Browse by Catagory:
|
Rockler 10'' Wooden Hand Screw Clamp
Sales rank: 7653
Hardwood jaws.
Throat depth: 5".
Maximum jaw opening is 6-1/8".
Classic wooden clamp design allows you to offset and/or angle the jaws however you need to keep parts from shifting. Hardwood jaws are perfect for clamping delicate parts without marring. Solid steel clamping elements with hardwood handles. Maximum jaw opening is 6-1/8". Throat depth is 5".
|
|
All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track
Sales rank: 321
T-track accepts all the accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs
T-track accepts all accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs etc.
All in one clamps are all the same height the thickness matches 3/4 plywood
Scale ruler available in metric or inch
Jaws holes accept accessories:tall jaws wide jaws story sticks
The Single Clamp is a simple and straight forward tool. Most commonly used as a straight edge guide for making clean cuts with your circular saw and router. Other uses include but not limited to; a fence for a table saw and drill press.The E. Emerson Tool Company A-50 All-in-One 50-Inch Grip Clamp Guide uses edge to edge clamps that are quickly adjustable and low profile, unobtrusive jaws to secure wood while staying out of your way. The tall, wide jaws provide flexibility, and the jaw holes accept steel jaw teeth for use on steel tables, and the scale ruler can be used for metric or inch measurements. The built-in T-track accommodates all manner of accessories, such as router plates, stop blocks, and jigs. The clamp thickness matches 3/4-inch plywood sheets, and a micro-adjustable stop provides superior precision in a tool given 5 stars by Popular Woodworking magazine. |
|
Kreg RAC Right Angle Clamp
Sales rank: 129
Securely holds work pieces at a 90 degree angle
Two arms swivel to adjust to work piece dimensions and anchor work pieces
4-1/2 inch reach for added flexibility
Easy release handle simplifies operation
WE NEED THE CORRECT IMAGE FOR THIS (THE RIGHT ANGLE CLAMP IS SHOWN, BUT IS ALREADY ON AMAZON). SEEMS LIKE 34445 MIGHT BE THE SAME CLAMP? AT LEAST THE IMAGE MIGHT BE USEABLE.
Large face clamp reaches up to 6" and ensures a perfectly flush joint every time! Large pad keeps clamp from marring wood. Perfect for flat stock such as face frames, mitered picture frames and other similar joints.The Kreg Right Angle Clamp holds work pieces at a 90 degree angle. It has a steel dowel on one arm to fit into the pockethole and anchoring your work piece against the second work piece to be joined. An opposite arm has a 180 degree swiveling pad that automatically adjusts to the dimensions of the work piece while you finish the joint by driving a screw into the adjacent pocket hole. This clamp with a 4-1/2-inch reach and easy release handle is particularly useful for assembling box joints and joining a cabinet carcass to face frames. |
|
Quick-Grip 53006 Micro Clamp
Sales rank: 8821
4-1/4" max. jaw opening, 1-3/16" throat depth
Soft, durable pads protect delicate work, great for hobby work
Lightweight, strong, high-tech resin material
Handles designed for comfortable hand-span
Easily converts to a spreader
Quick-Grip&tmreg., 4-1/2" Micro Clamp/Spreader, 4-1/2"/114MM Jaw Opening, Ideal For Craft & Hobby Work, Protects Even The Lightest Materials Such As Balsa Wood, Made From Lightweight Strong High Tech Resin Material With Durable Pads To Protect Delicate Work, Easily Converts To A Spreader. |
|
Denali 2-Inch Metal Spring Clamp, 10-Pack
Sales rank: 1234
Light-duty general purpose clamps
Soft polyvinyl tips won't mar or damage work surface
Nickel-plated stamped metal construction provides strength
Includes: Ten 2-inch metal spring clamps
Heavy duty cold-formed spring for longer life
General purpose 2-inch metal spring clamps with soft polyvinyl tips won't mar or damage your work surface, and the nickel-plated, stamped metal construction provides the strength you require for tight clamping. The clamp features a cold-formed spring for longer life. Comes in packs of 10. |
|
Bessey VAS23 Vario Angle Strap Clamp
Sales rank: 825
Reciprocal gears
Woven polyester strap
High-tensile strength
Swiveling pressure plates
23-foot capacity
