This case tests whether dio read can repair the bad copy if we have
a good copy.
Signed-off-by: Liu Bo <bo.li.liu@xxxxxxxxxx>
---
tests/btrfs/140 | 152 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/140.out | 39 ++++++++++++++
tests/btrfs/group | 1 +
3 files changed, 192 insertions(+)
create mode 100755 tests/btrfs/140
create mode 100644 tests/btrfs/140.out
diff --git a/tests/btrfs/140 b/tests/btrfs/140
new file mode 100755
index 0000000..db56123
--- /dev/null
+++ b/tests/btrfs/140
@@ -0,0 +1,152 @@
+#! /bin/bash
+# FS QA Test 140
+#
+# Regression test for btrfs DIO read's repair during read.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Liu Bo. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+_require_command "$BTRFS_MAP_LOGICAL_PROG" btrfs-map-logical
+_require_command "$FILEFRAG_PROG" filefrag
+_require_odirect
+
+# helpe to convert 'file offset' to btrfs logical offset
+FILEFRAG_FILTER='
+ if (/blocks? of (\d+) bytes/) {
+ $blocksize = $1;
+ next
+ }
+ ($ext, $logical, $physical, $length) =
+ (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
+ or next;
+ ($flags) = /.*:\s*(\S*)$/;
+ print $physical * $blocksize, "#",
+ $length * $blocksize, "#",
+ $logical * $blocksize, "#",
+ $flags, " "'
+
+# this makes filefrag output script readable by using a perl helper.
+# output is one extent per line, with three numbers separated by '#'
+# the numbers are: physical, length, logical (all in bytes)
+# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
+_filter_extents()
+{
+ tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
+}
+
+_check_file_extents()
+{
+ cmd="filefrag -v $1"
+ echo "# $cmd" >> $seqres.full
+ out=`$cmd | _filter_extents`
+ if [ -z "$out" ]; then
+ return 1
+ fi
+ echo "after filter: $out" >> $seqres.full
+ echo $out
+ return 0
+}
+
+_check_repair()
+{
+ filter=${1:-cat}
+ dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
+ if [ $? -eq 0 ]; then
+ echo 1
+ else
+ echo 0
+ fi
+}
+
+_scratch_dev_pool_get 2
+# step 1, create a raid1 btrfs which contains one 128k file.
+echo "step 1......mkfs.btrfs" >>$seqres.full
+
+mkfs_opts="-d raid1"
+_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
+
+_scratch_mount -o nospace_cache
+
+$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
+
+sync
+
+# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
+# one in $SCRATCH_DEV_POOL
+echo "step 2......corrupt file extent" >>$seqres.full
+
+extents=`_check_file_extents $SCRATCH_MNT/foobar`
+logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
+physical_on_scratch=`$BTRFS_MAP_LOGICAL_PROG -l ${logical_in_btrfs} $SCRATCH_DEV | grep "$SCRATCH_DEV" | awk '{print $6}'`
+
+_scratch_unmount
+$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_mount -o nospace_cache
+
+# step 3, 128k dio read (this read can repair bad copy)
+echo "step 3......repair the bad copy" >>$seqres.full
+
+# since raid1 consists of two copies, and the following read may read the good
+# copy directly, so lets loop 10 times here and discard output that dio reads
+# give
+for i in `seq 1 10`; do
+ $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
+ repair=`_check_repair`
+ if [ $repair -eq 1 ]; then
+ break
+ fi
+done
+
+_scratch_unmount
+
+# check if the repair works
+$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
+
+_scratch_dev_pool_put
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
new file mode 100644
index 0000000..d8e3856
--- /dev/null
+++ b/tests/btrfs/140.out
@@ -0,0 +1,39 @@
+QA output created by 140
+wrote 131072/131072 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 65536/65536 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+0e8c0000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0020: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0030: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0040: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0050: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0060: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0070: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0080: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0090: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c00f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0100: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0110: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0120: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0130: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0140: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0150: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0160: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0170: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0180: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c0190: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+0e8c01f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
+read 512/512 bytes at offset 244056064
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 9d4b80b..1cb9c98 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -141,3 +141,4 @@
137 auto quick send
138 auto compress
139 auto qgroup
+140 auto quick
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
