ins_len < 0, nodes will be merged as we walk down the tree (if
> - * possible)
> + * Return values:
> + * 0: @key was found and @p was updated to indicate the leaf and item
> + * slot where the item may be accessed.
> + * 1: @key was not found and @p was updated to indicate the leaf and
> + * item slot where the item may be inserted.
> + * <0: an error occurred.
> + *
> + * Note, insertion/removal updates will re-balance the btree as needed.
> */
> int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root *root,
> const struct btrfs_key *key, struct btrfs_path *p,
> diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
> index 2154b5a..e980caa 100644
> --- a/fs/btrfs/ctree.h
> +++ b/fs/btrfs/ctree.h
> @@ -318,20 +318,36 @@ struct btrfs_node {
> } __attribute__ ((__packed__));
>
> /*
> - * btrfs_paths remember the path taken from the root down to the leaf.
> - * level 0 is always the leaf, and nodes[1...BTRFS_MAX_LEVEL] will point
> - * to any other levels that are present.
> - *
> - * The slots array records the index of the item or block pointer
> - * used while walking the tree.
> + * Used with btrfs_search_slot() to record a btree search path traversed from a
> + * root down to a leaf.
> */
> enum { READA_NONE = 0, READA_BACK, READA_FORWARD };
> struct btrfs_path {
> + /*
> + * The nodes[] and slots[] arrays are indexed according to btree
> + * levels. Index 0 corresponds to the lowest (leaf) level. Increasing
> + * indexes correspond to interior btree nodes at subsequently higher
> + * levels.
> + *
> + * nodes[0] always points to a leaf. nodes[1] points to a btree node
> + * which contains a block pointer referencing that leaf. For higher
> + * indexes, node[n] points to a btree node which contains a block
> + * pointer referencing node[n-1].
> + */
> struct extent_buffer *nodes[BTRFS_MAX_LEVEL];
> +
> + /*
> + * The slots[0] value identifies an item index in the leaf at nodes[0].
> + * Each slots[n] value identifies a block pointer index in the
> + * corresponding tree node at nodes[n].
> + */
> int slots[BTRFS_MAX_LEVEL];
> +
> /* if there is real range locking, this locks field will change */
> u8 locks[BTRFS_MAX_LEVEL];
> +
> u8 reada;
> +
> /* keep some upper locks as we walk down */
> u8 lowest_level;
>
> diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h
> index 64365bb..34ea85c3 100644
> --- a/fs/btrfs/extent_map.h
> +++ b/fs/btrfs/extent_map.h
> @@ -5,35 +5,57 @@
> #include <linux/rbtree.h>
> #include <linux/refcount.h>
>
> -#define EXTENT_MAP_LAST_BYTE ((u64)-4)
> -#define EXTENT_MAP_HOLE ((u64)-3)
> -#define EXTENT_MAP_INLINE ((u64)-2)
> -#define EXTENT_MAP_DELALLOC ((u64)-1)
> -
> -/* bits for the flags field */
> -#define EXTENT_FLAG_PINNED 0 /* this entry not yet on disk, don't free it */
> -#define EXTENT_FLAG_COMPRESSED 1
> -#define EXTENT_FLAG_VACANCY 2 /* no file extent item found */
> -#define EXTENT_FLAG_PREALLOC 3 /* pre-allocated extent */
> -#define EXTENT_FLAG_LOGGING 4 /* Logging this extent */
> -#define EXTENT_FLAG_FILLING 5 /* Filling in a preallocated extent */
> -#define EXTENT_FLAG_FS_MAPPING 6 /* filesystem extent mapping type */
> +/*
> + * Reserve some special-case values for the extent_map .start, .block_start,
> + *: and .orig_start fields.
^ extra :
> + */
> +#define EXTENT_MAP_LAST_BYTE ((u64)-4) /* Lowest reserved value */
> +#define EXTENT_MAP_HOLE ((u64)-3) /* Unwritten extent */
> +#define EXTENT_MAP_INLINE ((u64)-2) /* Inlined file data */
> +#define EXTENT_MAP_DELALLOC ((u64)-1) /* Delayed block allocation */
These values are only set/checked on the .block_start parameter so you
can possibly remove the .start/.orig_start from the above comment.
>
> +/*
> + * Bit flags for the extent_map .flags field.
> + */
> +#define EXTENT_FLAG_PINNED 0 /* entry not yet on disk, don't free it */
> +#define EXTENT_FLAG_COMPRESSED 1
> +#define EXTENT_FLAG_VACANCY 2 /* no file extent item found */
> +#define EXTENT_FLAG_PREALLOC 3 /* pre-allocated extent */
> +#define EXTENT_FLAG_LOGGING 4 /* Logging this extent */
> +#define EXTENT_FLAG_FILLING 5 /* Filling in a preallocated extent */
> +#define EXTENT_FLAG_FS_MAPPING 6 /* filesystem extent mapping type */
> +
> +/*
> + * In-memory representation of a file extent (regular/prealloc/inline).
