Browse by Catagory:
|
DELTA JT160 Shopmaster 10 Amp 6-Inch Benchtop Jointer
Sales rank: 7005
6-inch bench top joiner; table supports up to 6-foot wide stock; ball-bearing 2-knife cutterhead and cutterhead lock
10 amp, 120-volt, variable speed (6,000-11,000 rpm) motor; center-mounted fence
Cast-iron bed; steel fence
Includes saw, push blocks, wrenches, manual
30 by 13-1/2 by 18 inches; 35 pounds; 2-year warranty
Removes imperfections from the edges and faces of stock to make it straight and true. Designed for the home workshop, the new Delta variable speed jointer offers performance features and capabilities even a professional woodworker can appreciate. Variable 6,000-11,000 rpm speed ranges with handy speed selection chart that allows you to select the right speed for the application. The easily adjustable, center-mounted fence allows quick set up, even for angled jointing up to 45 degrees. A ball-bearing cutterhead with jackscrew blade adjustment provides smooth operation and easy blade changes. A built-in cutterhead lock also aides in blade changes, preventing the cutterhead from turning. The conveniently located infeed table raising and lowering knob and an easy-to-read scale make adjustments easy.Small shop? Limited budget? That doesn't mean you have to give up on owning a jointer. This Shopmaster model is perfect for either situation but still packs features for precision woodworking. Variable speed offers 6,000 to 11,000 rpm, adjustable at the touch of a dial; infeed and outfeed tables adjust smoothly and easily. Though the 30-inch bed is shorter than stationary models, you aren't losing anything in width, because the JT160's cutting capacity is a full 6-1/8 inches. The fence, shorter and lighter, of course, than stationary models, tilts 0 to 45 degrees outward for beveling and chamfering operations. Positive stops are at 45 and 90 degrees. One sure advantage over its big brothers: the JT160 weighs just 35 pounds. Its cutterhead uses two knives rather than three, and the knives level with an easy-to-adjust jackscrew. Rubber base pads keep this little fellow where you want him, and if you want a permanent home for it, a stand is available. --Kris Jensen-Van Heste |
|
DELTA 37-275X X5 Professional 6-Inch 1 Horsepower Jointer, 120/240-Volt 1 Phase
Sales rank: 4401
6-inch professional jointer; enclosed stand; dust collector; center-mounted fence; push blocks
1-horsepower, 120/240-volt induction motor; 3-knife cutterhead; 45-degree tilts left and right
Cast-iron construction; Cutting capacity of 6 1/8-inch width by 1/8-inch depth
Includes 1 jointer
46 by 28-1/2 by 48-1/2 inches; 225 pounds; 5-year warranty
Includes X5 6" Professional Jointer - 37-275X, 1 HP, 120/240 Volt Induction Motor, Enclosed Stand, Dust Collector Connector, Center-Mounted Fence, 3-Knife Cutterhead, Cutterhead Guard, Push Blocks, Instruction Manual.Whether you're shopping for your very first jointer for your home workshop or your third for your professional shop, we think Delta's X5 is an excellent choice. Its price tag comes in under many of its competitors, but the quality is still top-notch, and Delta didn't skimp on the features, our favorite of which is the fence's ability to tilt both left and right. If you're cutting just a slight bevel, it doesn't really matter which way the fence is angled. But for bigger angles, it's tricky to keep your workpiece against the fence. Delta's solution: Tilt the fence toward the cutterhead and flip your workpiece so it fits snugly into the lesser angle. Beauty! We weren't sure we'd like a lever as opposed to a good old handwheel for infeed table height adjustments, but it's easy to operate and gave us precise adjustments. Rabbeting, tapering, edge and face jointing are all a pleasure to perform on the X5. Results were smooth and snipe-free, thanks to the three-knife cutterhead that was set perfectly right from the carton. With a 4800 rpm, you're making 14,400 cuts a minute. The X5's capacities exceeded our expectations with a max width of 6-1/8 inches and a max depth pass of 1/8 inch. The table's length is just shy of four feet, and we felt comfortable with workpieces as long as eight feet. The fence has positive stops at 45 and 90 degrees, and adjustment is quick and easy should you find them out of alignment. Assembly took about 90 minutes, and that included swabbing off the generous grease Delta applied for shipping. This machine's no lightweight at 225 pounds, so enlist a buddy's help when you're ready to set it up. As jointers go, this one's pleasantly quiet, plenty powerful and solid as a rock.--Kris Jensen-Van Heste |
|
DELTA JT360 Shopmaster 6-Inch 3/4-Horsepower Open Stand Jointer, 115/230-Volt 1 Phase
Sales rank: 17514
6-inch stationary jointer; 46-inch bed; center-mounted 4-7/8-inch fence tilts to 45 degrees
Heavy-duty 3/4-horsepower motor; fully adjustable infeed and outfeed tables
Cast-iron bed; heavy gauge steel legs
Includes jointer, fence, removable lock start,
39 by 46 by 28 inches; table 33-3/8 inches from floor; 2-year warranty
