Hi all, I have an home server with 3 hard drives that I added to the same btrfs filesystem. Several hours ago I run `btrfs balance start -dconvert=raid0 /` and as soon as I run `btrfs fi show /` I lost my ssh connection to the machine. The machine is still on, but it doesn’t even respond to ping: I always get a request timeout and sometimes even an host is down message. Its fans are spinning at full blast and the hard drives’s led are registering activity all the time. I run Plex Home Theater too there and the display output is stuck at the time when I run those two commands. I left it running because I fear to lose everything by powering it down manually. Should I leave it like this and let it finish? How long it might take? (I have a 250gb internal hard drive, a 120gb usb 2.0 one and a 2TB usb 2.0 one so the transfer speeds are pretty low) Is it safe to power it off manually? Should I file a bug after it? Any help would be appreciated. Thanks, Carmine-- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
