Browse by Catagory:
|
Dremel 761-03 7,000/14,000 RPM Cordless Pet Nail Grooming Rotary Tool
Sales rank: 1
Cordless pet nail grooming kit; two speeds of 7,000 and 14,000 rpm
Quick and easy way to trim pet's nails with rotary action
Lightweight plastic casing (requires 4 AA batteries, not included)
Includes 5 grinding drums, wrench for changing
1 pound; 2-year warranty
The rotary action of this tool comfortably, and safely, trims your pets nails. 6,000/12,000 RPM, 6 volts of power. Two speeds for light duty precision jobs. Operates on 4 AA batteries (not included). Includes Dremel unit, one 1/4 in. sanding drum, and four 1/4 in. coarse (60-grit) sanding sleevesIt's a rare human who actually enjoys clipping a dog's nails; and rarer still, the dog who enjoys it. Enter Dremel's cordless groomer, a quiet, battery-powered rotary tool that gently grinds down your pet's nails without cutting. We happen to know a particular hound named Sophie who's endured more than her share of cracked nails and bleeding nail beds, the result of the standard guillotine-type nail trimmers. Though she was a bit wary of the Dremel, she sniffed at it and decided it was harmless. Then we set it on the floor and turned it on. Sophie seemed concerned for a minute, but then lost interest. We let her get used to the sound of the Dremel for a few minutes, then got down to business. We expected her to cringe and pull away when we took paw in hand, for what usually follows is not pleasant for her. She submitted reluctantly at first to the Dremel, probably expecting the worst, but once we distracted her with a piece of rawhide, she forgot about the nail hubbub and let us carry on. The whole thing was quick and painless, which made a change for Sophie, and was actually kind of soothing for the humans, which definitely made a change for us. We followed the advice in the manual and alternated between two paws at a time, not keeping the abrasive on any nail for more than a couple of seconds, and we made sure each nail was cool before grinding it a second time. If we had a criticism, it would be to wish only that Dremel would include the ½-inch drum for larger dogs like Sophie as well as the smaller one. Other than that, it's a tail-wagger. --Kris Jensen-Van Heste |
|
Dremel 750-02 Minimite 13,000 RPM 2 Speed 4.8-Volt Cordless Rotary Tool
Sales rank: 4
Cordless small rotary tool; compatible with Dremel bit accessories; 1/8-inch collet
Small rotary tool ideal for delicate tasks and finer work; 2 speeds (5,000 and 10,000 rpm)
Lightweight plastic housing
Includes rotary tool, sanding drum, small felt wheel, fine sanding band, carbide stone
8 inches long; 2 pounds; 2-year warranty
Designed for drilling, sanding, shaping, detailing and other light-duty jobs, this compact, go-anywhere, use-anytime tool comes in extremely handy in and around the house. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank. We started counting all the uses for this little dynamo, but we stopped at 967. We like it for delicate tasks and finer work because it isn't as powerful as its big brothers, so it's easier to control. It's light, extremely maneuverable, the switch is exactly where you want it and heck, it's just plain fun to use. It's perfect for jewelry, electronics, tiny woodworking crafts like dollhouse furniture and other intricate hobbies. It uses Dremel's wide array of bits, so there's virtually no limit to what you can do with this. Sure, there are store brands on the market for less, but Dremel is king when it comes to rotary tools, and we think they outdid themselves with this one.--Kris Jensen-Van Heste |
|
Dremel MultiPro Cordless 7700-02 20,000 RPM Two-Speed 7.2V Rotary Tool System w/50 Accessories
Sales rank: 17
Cordless rotary tool with 50 accessories; 7.2 volts; two speeds (5,000 and 10,000 rpm)
Ball-bearing shaft for smooth, low-vibration operation; bit changes with no wrench
Lightweight, durable plastic housing
Includes rotary tool, 50 accessories, 3-hour charger, case
Lightweight 9 ounces; 2-year warranty
Ready to go on a minute's notice, this two-speed cordless tool and the 50 included bits are perfect for a wide variety of do-it-yourself jobs inside or out. Capable of doing almost anything the standard MultiPro does - except plug into an electrical outlet or accept attachments - you'll want to keep it charged up and handy at all times. Built for the do-it-yourselfer, Dremel's cordless MultiPro kit delivers the versatility you expect from a Dremel--with the added advantage of being cordless. Lightweight at only 9 ounces, this compact unit maneuvers comfortably in tight spaces. What will you use it for? Remove old grout in your bathtub, polish your flatware, remove a broken tile, etch glass, hang miniblinds, cut out a pet door, install a new car stereo, sand off a spot of hard-to-reach rust, clean your boat's outboard engine parts, refinish ornate woodwork, install a mortise lock, and much, much more. The kit comes with 50 bits, including a high-speed cutter, a bristle brush, a cutoff wheel, sanding discs, a felt polishing wheel, a grinding wheel, and more--all the tools you need to tackle projects around the home. The tool's ball-bearing shaft affords minimal vibration. The shaft-lock button and unique knurled collet nut make changing bits easy, too, with no wrench required. A three-hour battery charger and a carrying case are included. --Jon Groebner |
