On Tue, Jun 16, 2015 at 06:43:23PM +0200, Arnaud Kapp wrote: > Hello, > > Consider the following situation: I have a RAID 1 array with 4 drives. > I want to replace one the drive by a new one, with greater capacity. > > However, let's say I only have 4 HDD slots so I cannot plug the new > drive, add it to the array then remove the other one. > If there a *safe* way to change drives in this situation? I'd bet that > booting with 3drives, adding the new one then removing the old, non > connected one would work. However, is there something that could go > wrong in this situation? The main thing that could go wrong with that is a disk failure. If you have the SATA ports available, I'd consider operating the machine with the case open and one of the drives bare and resting on something stable and insulating for the time it takes to do a "btrfs replace" operation. If that's not an option, then a good-quality external USB case with a short cable directly attached to one of the USB ports on the motherboard would be a reasonable solution (with the proviso that some USB connections are just plain unstable and throw errors, which can cause problems with the filesystem code, typically requiring a reboot, and a restart of the process). You might also consider using either NBD or iSCSI to present one of the disks (I'd probably use the outgoing one) over the network from another machine with more slots in it, but that's going to end up with horrible performance during the migration. In my big disk array at home, I have two 4-slot enclosures, and I leave one of them empty specifically for this reason. It's a less attractive proposition with only 4 slots in total, though. Hugo. -- Hugo Mills | "What are we going to do tonight?" hugo@... carfax.org.uk | "The same thing we do every night, Pinky. Try to http://carfax.org.uk/ | take over the world!" PGP: E2AB1DE4 |
Attachment:
signature.asc
Description: Digital signature
