Browse by Catagory:
|
Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron
Sales rank: 1318
1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
Use to pump out flooded basements, tanks, or boats
Made from durable cast iron steel
Connects to garden hose with 3/4-inch brass hose connections
1-year limited warranty
Model PC4 has a high speed motor that delivers high-flow capacity that can be used to pump water from flooded basements, empty boats, drain stock tanks or water lawns and gardens. It can also be used to boost line pressure by as much as 50 PSI for power washing cars, sidewalks, and more. Will supply one to two sprinkler heads and 100 feet of garden hose. Easy-access handle for complete portability. A suction strainer is included with each pump. U.S.A. Flow (GPH): 1,450, Volts: 115, HP: 1/2, Max. Total Head (ft.): 100, Max. Suction Lift (ft.): 15, Suction Port (in.): 3/4, Discharge Port (in.): 3/4, Self-Priming: Yes, Pump Housing: Cast Iron, Impeller Shaft: ThermoplasticThe Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It's made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty. |
|
PowerMax 2" Intake 6.5 HP OHV 158 GPM Gas Powered Water Pump (CARB Compliant) #XP652WP
Sales rank: 10487
1 Gallon Gas Tank/2.4 Hour Run Time
Back Flow Check Valve
Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench
EPA And CARB Approved
Automatic Low Oil Shut Off
Move Huge Volumes of Water with this Smooth Running, Easy Starting, Long Lasting Pump Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach & more uses. This PowerMax 2" water pump has a Real 2" NPT fitting so you can use your regular hoses on it. Our competitors on eBay do not have the 2" NPT thread, but have metric instead. So when you put your hose on, you have to cut the end off and put a hose clamp on the hose to hold it on to the pump. Not with this pump, it is ready to pump water out and is EPA and CARB approved. This means it is held to the highest standards and meets California high emission standards, along with the rest of the United States standards for motors. Don't be fooled into buying a junk water pump for the same money as ours. It also has an One Year Warranty. You have nothing to lose, only to gain with the PowerMax Water Pump. FEATURES *Durable 6.5 Hp. Air cooled OHV gasoline engine w low oil shutoff and idle control *EPA & CARB approved with 2'' ID intake & outlet w back flow check valve *Pump overhead lift: 91 ft., Suction height: 26 ft *Gallons per minute: 158 gpm. + .6 gallon fuel cap *2.4 hour run time on a single tank of gas INCLUDES intake hose end strainer, threaded hose ends connectors & clamps, tool kit w plug wrench." PowerMax - One Year Warranty & 30 Day Satisfaction Guarantee. |
|
Ultra-Portable 3,200 GPH Gas-Powered Water Pump - Just 28 Lbs!
Sales rank: 19407
Big water-moving power in compact, easy-to-move size - no electricity needed!
Quiet and smooth EPA-approved 2.5 HP four-stroke engine with reliable transistorized ignition
Small footprint (12"W x 12"L x 14"H) fits anywhere easy to store balanced carry handle
1-1/2" inlet/outlet moves up to 3,200 gallons-per-hour with 13' suction lift, 75' head lift
Simple to operate; includes hose connectors, clamps, gaskets and intake strainer
When you need to move a lot of water fast--emergency or not--you can't always count on a convenient supply of electricity. This great little clear-water pump supplies it's own power but doesn't take up a lot of room doing it. Well-designed and ruggedly built to provide years of reliable pumping. EPA-approved single cylinder air-cooled 3800 max RPM gas engine with low-oil cut-off, non-contact transistorized ignition, easy recoil start, choke, throttle and on/off. Fuel capacity 1.4L (1.5-2.0 hrs runtime); .4L SF15-40 oil. Centrifugal clear-water pump (requires priming), maximum solid 5/32" diameter. One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee. |
|
Drill-Powered Water Pump - Use-Anywhere Emergency Water Pump that Fits in Your Toolbox!
Sales rank: 8449
Ingenious power tool accessory - life-saver when you need to move water; compact and easy to carry
Works with any power drill - insert 1/4" impeller shaft in chuck, attach hoses and pump!
