Re: btrfs replace status >100%

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Henk,
That's encouraging and what I suspected - everything looks fine (even some bitrot picked up through read error corrections on checksum failures, hurray!) and yes I'll resize the new device once it completes.

[root@array ~]# btrfs replace status -1 /export/archive/
547.9% done, 0 write errs, 0 uncorr. read errs

'btrfs filesystem usage' is nifty however also doesn't provide any hints as to progress; the replace operation is from /dev/sdb to /dev/sdj and if the Data value for /dev/sdb was gradually reducing it would make more sense, however it appears the entire operation needs to complete before the source device shows as <device size> unallocated and the destination device shows the same amount of moved chunks. Maybe that's intended due to RAID1 layout (i.e. per subvolume and not per file).

[root@array ~]# btrfs fi usage /export/archive/
Overall:
    Device size:                  46.39TiB
    Device allocated:             41.84TiB
    Device unallocated:            4.55TiB
    Device missing:                  0.00B
    Used:                         41.30TiB
    Free (estimated):              2.55TiB      (min: 2.55TiB)
    Data ratio:                       2.00
    Metadata ratio:                   2.00
    Global reserve:              512.00MiB      (used: 0.00B)

Data,RAID1: Size:20.90TiB, Used:20.63TiB
   /dev/sdb        4.55TiB
   /dev/sdc        5.45TiB
   /dev/sdd        5.46TiB
   /dev/sde        5.46TiB
   /dev/sdf        5.45TiB
   /dev/sdg        5.45TiB
   /dev/sdh        4.55TiB
   /dev/sdi        5.45TiB

Metadata,single: Size:8.00MiB, Used:0.00B
   /dev/sdc        8.00MiB

Metadata,RAID1: Size:23.00GiB, Used:22.14GiB
   /dev/sdb        1.00GiB
   /dev/sdc       10.00GiB
   /dev/sdd        1.00GiB
   /dev/sdf       11.00GiB
   /dev/sdg       11.00GiB
   /dev/sdh        1.00GiB
   /dev/sdi       11.00GiB

System,single: Size:4.00MiB, Used:0.00B
   /dev/sdc        4.00MiB

System,RAID1: Size:8.00MiB, Used:2.91MiB
   /dev/sdf        8.00MiB
   /dev/sdg        8.00MiB

Unallocated:
   /dev/sdb        1.02MiB
   /dev/sdc        5.02MiB
   /dev/sdd        1.02MiB
   /dev/sde        1.02MiB
   /dev/sdf        1.02MiB
   /dev/sdg        1.02MiB
   /dev/sdh        1.02MiB
   /dev/sdi        1.02MiB
   /dev/sdj        4.55TiB
[root@array ~]#

Here's hoping a dev can make the necessary adjustments to improve the status output .. thanks again !
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystem Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux