Re: Can't remount a BTRFS partition read write after a drive failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2017-05-16 15:56 GMT+03:00 Sylvain Leroux <sylvain@xxxxxxxxxxx>:
>
>
> The drive is not reliable. And I noticed when there is an error and the
> USB device appears to be dead to the kernel, I am later unable to
> remount rw the drive. I can mount it read only though.
>
> This seems to be a systematic behavior. And it occasionally happens when
> the computer wake up from sleep and the drive is still attached.
>
> Power cycling the disk do not change anything, but restarting the
> computer "solves" the issue.

(Maybe offtop) Seems like your disk's USB-SATA controller is almost
dead. You shouldn't further use it with USB because this lead to data
corruption. Detach HDD from case and plug directly to a SATA port or
replace the controller.

--
Ivan Sizov
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystem Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux