Added 2 drives to my RAID10, then ran btrfs balance. The system appears
to have crashed after several hours (I was ssh'd into that server at the
time on my local network). When I rebooted the Arch system, I ran btrfs
check and no errors were reported.
However, attempting to mount the vol hangs the system. Trying to mount
the system in recovery mode also hangs the system.
───── uname -a ~
Linux luna 4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 x86_64 GNU/Linux
───── btrfs --version ~
btrfs-progs v4.9
───── btrfs fi show ~
Label: 'Archlinux' uuid: e5ee12ac-7fb3-4e73-b9b2-a5cfb35145ae
Total devices 1 FS bytes used 66.41GiB
devid 1 size 111.24GiB used 111.24GiB path /dev/sda2
Label: 'Share' uuid: 9102bb33-49ad-4baf-a88d-1c7622bff938
Total devices 6 FS bytes used 4.20TiB
devid 1 size 2.73TiB used 1.90TiB path /dev/sdc
devid 2 size 2.73TiB used 1.90TiB path /dev/sdd
devid 3 size 2.73TiB used 1.90TiB path /dev/sde
devid 4 size 2.73TiB used 1.90TiB path /dev/sdb
devid 5 size 2.73TiB used 440.34GiB path /dev/sdf
devid 6 size 2.73TiB used 440.34GiB path /dev/sdg
The dmesg log when attempting to mount the vol can be found at url
http://cwillu.com:8080/108.63.177.210/1
Any ideas what can be done to be able to mount the volume and complete
the balancing?
Regards,
Steven
--
"Truth or die."
Steven Hum
417 Mayfair Av
Ottawa, ON K1Y 0K4
email sdothum@xxxxxxxxx
tel 613.237.9058
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