Rugged and lightweight polypropylene housing with durable nylon impeller
Up to 12' lift, pump head up to 100'; shoulder slots allow for base mounting, 5/8" hose fittings
Pumps up to 3 gallons/minute depending on drill speed, lift head distance 4.5"W x 3"L x 3"H, 7 oz
Great for quick water transfer, emptying containers, small pond drainage or minor flooding/spillage clean up. For best results, fill pump with water to prime pump-suction prior to pumping. Not for use with drinking water, chemicals or petroleum products. Hoses not included, drill not included. |
|
Blue Max 6.5 HP Gas Powered 3-Inch Water Pump (Non-CARB Compliant) #3365
Sales rank: 24785
Inlet and out inside diameter: 3"
Pump lift(m): 28/92
suction height(m): 8/26
Continuous Operating: 2.4 Hours
This item is not for sale in California/Non CARB compliant
Continuous Operating: 2.4 Hours/ Output height (L/min)(gal/min): 1/264/ suction height(m): 8/26/ Pump lift(m): 28/92 |
|
G T Water #WP10 Pump A Lot Water Pump
Sales rank: 73285
G T Water #WP10 Pump A Lot Water Pump
G T WATER PRODUCTS
Pump-A- Lot, Water Powered Water Pump, Uses No Electricity, Attach A Garden Hose To 1 Side & A 1-1/2" Discharge Hose To The Other, Utilizes Water From Garden Hose To Create Suction To Drain Water, Will Lift Up To 8' & Remove Up To 800 Gallons Per Hour, Use In Basements, Pools, Pool Covers Aquariums, Spa, Tubs, Ponds & Any Flooded Area. |
|
Fimco Diaphragm Pump 12 Volt, 45 PSI, 3.8 GPM
Sales rank: 30002
Fimco Gold Series High-Flo Triplex Diaphragm Pump
Demand Switch - Operates only when liquid flow is required
Volts: 12 VDC
Max. Flow: 3.8 GPM
Max. pressure: 45 PSI
Replacement pump for spot sprayers, liquid fertilizer units, planters or back up water systems - Can also be used for potable water - 11.0 Amps - Pump and motor stop instantly when discharge is closed - Diaphragm: Santoprene - Check Valve: Viton - Ports: Quick attach, with 2 polypropylene fittings supplied - Fittings: 1/2 NPT & 1/2 Male Hose Barb - Includes On/Off switch - Max. fluid temperature: 110°F - Pump can run indefinitely without damage - Ball bearing drive, assures longer pump life - Excellent self-priming capability - Permanent magnetic motor - long life brushes - Diaphragm design eliminates troublesome shaft seal - Replaces Fimco Model #5275017 - Roundup? Ready - Weight: 4.5 lbs |
|
Heavy-Duty High Volume Hand Water Pump - 7.4 Gallons-Per-Minute without Electricity or Gas!
Sales rank: 6182
Heavy-duty, high-capacity water-pumping power - no electricity or gas engine needed!
Rugged and durable cast-iron construction; pre-drilled mounting holes for permanent installation
Dual outlets - 1-7/8" for high-volume or 1-1/4" for higher pressure; 1-1/4" bottom inlet
Maximum suction head 30', working suction head 23'; pumping head 48'; efficient pump mechanism
Great for remote locations without power; move lots of water without increasing your carbon footprin
Simple to use and efficient, this tough little pump can produce outflow of up to 7.4 gallons/minute with just your arm power and a few calories. Built-in priming port for quick-start pumping; includes inlet/outlet adapters to fit 1" PVC pipe. Maximum suction head (lift-height capacity from water source) 30'/9M, working suction head 23'/7M; maximum pump head (maximum outlet-height from pump) 48'/15M. Female-threaded bottom inlet, 1-1/4" ID; male-threaded outlets 1-7/8" OD and 1-1/4" OD with matching caps. Dimensions: 18" to top of pump without handle, 7" x 4" base mounting hole pattern for 3/8" bolts (not included); 33 lbs. 20"-length x 7/8"-diameter steel-tube handle with soft grip provides excellent leverage with efficient range-of-motion. Comes mostly assembled and includes inlet/outlet adapters, gaskets and extra diaphragm. One-year warranty. |
|
5.5 HP 9,500 GPH 2" Water Transfer Pump - EPA Approved Low-Emission Engine
Sales rank: 32641
Reliable, commercial-grade 5.5 HP OHV engine, EPA low-emission requirement
Compact and lightweight (63 lbs) for fast and easy transport and set up
Self-priming pump, die-cast aluminum housing, cast-iron impeller for long service-life
25' suction lift; 90' pump/head lift
Designed and manufactured to move large volumes of clear or dirty water quickly, efficiently and inexpensively. 9,500 gallons-per-hour capacity, 2" inlet and outlet . Durable and smooth-running OHV 5.5 HP (4-stroke), cast-iron cylinder sleeve for long service life; EPA-approved for low-emission requirements. One-gallon fuel capacity, welded steel frame, isolation mounts. Strong and lightweight die-cast aluminum pump housing with cast-iron impeller. 63 lbs, ships UPS. |
|
Pacer Water Pump - 8700 GPH, 3.5 HP, 2in., Model# SEB2PLE3C
Sales rank: 45000
Engine: 3.5 HP Briggs and Stratton engine
Pump is self-priming
Maximum Total Head: 100ft.
Maximum Suction Lift: 25ft.
2in. suction/discharge ports
Water and chemical transfer pump is powered by a 3.5 HP Briggs engine. 100ft. head and self-priming thermo plastic pump with glass reinforced polyester housing. Ideal for clear water, chemical and herbicide transfer. Carrying handle. EPDM O-rings and seals. U.S.A. |
|
|
|