> + */
<rant>
I just realise how badly named this struct is. Because we really have
on-disk extents and in-memory extents (similar to XFS nomenclature) and
the extent_map name doesn't really bring those 2 things together
</rant>
> struct extent_map {
> struct rb_node rb_node;
>
> /* all of these are in bytes */
> - u64 start;
> - u64 len;
> + u64 start; /* logical byte offset in the file */
> + u64 len; /* byte length of extent in the file */
> u64 mod_start;
> u64 mod_len;
> u64 orig_start;
> u64 orig_block_len;
> +
> + /* max. bytes needed to hold the (uncompressed) extent in memory. */
> u64 ram_bytes;
> +
> + /*
> + * For regular/prealloc, block_start is a logical address denoting the
> + * start of the extent data, and block_len is the on-disk byte length
> + * of the extent (which may be comressed). block_start may be
> + * EXTENT_MAP_HOLE if the extent is unwritten. For inline, block_start
> + * is EXTENT_MAP_INLINE and block_len is (u64)-1. See also
> + * btrfs_extent_item_to_extent_map() and btrfs_get_extent().
> + */
> u64 block_start;
> u64 block_len;
> - u64 generation;
> - unsigned long flags;
> +
> + u64 generation; /* transaction id */
> + unsigned long flags; /* EXTENT_FLAG_* bit flags as above */
> +
> union {
> struct block_device *bdev;
>
> @@ -44,7 +66,7 @@ struct extent_map {
> struct map_lookup *map_lookup;
> };
> refcount_t refs;
> - unsigned int compress_type;
> + unsigned int compress_type; /* BTRFS_COMPRESS_* */
> struct list_head list;
> };
>
> diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
> index fdcb410..5d63172 100644
> --- a/fs/btrfs/file-item.c
> +++ b/fs/btrfs/file-item.c
> @@ -929,6 +929,9 @@ int btrfs_csum_file_blocks(struct btrfs_trans_handle *trans,
> goto out;
> }
>
> +/*
> + * Populate an extent_map from the btrfs_file_extent_item contents.
> + */
> void btrfs_extent_item_to_extent_map(struct btrfs_inode *inode,
> const struct btrfs_path *path,
> struct btrfs_file_extent_item *fi,
> diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
> index 72c7b38..b6d5d94 100644
> --- a/fs/btrfs/inode.c
> +++ b/fs/btrfs/inode.c
> @@ -6916,17 +6916,28 @@ static noinline int uncompress_inline(struct btrfs_path *path,
> }
>
> /*
> - * a bit scary, this does extent mapping from logical file offset to the disk.
> - * the ugly parts come from merging extents from the disk with the in-ram
> + * btrfs_get_extent - find or create an extent_map for the (@start, @len) range.
> + *
> + * @inode - inode containing the desired extent.
> + * @page - page for inlined extent (NULL if none)
> + * @page_offset - byte offset within @page
> + * @start - logical byte offset in the file.
> + * @len - byte length of the range.
> + * @create - for inlined extents: 0 to update @page with extent data from
> + * the item; 1 to bypass the update.
> + *
> + * A bit scary, this does extent mapping from logical file offset to the disk.
> + * The ugly parts come from merging extents from the disk with the in-ram
> * representation. This gets more complex because of the data=ordered code,
> * where the in-ram extents might be locked pending data=ordered completion.
> *
> * This also copies inline extents directly into the page.
> + *
> + * Returns the extent_map, or error code.
> */> struct extent_map *btrfs_get_extent(struct btrfs_inode *inode,
> - struct page *page,
> - size_t pg_offset, u64 start, u64 len,
> - int create)
> + struct page *page, size_t pg_offset,
> + u64 start, u64 len, int create)
> {
> struct btrfs_fs_info *fs_info = btrfs_sb(inode->vfs_inode.i_sb);
> int ret;
> diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h
> index 6d6e5da..693636a 100644
> --- a/include/uapi/linux/btrfs_tree.h
> +++ b/include/uapi/linux/btrfs_tree.h
> @@ -730,6 +730,7 @@ struct btrfs_balance_item {
> __le64 unused[4];
> } __attribute__ ((__packed__));
>
> +/* Values for .type field in btrfs_file_extent_item */
> #define BTRFS_FILE_EXTENT_INLINE 0
> #define BTRFS_FILE_EXTENT_REG 1
> #define BTRFS_FILE_EXTENT_PREALLOC 2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