Cast-iron wedge bed for solid support with fully adjustable infeed and outfeed tables that operate on gibbed dovetailed ways to compensate for wear. Motor transitions quickly between fixed base (included), plunge base (included), and traditional spiral down bases (690 series)The first time you run a workpiece through this jointer, you'll know the satisfaction that precision brings. You'll be surfacing pieces as wide as 6-1/8 inches with a maximum pass depth of 1/8 inch over a 2-1/2-inch, three-blade cutterhead. If you've used a benchtop jointer in the past, you'll love stepping up to the JT360, with its 46-inch bed and 4-7/8-inch fence that tilts to 45 degrees--in and out--for beveling and chamfering. Positive stops are at 45 and 90 degrees. The bed is cast iron, and the infeed and outfeed tables operate smoothly on the gibbed dovetail ways. What's nice about moving up to this model is its 1/2-inch rabbeting capacity, perfect for picture frame moldings and lots of other projects. We're even impressed with the stand's solid, wide footprint and comfortable 33-inch height. --Kris Jensen-Van Heste |
|
Powermatic 54A Deluxe 6-Inch Jointer with Quick-Set Knives
Sales rank: 20833
6-inch jointer with a 66- by 7-¼-inch table surface equipped with quick-set knives
Powered by a 1-horsepower 1-ph motor
Quick-set knives offer fast, accurate and easy replacement
Heavy steel stand and cast iron center-mount fence, Assembly required
Fence has positive stops at 90 and 45 degrees
The Powermatic 1791279DXK 6 Deluxe Closed Stand Jointer with Quick Auto-Set Knives has the new Quick-Set knives that make for very quick, very accurate and very easy knives replacement. It still has the 1 HP, 1Ph motor and the center mounted cast iron fence assembly along with the very large 66 x 7 1/4 table surface. The fence has positive stops at 90° and 45° and you still get the 1/2 rabbeting capacity. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision depth of cut. The heavy steel stand contains the powerful motor with a non slip V-belt for maximum performance. The 4 dust port offers easy connection to any dust collection system.
Includes: 1 HP TEFC Motor, Set of three high-speed, heat-treated auto-set steel knives, Two push blocks, Dust collection port, Cutterhead guard, Industrial push-button switch |
|
Professional-Grade Biscuit Jointer - 1-1/4 hp - 11,000 RPM
Sales rank: 13928
The combination of power, features and price make this jointer an outstanding value
Long-life 6-Amp 1-1/4 HP 11000 RPM motor - as much power as joiners at more than twice the price
Variable cut-depth to 11/16" (18mm), adjustable cut-angle 0-90 degrees
Rugged die-cast aluminum fence; over-sized handle for sure grip
3 settings for #0, #10 #20 biscuits includes 4" carbide blade and dust collection bag
One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee. |
|
Grizzly G0452 6" Jointer
Sales rank: 15921
This 6" jointer has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base (just push the lever down, push the machine where you want it and kick the lever back up!), built-in dust chute with 4" dust collection hood, quick adjusting lever on the infeed table, fine control handwheel on the outfeed table, positive stop at 1/8" on the infeed table, large 5" x 35" cast iron fence, rack and pinion fence adjustment, and an easy access switch with a removable safety key. |
|
Palmgren 84261 12 Amp 6-1/8-Inch 1 Horsepower Benchtop Jointer with Dust Collection, 120-Volt 1 Phase
Sales rank: 19655
Adjustable cut depth on infeed table
2-blade cutterhead with HSS blades for optimal cutting efficiency
Easy to replace blades can also be re-sharpened for like-new cutting efficiency
Solid cast iron bed and fence for true cuts with minimal vibration
Dust collection system built in
|
|
Jet - JJ-6HHDX; 6-inch Long Bed Helical Head Jointer
Sales rank: 40129
Helical insert cutterhead with staggered carbide inserts for a superior finish and quieter cut
Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
4-sided carbide inserts allow for indexing and easy replacement
Dual position mountable ON/OFF switch allows for over or under table mounting
Two-way tilting fence with positive stops at 45 and 9 degrees
Includes 6" Helical Head Jointer - 708466DXK. |
|
JET 708457DXK JJ-6CSDX 6-Inch 1 Horsepower Jointer with Quick-Set Knive System, 115/230-Volt 1 Phase
Sales rank: 26389
Extra-Long cast iron table for better control and more accuracy
1/2" Rabbeting Capacity; 33-1/8-inch long fence with 45 and 90 degree stopes
Powerful 1 horsepower motor; Industrial push button controls
3 high-speed steel knives in the cutter head; Quick Set Knives provide easy changing
4-inch dust port for efficent dust and chip disposal
Includes 6" Long Bed Jointer - 708457DXK, Front & Rear Safety Guards.This is a sweet jointer to use. It is one of the most accurate jointers on the market, which is a critical attribute for a jointer. An accurate jointer means all of your components will fit together perfectly. Using a cheap jointer means the cumulative error of each component will add up, making the final product not square, with loose joints and even not fit together at all. Accuracy makes all the difference in the world for building furniture. This tool is very powerful and doesn't bog down during use, even with tropical hardwoods. It has an extra long bed and all the control knobs and levers are well placed. This jointer is a very high quality tool and will go the distance with you, building doors, table tops, and other furniture pieces. -- Gabriel Shantara Ford |
|
Jet - JJ-8HH; 8-inch Helical Head Jointer
Sales rank: 51519
Helical insert cutterhead with staggered carbide inserts for a superior finish and quieter cut
Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal
Includes 8" Helical Head Jointer Kit - 708468K. |
|
|
|