|
Dremel 8000-02 10.8V 120V Lithium Ion Cordless Rotary Tool
Sales rank: 55
Lithium-ion battery holds charge while in storage for two years so light is always ready when you need it
Includes 40 genuine Dremel accessories
Variable speed from 5,000 to 35,000 rpm to match the proper speed required
High capacity 10.8V Lithium-ion battery for longer run times
Comfort grip housing for easier handling and better tool control
Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got a battery fuel gauge that tells you how much life is left before a recharge, so you won't be caught without your Dremel, and if you choose to keep it on its charger, you won't cause memory and shorten the charge capacity. It's small, it's light, it's comfortable and maneuverable; it's everything the corded models are, but without the cord. We love it.--Kris Jensen-Van HesteHigher speeds 5,000 35,000 rpm, same as Dremel corded models. High capacity 10.8V Lithium Ion battery pack for longer run times. Battery fuel gauge lets you know when its time to recharge. Variable speed to handle a greater range of applicat |
|
Dremel 290-01 1.15 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template
Sales rank: 151
5-position calibrated stroke adjustment dial regulates engraving depth
Letter/Number template included
Includes replaceable carbide steel engraving point
Engraves on metal, glass, wood, plastic, and ceramic
Electric Engraver With Dial Stroke Adjustment Ideal For Decorative Engraving Or Adding Security By Personalizing Your Valuables 7,200 SPM, 115V Motor Engraves On Metal, Plastic, Glass, Ceramics, Wood & Even Leather Corded |
|
Dremel 300-N/55 300 Series 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 55 Accessories
Sales rank: 269
New, dynamic design for additional comfort and control
Variable speed from 5,000 to 35,000 rpm
Lightweight design for comfort during prolonged use. Comfort grip housing for easier handling and better tool control.
Dove-tail feature for Dremel-exclusive attachments
Click-and-set on/off switch allows precise speed selection
mfr: DREMEL.DIV ROBERT BOSCH 300-N/55 300 SERIES VARIABLE SPEED TOOL KIT Accessories variable speed rotary tool. 106 engraving cutter, 150 drill bit, 191 high speed cutter, 401 mandrel, 402 mandrel, 403 brush wheel, 407 coarse 1/2" sanding drum, 408 coarse 1/2" sanding drum, (3), medium sanding dic (12), small felt wheel (5), dressing stone , cut off wheel (4). 421 Small polishing compound, 422 felt buff cone, 425 emery wheel, 426 1-1/4" fiberglass cut off wheel (2), 428 Carbon steel brush, 429 large felt wheel, 430 coarse 1/4" sanding drum, 431 coarse 1/4" sanding band (3), 432 fine sanding band, 438 fine 1/4" sanding band (3)438 fine 1/4" sanding band (3)481, 3/32" collet, 511 medium buffing wheel, 7134 diamond point cutter,83332 silicon oxide grinding stone, 85442 silicon oxide grinding stone, 932 aluminum oxided grinding stone. Package Shipping Size 8.00 x 12.00 x 14.00 (not product dimensions) |
|
Dremel 3956-02 MultiPro Super 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 77 Accessories
Sales rank: 184
Rotary tool with 77-piece accessory kit and case
Corded tool, variable speeds from 5,000 to 35,000 rpm; quick-change collet
Easy to grip, rugged plastic housing and durable plastic case
Includes rotary tool, 75 bits, two clamps, and 36-inch long flexible shaft accessory
10 pounds; 5-year warranty
While there are a number of rotary tools on the market made by a host of different manufacturers, the Dremel Moto Tool is the one they all strive to copy. Dremel's MultiPro variable-speed model is great for a huge range of projects, from home improvement tasks to hobbies and crafting. It has a continuously adjustable speed range from 5,000 to 35,000 rpm, which allows the user to effectively work with materials as soft as balsa wood and as hard as ceramics. The flexible shaft that comes with this model is great for working in tight spots many rotary tools can't touch. The kit also comes with an assortment of accessories and a handy carrying case. Others may copy it, but Dremel has been making rotary tools so long they've come close to perfecting the idea. --Brian Trinen |
|
Factory-Reconditioned RotoZip RZ20-2100-RT Premium Cut-Off Kit
Sales rank: 692
Reconditioned Skil Products have a One-year warranty through the Skil factory or an authorized service center
Variable speed control (15,000 rpm to 30,000rpm)
Integrated LED worklight
Three-jaw chuck
Includes-zipmate attachment, 3 cut-off wheels, 3 zipbits, zipbit case, wrench,soft tool bag
RotoZip RZ20-2100-RT RotoZip Factory-Reconditioned Pro Cutoff Kit with Worklight RZ20-2100. Features 5.5 Amps 15000-30000 RPM 3 jaw chuck eliminates use of collets - Industry 1st Quick easy and wrenchless bit changes New designed body Redesigned tool body has internal ribbed supports to provide added structural integrity to prevent issues of fan slippage and spindle lock failures Dust sealed switch Prevents switch failure from dust contamination and excess buildup Plastic adjustable foot Made of high strength plastic adjustability allows for a depth of cut up to 1 quick release latch provides for easy positioning and removal Quick release detachable handle A strong and robust handle that is easy to remove and replace depending on the user's preference Soft grip body for all-day comfort Enhances the feel of the tool's body and provides hand comfort when using the tool for long periods of time Variable speed control Provides precise control of cutting speed when cutting a variety of materials Metal bezel Provides added structural support for the spindle lock button Integrated LED Worklight Illuminates the rotating bit provides improved sight of the cutting area. Includes RotoZip Pro Cutoff Kit with Worklight - RZ20-2100 ZipMate ZM3 Cutting Attachment Masonry Cut-off Wheel Metal Cut-off Wheel Dry-Diamond Cut-off Wheel Circle Cutting Guide Attachment Bit Accessory Pack Soft Carry Bag. |
|
Dremel 395 MultiPro 1.15 Amp 15,000 to 35,000 RPM Variable-Speed Rotary Tool with 10 Accessories
Sales rank: 1013
1.15 amp rotary tool with 10 accessories
Variable speed (5,000-35,000 rpm); quick-change collet nut
Comfortable plastic housing
Includes rotary tool and 10 commonly used accessories
18 ounces; 6-foot cord length; 5-year warranty
Variable Speed Motor Tool.We know it sounds clichéd, but we have to say it: The Dremel's capabilities are limited only by your imagination and innovation. The MultiPro rotary tool is the handful of power behind a thousand uses, with supreme control and ergonomic comfort and, truth be told, its tremendous fun to use. Its five speed sets range from 5,000 to a router-like 35,000 rpm, and combined with a seemingly endless array of bits and attachments, you can carve, grind, polish, trim, sand, cut a wide range of material, shape, clean, remove grout, smooth, drill, rout, sculpt, sharpen, engrave, strip finishes - kind of like being a superhero with gadgets that never end. The secret ingredient is the speed. With a bit moving at 35,000 rpm, you don't need to lean into the job at all; on the contrary, we found a light touch to be the most effective, and the tool does the work for you. Control is superb, thanks to a comfortable housing and excellent balance whether you're doing detail work with a pencil-like grip or grasping the tool like a tennis racquet. It's light as a feather at just about a pound, so even working at shoulder height or above is no chore. Bit change is fast and easy; the collet locks with a button and the wrench stores on board. This set comes with 10 bits to get you started, but have a look at other accessory sets too, because once you get this Dremel in hand, it's addictive. You'll want to pick up the flex shaft and right-angle attachments for cramped quarters, add on a router-type base, and maybe even get the stand that turns the tool into a mini drill press. If you've never had a rotary tool, you absolutely can't go wrong with this one, and if you're upgrading from a single- or dual-speed model, you'll love it. --Kris Jensen-Van Heste |
|
Dremel 1100-01 Stylus 5,000 to 25,000 RPM Variable Speed 7.2-Volt Lithium-Ion Cordless Rotary Tool with Docking Station
Sales rank: 3096
Cordless rotary tool
Variable speed (5,000-25,000 rpm) for many applications; use with all Dremel accessories
Durable plastic housing and soft rubber grip
Includes rotary tool, 7.2-volt lithium battery, docking station charger
Fits easily in palm--4 inches tall, 1-3/4-inch wide; 5 inches long; 2.9 pounds; 2-year warranty
If you ever find the need to grind, cut, sharpen, polish, engrave, or to clean intricate parts, the Dremel Stylus Rotary Tool will get the job done. The Dremel 1100-01 is a unique handheld cordless rotary tool that utilizes the new lithium-ion battery technology. Once the 7.2-volt battery has been charged it can retain a charge for up to 18 months of non-use. But, I doubt this tool will be set aside for long. The variable speed tool, 5,000 - 25,000 RPM, can be used by homemakers, hobbyists and artists, to clean, sand, grind, cut, polish, drill and engrave. The soft pistol grip housing fits comfortably in the hand for outstanding balance and precision control. The docking station not only holds the Stylus when not in use but also recharges the battery to provide long-lasting performance. Some of the most commonly used quick change bits are included in a handy storage case. --C. Dwight Barnett What's in the Box
Stylus tool, docking station, one #191 high speed cutter, one #194 high speed cutter, one #106 engraving cutter, one #7144 diamond wheel point, one #84922 silicone carbide Grinding Stone, one #403 bristle brush, two #414 polishing felt wheels, two #429 polishing felt wheels, one #425 emery impregnated wheel, one #421 polishing compound, one #512 abrasive buff, one #430 sanding band, two #438 sanding bands, five #412 sanding discs, one #401 mandrel, one #402 mandrel, one 3/32-inch collet, wrench, case |
|
|
|