Re: [PATCH v2 1/2] clocksource: npcm: add NPCM7xx timer driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Looks like you missed a couple of comments from Daniel:
https://www.spinics.net/lists/devicetree/msg196683.html

Also, I think the binding documentation is supposed to come before the driver.

On Wed, Nov 1, 2017 at 5:16 AM, Tomer Maimon <tmaimon77@xxxxxxxxx> wrote:
> Add Nuvoton BMC NPCM7xx timer driver.
>
> the clocksource Enable 24-bit TIMER0 and TIMER1 counters,
> while TIMER0 serves as clockevent and TIMER1 serves as clocksource.
>
> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> ---
>  drivers/clocksource/Kconfig         |   8 ++
>  drivers/clocksource/Makefile        |   1 +
>  drivers/clocksource/npcm7xx-timer.c | 224 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 233 insertions(+)
>  create mode 100644 drivers/clocksource/npcm7xx-timer.c

Looks like you forgot to rename the driver.

>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cc6062049170..46184af75d6c 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -140,6 +140,14 @@ config VT8500_TIMER
>         help
>           Enables support for the VT8500 driver.
>
> +config NPCM7XX_TIMER
> +       bool "NPCM7xx timer driver" if COMPILE_TEST
> +       depends on HAS_IOMEM
> +       select CLKSRC_MMIO
> +       help
> +         Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx arcithcture,
> +         While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
> +
>  config CADENCE_TTC_TIMER
>         bool "Cadence TTC timer driver" if COMPILE_TEST
>         depends on COMMON_CLK
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index dbc1ad14515e..f2a9318a1eec 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_CLKSRC_TI_32K)   += timer-ti-32k.o
>  obj-$(CONFIG_CLKSRC_NPS)       += timer-nps.o
>  obj-$(CONFIG_OXNAS_RPS_TIMER)  += timer-oxnas-rps.o
>  obj-$(CONFIG_OWL_TIMER)                += owl-timer.o
> +obj-$(CONFIG_NPCM7XX_TIMER)    += npcm7xx-timer.o
>
>  obj-$(CONFIG_ARC_TIMERS)               += arc_timer.o
>  obj-$(CONFIG_ARM_ARCH_TIMER)           += arm_arch_timer.o
> diff --git a/drivers/clocksource/npcm7xx-timer.c b/drivers/clocksource/npcm7xx-timer.c
> new file mode 100644
> index 000000000000..d1ea5c183a69
> --- /dev/null
> +++ b/drivers/clocksource/npcm7xx-timer.c
> @@ -0,0 +1,224 @@
> +
> +/*
> + * Copyright (c) 2017 Nuvoton Technology corporation.
> + * Copyright 2017 Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation;version 2 of the License.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/sched.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/clockchips.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_address.h>
> +
> +struct npcm7xx_clockevent_data {
> +       struct clock_event_device cvd;
> +       void __iomem *timer_base;
> +       unsigned int rate;
> +};
> +
> +/* Timers registers */
> +#define NPCM7XX_REG_TCSR0      0x0 /* Timer 0 Control and Status Register */
> +#define NPCM7XX_REG_TICR0      0x8 /* Timer 0 Initial Count Register */
> +#define NPCM7XX_REG_TCSR1      0x4 /* Timer 1 Control and Status Register */
> +#define NPCM7XX_REG_TICR1      0xc /* Timer 1 Initial Count Register */
> +#define NPCM7XX_REG_TDR1       0x14 /* Timer 1 Data Register */
> +#define NPCM7XX_REG_TISR       0x18 /* Timer Interrupt Status Register */
> +
> +/* Timers control */
> +#define NPCM7XX_Tx_RESETINT            0x1f
> +#define NPCM7XX_Tx_PERIOD              BIT(27)
> +#define NPCM7XX_Tx_INTEN               BIT(29)
> +#define NPCM7XX_Tx_COUNTEN             BIT(30)
> +#define NPCM7XX_Tx_ONESHOT             0x0
> +#define NPCM7XX_Tx_OPER                        GENMASK(3, 27)
> +#define NPCM7XX_Tx_MIN_PRESCALE                0x1
> +#define NPCM7XX_Tx_TDR_MASK_BITS       24
> +#define NPCM7XX_Tx_MAX_CNT             0xFFFFFF
> +#define NPCM7XX_T0_CLR_INT             0x1
> +#define NPCM7XX_Tx_CLR_CSR             0x0
> +
> +/* Timers operating mode */
> +#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
> +                                       NPCM7XX_Tx_INTEN | \
> +                                       NPCM7XX_Tx_MIN_PRESCALE)
> +
> +#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
> +                                       NPCM7XX_Tx_INTEN | \
> +                                       NPCM7XX_Tx_MIN_PRESCALE)
> +#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
> +                               NPCM7XX_Tx_MIN_PRESCALE)
> +
> +static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
> +{
> +       u32 val;
> +       struct npcm7xx_clockevent_data *cevtd =
> +               container_of(evt, struct npcm7xx_clockevent_data, cvd);
> +
> +       val = readl(cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +       val &= ~NPCM7XX_Tx_OPER;
> +
> +       val = readl(cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +       val |= NPCM7XX_START_ONESHOT_Tx;
> +       writel(val, cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +
> +       return 0;
> +}
> +
> +static int npcm7xx_timer_periodic(struct clock_event_device *evt)
> +{
> +       struct npcm7xx_clockevent_data *cevtd =
> +               container_of(evt, struct npcm7xx_clockevent_data, cvd);
> +       u32 val;
> +
> +       val = readl(cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +       val &= ~NPCM7XX_Tx_OPER;
> +
> +       writel((cevtd->rate / HZ), cevtd->timer_base + NPCM7XX_REG_TICR0);
> +       val |= NPCM7XX_START_PERIODIC_Tx;
> +
> +       writel(val, cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +
> +       return 0;
> +}
> +
> +static int npcm7xx_clockevent_setnextevent(unsigned long evt,
> +               struct clock_event_device *clk)
> +{
> +       struct npcm7xx_clockevent_data *cevtd =
> +               container_of(clk, struct npcm7xx_clockevent_data, cvd);
> +       u32 val;
> +
> +       writel(evt, cevtd->timer_base + NPCM7XX_REG_TICR0);
> +       val = readl(cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +       val |= NPCM7XX_START_Tx;
> +       writel(val, cevtd->timer_base + NPCM7XX_REG_TCSR0);
> +
> +       return 0;
> +}
> +
> +static struct npcm7xx_clockevent_data npcm7xx_clockevent_data = {
> +       .cvd = {
> +               .name               = "npcm7xx-timer0",
> +               .features           = CLOCK_EVT_FEAT_PERIODIC |
> +                                     CLOCK_EVT_FEAT_ONESHOT,
> +               .set_next_event     = npcm7xx_clockevent_setnextevent,
> +               .set_state_shutdown = npcm7xx_timer_oneshot,
> +               .set_state_periodic = npcm7xx_timer_periodic,
> +               .set_state_oneshot  = npcm7xx_timer_oneshot,
> +               .tick_resume        = npcm7xx_timer_oneshot,
> +               .rating             = 300
> +       },
> +};
> +
> +static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
> +{
> +       struct npcm7xx_clockevent_data *cevtd = dev_id;
> +       struct clock_event_device *evt = &cevtd->cvd;
> +
> +       writel(NPCM7XX_T0_CLR_INT, cevtd->timer_base + NPCM7XX_REG_TISR);
> +
> +       if (evt->event_handler) {

I think Daniel was implying this is impossible or at least deserves a comment.
I think I originally added this check to make the driver not crash when I was
ripping out some of the HAL dependencies. I did not think about it too hard, so
this might need some looking into.

> +               evt->event_handler(evt);
> +               return IRQ_HANDLED;
> +       }
> +
> +       return IRQ_NONE;
> +}
> +
> +static struct irqaction npcm7xx_timer0_irq = {
> +       .name           = "npcm7xx-timer0",
> +       .flags          = IRQF_TIMER | IRQF_IRQPOLL,
> +       .handler        = npcm7xx_timer0_interrupt,
> +       .dev_id         = &npcm7xx_clockevent_data,
> +};
> +
> +static void __init npcm7xx_clockevents_init(int irq, u32 rate)
> +{
> +       writel(NPCM7XX_Tx_CLR_CSR,
> +               npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TCSR0);
> +
> +       writel(NPCM7XX_Tx_RESETINT,
> +               npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TISR);
> +       setup_irq(irq, &npcm7xx_timer0_irq);
> +       npcm7xx_clockevent_data.cvd.cpumask = cpumask_of(0);
> +
> +       clockevents_config_and_register(&npcm7xx_clockevent_data.cvd, rate,
> +                                       0x1, NPCM7XX_Tx_MAX_CNT);
> +}
> +
> +static void __init npcm7xx_clocksource_init(u32 rate)
> +{
> +       u32 val;
> +
> +       writel(NPCM7XX_Tx_CLR_CSR,
> +               npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TCSR1);
> +       writel(NPCM7XX_Tx_MAX_CNT,
> +               npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TICR1);
> +
> +       val = readl(npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TCSR1);
> +       val |= NPCM7XX_START_Tx;
> +       writel(val, npcm7xx_clockevent_data.timer_base + NPCM7XX_REG_TCSR1);
> +
> +       clocksource_mmio_init(npcm7xx_clockevent_data.timer_base +
> +                               NPCM7XX_REG_TDR1,
> +                               "npcm7xx-timer1", rate,
> +                               300, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
> +                               clocksource_mmio_readl_down);
> +}
> +
> +static int __init npcm7xx_timer_init(struct device_node *np)
> +{
> +       struct clk *clk;
> +       int irq, ret;
> +       u32 rate;
> +
> +       irq = irq_of_parse_and_map(np, 0);

Looks like this, the base addr, and possibly the clock is common with what
timer_of_init does.

> +       if (!irq)
> +               return -EINVAL;
> +
> +       npcm7xx_clockevent_data.timer_base = of_iomap(np, 0);
> +       if (!npcm7xx_clockevent_data.timer_base)
> +               return -ENXIO;
> +
> +       clk = of_clk_get(np, 0);
> +
> +       if (IS_ERR(clk)) {
> +               ret = of_property_read_u32(np, "clock-frequency", &rate);
> +               if (ret)
> +                       goto err_iounmap;
> +       } else {
> +               clk_prepare_enable(clk);
> +               rate = clk_get_rate(clk);
> +       }
> +
> +       /* Clock input is divided by PRESCALE + 1 before it is fed */
> +       /* to the counter */
> +       rate = rate / (NPCM7XX_Tx_MIN_PRESCALE + 1);
> +
> +       npcm7xx_clockevent_data.rate = rate;
> +
> +       npcm7xx_clocksource_init(rate);
> +       npcm7xx_clockevents_init(irq, rate);
> +
> +       pr_info("Enabling NPCM7xx clocksource timer base: %p, IRQ: %u\n",
> +               npcm7xx_clockevent_data.timer_base, irq);
> +
> +       return 0;
> +
> +err_iounmap:
> +       iounmap(npcm7xx_clockevent_data.timer_base);
> +       return ret;
> +
> +}
> +
> +TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm7xx-timer", npcm7xx_timer_init);
> +
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux