System: Thinkserver TS140 E3-1225, 32GB ECC RAM, LSI9211-8i (IT unraid), 2 WD xe SAS as mdraid-raid1-ext4, 2 WD xe SAS as btrfs-raid1 Linux xyzzy 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux btrfs-progs v3.19 btrfs fi: partition already removed, created with mkfs.btrfs -m raid1 -d raid1 -L sdmdata /dev/sdc /dev/sdd dmesg: (not a problem with crashing) Problem: Very poor file reread cache. The database I use organizes both data and keys in a single file as a btree. This means that each successive record is located randomly around the file. Reading from first to last generates a lot of seeks. On btrfs the speed is consistent throughout the whole file as it is on any system with too little memory for an effective cache. Every reread runs at the same slow and consistent speed. So I unmount btrfs, quick zero the drives, mkfs.ext4, mount, and unpack the same data and run the same test on the same drives. On ext4 (and xfs from other testing) the first time I read through the whole file it starts slow as it seeks around to uncached data and speeds up as more of the file is found in the cache. It is very fast by the end. Once in the cache I can read the file over and over super fast. The ext4 read cache is mitigating the time cost from the poor arrangement of the file. I'm the only user on this test system so nothing is clearing my 32GB. -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
