After the seed device has been replaced the new target device
is no more a seed device. So we need to bring that state in
the fs_devices.
reproducer:
mount /dev/sdb /btrfs
btrfs dev add /dev/sdc /btrfs
btrfs rep start -B /dev/sdb /dev/sdd /btrfs
umount /btrfs
WARNING: CPU: 0 PID: 12661 at fs/btrfs/volumes.c:891 __btrfs_close_devices+0x1b0/0x200 [btrfs]()
::
__btrfs_close_devices()
::
WARN_ON(fs_devices->open_devices);
WARN_ON(fs_devices->rw_devices);
per the btrfs-devlist tool (to dump fs_devices and
btrfs_device from the kernel) the num_device, open_devices,
rw_devices are still at 1 but the total_device is at 2,
even after the seed device has been replaced in the above example.
Signed-off-by: Anand Jain <anand.jain@xxxxxxxxxx>
---
fs/btrfs/dev-replace.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index eea26e1..a144bb1 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -569,6 +569,19 @@ static int btrfs_dev_replace_finishing(struct btrfs_fs_info *fs_info,
btrfs_rm_dev_replace_blocked(fs_info);
+ /*
+ * if we are replacing a seed device with a writable device
+ * then FS won't be a seeding FS any more.
+ */
+ if (src_device->fs_devices->seeding && !src_device->writeable) {
+ fs_info->fs_devices->rw_devices++;
+ fs_info->fs_devices->num_devices++;
+ fs_info->fs_devices->open_devices++;
+
+ fs_info->fs_devices->seeding = 0;
+ fs_info->fs_devices->seed = NULL;
+ }
+
btrfs_rm_dev_replace_srcdev(fs_info, src_device);
btrfs_rm_dev_replace_unblocked(fs_info);
--
2.0.0.153.g79dcccc
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
