On 12/29/2013 04:11 PM, Kai Krakow wrote:
> Hello list!
>
> I'm planning to buy a small SSD (around 60GB) and use it for bcache in front
> of my 3x 1TB HDD btrfs setup (mraid1+draid0) using write-back caching. Btrfs
> is my root device, thus the system must be able to boot from bcache using
> init ramdisk. My /boot is a separate filesystem outside of btrfs and will be
> outside of bcache. I am using Gentoo as my system.
>
> I have a few questions:
>
> * How stable is it? I've read about some csum errors lately...
>
> * I want to migrate my current storage to bcache without replaying a backup.
> Is it possible?
>
> * Did others already use it? What is the perceived performance for desktop
> workloads in comparision to not using bcache?
>
> * How well does bcache handle power outages? Btrfs does handle them very
> well since many months.
>
> * How well does it play with dracut as initrd? Is it as simple as telling it
> the new device nodes or is there something complicate to configure?
>
> * How does bcache handle a failing SSD when it starts to wear out in a few
> years?
>
> * Is it worth waiting for hot-relocation support in btrfs to natively use
> a SSD as cache?
>
> * Would you recommend going with a bigger/smaller SSD? I'm planning to use
> only 75% of it for bcache so wear-leveling can work better, maybe use
> another part of it for hibernation (suspend to disk).
I've actually tried a simmilar configuration myself a couple of times
(also using Gentoo in-fact), and I can tell you from experience that
unless things have changed greatly since kernel 3.12.1, it really isn't
worth the headaches. Setting it up on an already installed system is a
serious pain because the backing device has to be reformatted with a
bcache super-block. In addition, every kernel that I have tried that
had bcache compiled in or loaded as a module had issues, I would see a
kernel OOPS on average once a day from the bcache code, usually followed
shortly by a panic from some other unrelated subsystem. I didn't get
any actual data corruption, but I wasn't using btrfs at the time for any
of my filesystems.
As an alternative to using bcache, you might try something simmilar to
the following:
64G SSD with /boot, /, and /usr
Other HDD with /var, /usr/portage, /usr/src, and /home
tmpfs or ramdisk for /tmp and /var/tmp
This is essentially what I use now, and I have found that it
significantly improves system performance.
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
