On Tue, Jul 12, 2016 at 4:58 AM, Eryu Guan <eguan@xxxxxxxxxx> wrote:
> On Sat, Jul 02, 2016 at 01:32:08PM +0100, fdmanana@xxxxxxxxxx wrote:
>> From: Filipe Manana <fdmanana@xxxxxxxx>
>>
>> Test that an incremental send operation works after doing radical changes
>> in the directory hierarchy that involve switching the inode that directory
>> entries point to.
>>
>> This test exercises scenarios used to fail in btrfs and are fixed by the
>> following patches for the linux kernel:
>>
>> "Btrfs: send, fix failure to move directories with the same name around"
>> "Btrfs: incremental send, fix invalid paths for rename operations"
>>
>> Signed-off-by: Filipe Manana <fdmanana@xxxxxxxx>
>> ---
>> tests/btrfs/124 | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>> tests/btrfs/124.out | 2 +
>> tests/btrfs/group | 1 +
>> 3 files changed, 264 insertions(+)
>> create mode 100755 tests/btrfs/124
>> create mode 100644 tests/btrfs/124.out
>>
>> diff --git a/tests/btrfs/124 b/tests/btrfs/124
>> new file mode 100755
>> index 0000000..38635a3
>> --- /dev/null
>> +++ b/tests/btrfs/124
>> @@ -0,0 +1,261 @@
>> +#! /bin/bash
>> +# FS QA Test No. btrfs/124
>> +#
>> +# Test that an incremental send operation works after doing radical changes
>> +# in the directory hierarchy that involve switching the inode that directory
>> +# entries point to.
>> +#
>> +#-----------------------------------------------------------------------
>> +# Copyright (C) 2016 SUSE Linux Products GmbH. All Rights Reserved.
>> +# Author: Filipe Manana <fdmanana@xxxxxxxx>
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +tmp=/tmp/$$
>> +status=1 # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
> cd /
> to make it consistent with other _cleanup :)
>
>> + rm -fr $send_files_dir
>> + rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# real QA test starts here
>> +_supported_fs btrfs
>> +_supported_os Linux
>> +_require_scratch
>> +_require_fssum
>> +
>> +send_files_dir=$TEST_DIR/btrfs-test-$seq
>
> These three tests all take use of $TEST_DIR, but don't _require_test, I
> think we need it in these tests.
>
>> +
>> +rm -f $seqres.full
>> +rm -fr $send_files_dir
>> +mkdir $send_files_dir
>> +
>> +_scratch_mkfs >>$seqres.full 2>&1
>> +_scratch_mount
>> +
>> +# case 1
>> +mkdir -p $SCRATCH_MNT/case_1/d/p1
>> +mkdir $SCRATCH_MNT/case_1/p1
>> +
>> +# case 2
>> +mkdir -p $SCRATCH_MNT/case_2/a
>> +mkdir $SCRATCH_MNT/case_2/d
>> +mkdir $SCRATCH_MNT/case_2/e
>> +mkdir $SCRATCH_MNT/case_2/f
>> +mkdir $SCRATCH_MNT/case_2/ance
>> +mkdir $SCRATCH_MNT/case_2/d/ance
>> +mkdir $SCRATCH_MNT/case_2/a/c
>> +mv $SCRATCH_MNT/case_2/e $SCRATCH_MNT/case_2/d/ance
>> +mv $SCRATCH_MNT/case_2/f $SCRATCH_MNT/case_2/d/ance
>> +mv $SCRATCH_MNT/case_2/ance $SCRATCH_MNT/case_2/d/ance
>> +
>> +# case 3
>> +mkdir -p $SCRATCH_MNT/case_3/d
>> +mkdir $SCRATCH_MNT/case_3/a
>> +mkdir $SCRATCH_MNT/case_3/waiting_dir
>> +mkdir -p $SCRATCH_MNT/case_3/pre/ance
>> +mkdir $SCRATCH_MNT/case_3/d/ance
>> +mkdir $SCRATCH_MNT/case_3/a/c
>> +mv $SCRATCH_MNT/case_3/waiting_dir $SCRATCH_MNT/case_3/d/ance
>> +
>> +# case 4
>> +mkdir -p $SCRATCH_MNT/case_4/tmp
>> +mkdir $SCRATCH_MNT/case_4/below_ance
>> +mkdir -p $SCRATCH_MNT/case_4/pre/wait_dir
>> +mkdir $SCRATCH_MNT/case_4/desc
>> +mkdir $SCRATCH_MNT/case_4/ance
>> +mv $SCRATCH_MNT/case_4/below_ance $SCRATCH_MNT/case_4/ance
>> +mkdir $SCRATCH_MNT/case_4/other_dir
>> +
>> +# Filesystem looks like:
>> +#
>> +# . (ino 256)
>> +# |--- case_1/ (ino 257)
>> +# | |---- d/ (ino 258)
>> +# | | |--- p1/ (ino 259)
>> +# | |
>> +# | |---- p1/ (ino 260)
>> +# |
>> +# |--- case_2/ (ino 261)
>> +# | |---- a/ (ino 262)
>> +# | | |---- c/ (ino 268)
>> +# | |
>> +# | |---- d/ (ino 263)
>> +# | |---- ance/ (ino 267)
>> +# | |---- e/ (ino 264)
>> +# | |---- f/ (ino 265)
>> +# | |---- ance/ (ino 266)
>> +# |
>> +# |--- case_3/ (ino 269)
>> +# | |---- a/ (ino 271)
>> +# | | |---- c/ (ino 276)
>> +# | |
>> +# | |---- d/ (ino 270)
>> +# | | |---- ance/ (ino 275)
>> +# | | |---- waiting_dir/ (ino 272)
>> +# | |
>> +# | |---- pre/ (ino 273)
>> +# | |---- ance/ (ino 274)
>> +# |
>> +# |--- case_4/ (ino 277)
>> +# |---- tmp/ (ino 278)
>> +# |---- pre/ (ino 280)
>> +# | |---- wait_dir/ (ino 281)
>> +# |
>> +# |---- desc/ (ino 282)
>> +# |---- ance/ (ino 283)
>> +# | |---- below_ance/ (ino 279)
>> +# |
>> +# |---- other_dir/ (ino 284)
>> +#
>> +_run_btrfs_util_prog subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1
>
> Please avoid using _run_btrfs_util_prog and run_check, as Dave explained
> before (and I summarized them in this email
> http://www.spinics.net/lists/fstests/msg03311.html :-)
Yeah, I know that.
But for snapshot creation we always do it like that or, like in some
older tests something like:
$BTRFS_UTIL_PROG subvolume snapshot $1 $SNAPNAME > /dev/null || _fail
"snapshot create failed"
That's because the output of the snapshot command in the tools has
changed many times in the past (and sometimes radically).
>
> So just dump the output and do necessary filters to match golden image.
> I think this also makes it easier to know what's failing, the diff
> output shows it directly, there's no need to check $seqres.full again.
>
> And this test failed due to memory allocation, is this expected?
Yes. Infinite path build loops keep allocating memory in each
iteration, that's why you get enomem.
>
> At subvol /mnt/testarea/scratch/mysnap2
> ERROR: send ioctl failed with -12: Cannot allocate memory
> failed: '/usr/bin/btrfs send -p /mnt/testarea/scratch/mysnap1 /mnt/testarea/scratch/mysnap2 -f /mnt/testarea/test/btrfs-test-127/2.snap'
>
> I'm using btrfs-progs v4.6
Doesn't matter, it's exclusively a kernel side issue.
>
> Otherwise these three tests look good to me.
thanks
>
> Thanks,
> Eryu
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
