RE: Problem converting data raid0 to raid1: enospc errors during balance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hej guys!

Thanks for your input on the issue this far.

Too my knowledge raid1 in btrfs means 2 copies of each piece of data independent of the amount of disks used.

So 4 x 2,73tb would result in a totaal storage of roughly 5,5tb right?

Shouldn't this be more then enough?

btw, here is the output for df:

http://paste.debian.net/128932/


----------------------------------------
> Date: Mon, 27 Oct 2014 12:49:15 +0800
> From: quwenruo@xxxxxxxxxxxxxx
> To: lists@xxxxxxxxxxxxxxxxx
> CC: jverberk@xxxxxxxxxxx; linux-btrfs@xxxxxxxxxxxxxxx
> Subject: Re: Problem converting data raid0 to raid1: enospc errors during balance
>
>
> -------- Original Message --------
> Subject: Re: Problem converting data raid0 to raid1: enospc errors
> during balance
> From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
> To: Qu Wenruo <quwenruo@xxxxxxxxxxxxxx>
> Date: 2014年10月27日 12:40
>> On Oct 26, 2014, at 7:40 PM, Qu Wenruo <quwenruo@xxxxxxxxxxxxxx> wrote:
>>
>>> Hi,
>>>
>>> Although I'm not completely sure, but it seems that, you really ran out of space.
>>>
>>> [1] Your array won't hold raid1 for 1.97T data
>>> Your array used up 1.97T raid0 data, it takes 1.97T for raid0.
>>> But if converted to 1.97T, it will occupy 1.97T X2 = 3.94T.
>>> Your array are only 2.73T, it is too small to contain the data.
>> I'm not understanding. The btrfs fi show, shows 4x 2.73TiB devices, so that seems like it's a 10+TiB array.
>>
>> There's 2.04TiB raid0 data chunks, so roughly 500GiB per device, yet 1.94TiB is reported used per device by fi show. Confusing.
>>
>> Also it's still very confusing: Data, RAID1: total=2.85TiB, used=790.46GiB whether this means 2.85TiB out of 10TiB is allocated, or if it's twice that due to raid1. I can't ever remember this presentation detail, so again the secret decode ring where the UI doesn't expressly tell us what's going on is going to continue to be a source of confusion for users.
>>
>>
>> Chris Murphy
> Oh, I misread the output....
>
> That turns strange now....
> BTW what's the output of 'df' command?
>
> Thanks,
> Qu
>
 		 	   		  抅{.n++%演欟w{.n+轡{往k~屮^nr*zh◑?&゠z推z閤++zf▶h~i裹z_莅j:+v?)滷m





[Index of Archives]     [Linux Filesystem Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux