2011-04-09 10:11:41 +0100, Hugo Mills:
[...]
> > # df /srv/MM
> >
> > Filesystem 1K-blocks Used Available Use% Mounted on
> > /dev/sdd1 5846053400 1593436456 2898463184 36% /srv/MM
> >
> > # btrfs filesystem df /srv/MM
> >
> > Data, RAID0: total=1.67TB, used=1.48TB
> > System, RAID1: total=16.00MB, used=112.00KB
> > System: total=4.00MB, used=0.00
> > Metadata, RAID1: total=3.75GB, used=2.26GB
> >
> > # btrfs-show
> >
> > Label: MMedia uuid: 120b036a-883f-46aa-bd9a-cb6a1897c8d2
> > Total devices 3 FS bytes used 1.48TB
> > devid 3 size 1.81TB used 573.76GB path /dev/sdb1
> > devid 2 size 1.81TB used 573.77GB path /dev/sde1
> > devid 1 size 1.82TB used 570.01GB path /dev/sdd1
> >
> > Btrfs Btrfs v0.19
> >
> > ------------------------------------------------
> >
> > "df" shows an "Available" value which isn't related to any real value.
>
> I _think_ that value is the amount of space not allocated to any
> block group. If that's so, then Available (from df) plus the three
> "total" values (from btrfs fi df) should equal the size value from df.
[...]
Well,
$ echo $((2898463184 + 1.67*2**30 + 4*2**10 + 16*2**10*2 + 3.75*2**20*2))
4699513214.0799999
I do get the same kind of discrepancy:
$ df -h /mnt
Filesystem Size Used Avail Use% Mounted on
/dev/sdb 8.2T 3.5T 3.2T 53% /mnt
$ sudo btrfs fi show
Label: none uuid: ...
Total devices 3 FS bytes used 3.43TB
devid 4 size 2.73TB used 1.17TB path /dev/sdc
devid 3 size 2.73TB used 1.17TB path /dev/sdb
devid 2 size 2.70TB used 1.14TB path /dev/sda4
$ sudo btrfs fi df /mnt
Data, RAID0: total=3.41TB, used=3.41TB
System, RAID1: total=16.00MB, used=232.00KB
Metadata, RAID1: total=35.25GB, used=20.55GB
$ echo $((3.2 + 3.41 + 2*16/2**20 + 2*35.25/2**10))
6.6788476562500003
--
Stephane
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
