Roman Mamedov posted on Sun, 09 Feb 2014 04:10:50 +0600 as excerpted:
> If you need to perform a btrfs-specific operation, you can easily use
> the btrfs-specific tools to prepare for it, specifically use "btrfs fi
> df" which could give provide every imaginable interpretation of free
> space estimate and then some.
>
> UNIX 'df' and the 'statfs' call on the other hand should keep the
> behavior people are accustomized to rely on since 1970s.
Which it does... on filesystems that only have 1970s filesystem features.
=:^)
RAID or multi-device filesystems aren't 1970s features and break 1970s
behavior and the assumptions associated with it. If you're not prepared
to deal with those broken assumptions, don't. Use mdraid or dmraid or lvm
or whatever to combine your multiple devices into one logical devices as
presented, and put your filesystem (either traditional filesystem, or
even btrfs using traditional single-device functionality) on top of the
single device the layer beneath the filesystem presents. Problem solved!
=:^)
Note that df only lists a single device as well, not the multiple
component devices of the filesystem. That's broken functionality by your
definition, too, and again, using some other layer like lvm or mdraid to
present multiple devices as a single virtual device, with a traditional
single-device filesystem layout on top of that single device... solves
the problem!
Meanwhile, what I've done here is use one of df's commandline options to
set its block size to 2 MiB, and further used bash's alias functionality
to setup an alias accordingly:
alias df='df -B2M'
$ df /h
Filesystem 2M-blocks Used Available Use% Mounted on
/dev/sda6 20480 12186 7909 61% /h
$ sudo btrfs fi show /h
Label: hm0238gcnx+35l0 uuid: ce23242a-b0a9-423f-a9c3-7db2729f48d6
Total devices 2 FS bytes used 11.90GiB
devid 1 size 20.00GiB used 14.78GiB path /dev/sda6
devid 2 size 20.00GiB used 14.78GiB path /dev/sdb6
$ sudo btrfs fi df /h
Data, RAID1: total=14.00GiB, used=11.49GiB
System, RAID1: total=32.00MiB, used=16.00KiB
Metadata, RAID1: total=768.00MiB, used=414.94MiB
On btrfs such as the above I can read the 2M blocks as 1M and be happy.
On btrfs such as my /boot, which aren't raid1 (I have two separate
/boots, one on each device, with grub2 configured separately for each to
provide a backup), or if I df my media partitions still on reiserfs on
the old spinning rust, I can either double the figures DF gives me, or
add a second -B option at the CLI, overriding the aliased option.
If I wanted something fully automated, it'd be easy enough to setup a
script that checked what filesystem I was df-ing, matched that against a
table of filesystems to preferred df block sizes, and supplied the
appropriate -BxX option accordingly. As I guess most admins after a few
years, I've developed quite a library of scripts/aliases for various
things I do routinely enough to warrant it, and this would be just one
more joining the list. =:^)
But of course it's your system in question, and you can patch btrfs to
output anything you like, in any format you like. No need to bother with
df's -B option if you'd prefer to patch the kernel instead. Me, I'll
stick to the -B option. =:^)
--
Duncan - List replies preferred. No HTML msgs.
"Every nonfree program has a lord, a master --
and if you use the program, he is your master." Richard Stallman
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