Variable Angle Strap Clamp, Is More Functional & Convenient, Corner Clip With Variable Angle Swivel Pads Clamps Any & All Angles From 60 Degrees To 180 Degrees, Four Clips Are Included With The Clamp, 23' Polyester Strap Woven Like A Seat Belt, Up To 1,100 LBS Tensile Strength With Minimal Stretch, Easy To Use Strap Lock Mechanism Releases & Locks Strap Around Awkward Or Large Assemblies, Strap Winder Stores Strap Tangle Free & Out From Under Foot. |
|
Pony 8510BP Cabinet Claw (2-Pack)
Sales rank: 1118
2-pack of cabinet claw clamps; no removal until installation is complete; 1/8-inch standard drill bit
Strong-holding clamps work with stiles from 1-1/2 to 2 inches wide and up to 1-1/2-inches thick
Lightweight, rugged aluminum claws and plates; protective felt pads, zinc-plated screws, plastic handles
Sold as pair
4-inch opening capacity; 1-year warranty
Fast, easy cabinet installation with dual purpose clamping functions; two-way clamping for tightening and aligning face frames, pre-drilling placement guide for accurate pilot hole drilling and screw fastening. Includes pilot drill bit and non-marring pad protectors.Cabinet installation can be a bear, but this clamp set makes it more than bearable. The unique design is like another pair of hands that grip while you align and tighten the stiles, pre-drill and fasten, and the clamps stay put through the entire process. The drill guides and pilot holes ensure that the 1/8-inch bit (included) hits the mark time after time. We like the professional quality: lightweight but rugged aluminum claws and alignment plates, protective rubber pads that won't mar your work, 1/2-inch diameter zinc-plated, cold-drawn steel screws with smooth Acme threads. The plastic handles even have grooves for a great grip. These clamps will work with stiles from 1-1/2 to 2 inches wide and up to an impressive 1-1/2 inches thick. We think it's well worth the price if you're working alone, whether you're a professional or a home do-it-yourselfer.--Kris Jensen-Van Heste |
|
Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture
Sales rank: 2387
3/4-inch pony pipe clamp fixture
Mounts on any 3/4-inch pipe; features crank-type handle and 1-3/4-inch square clamp faces
Hardened steel construction with baked enamel fish with no holes, rivets, or notches
Includes 2-pieced pony pipe clamp
5.2 by 2 by 8.5 inches; 2.8 pounds; lifetime warranty
The best ideas are often the simplest, which explains why Jorgenson is well known among woodworkers as the maker of some of the best clamps available, and their 3/4-inch steel bar clamp is no exception. No shop can have too many of these. They offer a basic, reliable design--featuring a crank handle, no holes, no rivets, and no notches--that leaves little room for improvement. These clamps are great for a huge variety of jobs, can be used on any length of pipe your task requires, and can be relied on to keep their grip without loosening up or slipping. Removing the clamps when the job is done is quick and easy every time. Sure, some may say that a clamp is a clamp, and to some extent that's true. But with so many brands on the market, there's a reason it's so hard to find a shop that's not full of Jorgenson clamps. If you're looking for reliable clamps at a price that allows you to buy as many as you need, Jorgensen clamps are tough to beat. --Brian Trinen |
|
Quick-Grip 58100 Spring Clamps
Sales rank: 1591
1" max. jaw opening
Constructed from high-tech resin material
Strong, lightweight and rust resistant
Soft durable pads to protect fine finishes
Quick-Grip&tmreg., 1" High Tech Resin Material Spring Clamp, Lightweight, Non-Slip Handles, Durable Soft Pads, Contoured Jaw. |
|
All in One Clamp U99 99" Ultra All In One Clamp
Sales rank: 3546
T-track accepts a variety of accessories stops, router plates, Saw plates
Router, saw plates and stop blocks fit all of the clamps
T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps
Jaws holes accept accessories:tall jaws wide jaws story sticks
Wide aluminum jaws protect soft surfaces
The Ultra Clamp is exactly that, an Ultra Clamp. An extra wide, long rigid straight edge. One solid piece of aluminum. With the same edge profile as the Single Series and the Twin Series, the Ultra accepts all of our accessories. It can be quite difficult to manage sheet goods at times. With the use of a 99" Ultra Clamp, an accessory Wide Jaw and Story Stick length-cuts are made easily without using your table saw.The E. Emerson Tool Company U99.5 99-1/2-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. Its 8-foot length accommodates standard sheeting, helping make this the most durable, most robust clamp you can buy. |
|
|
|