Browse by Catagory:
|
Delta 14-651 Professional 1/2 Horsepower Bench Mortising Machine
Sales rank: 681
1/2-horsepower bench mortising machine; head column swings 180 degrees
For professional user; multi-position hand lever; rack-and-pinion system raises and lowers head
Cast iron base for stability; gas-filled head stabilizer
Includes 1/4, 5/16, 3/8, and 1/2-inch chisel and bit sets; tool and chisel tray
22.4 by 18.6 by 16.4 inches; 77 pounds; 2-year warranty
Square holes? No problem. Delta's industrial mortiser offers precision with a 1/2-horsepower motor behind it. A rack-and-pinion system raises and lowers the head, and the mortising head column swings 180 degrees for off-table work. Clearly a step up from Delta's MM300 Shopmaster mortising machine, this one's made with the professional user in mind and includes an adjustable dovetail way on the mortising head, a tool and chisel tray, a gas-filled head stabilizer and multiposition feed lever. There's also a generous 16-3/4-by-13-1/2-inch cast-iron base and 2-15/16-inch tall two-piece fence totaling 13-5/8 inches in length. Bit and chisel changing is easy with the chuck key/hex wrench. Of course, we always want to use new tools right out of the box, and Delta's made sure you can get started right away with 1/4-, 5/16-, 3/8-, and 1/2-inch chisel and bit sets. Beats a drill and hand chisel any day! --Kris Jensen-Van HesteDelta 14-651 1/2-HP Bench Mortising MachineAfter nearly 90 years of expertise in the woodworking business, DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. The 14-651 includes 1/2HP, 120VAC 60 Hz, Single phase induction motor, 3/8" Capacity chuck and key, Four mortising chisels and bits, Tool and chisel holder, Riser block, Instruction manual.Delta 14-651 1/2-HP Bench Mortising Machine Features:; Easy and open access to drill chuck for bit changing.; Large cast-iron base with center through hole.; Adjustable rack and pinion fence and rack and pinion head raising and lowering.; Mortising head column can be turned 180; and remounted for off-table mortising.; Adjustable fence and hold down.; Adjustable dovetail way on mortising head; Height attachment adds 1 3/4" of capacity under head; Multi-position feed lever.; Adjustable depth stop.; Chuck key/hex wrench for bit and chisel changing.Delta 14-651 1/2-HP Bench Mortising Machine Specifications:; Motor: 1/2 HP, 120V, 60 hz, 1 Phase induction motor 1750 RPM; Motor Control: Push button staion; magnetic starter, transformer and 3-leg overload protection (LVC).; Column Diameter: 3-3/4" (95 mm); Table Tilt: 90;, 45; Left, vertical, 45; Right; Quill Stroke: 6" (152 mm); Quill Diameter: 1-13/16 (46 mm); Speeds:; Table Size: 16-1/4" x 13-1/2" (413 x 343 mm); Spindle & Chuck Taper: N/A; Chuck to Table Capacity: N/A; Chuck to Base Capacity: N/A; Table Insert: N/A; Key Chuck Capacity:; Height: 30" (762 mm); Length: 16-1/4" (413 mm); Width: 13-1/2" (343 mm); Weight: 55 lbs (25 kg) |
|
DELTA DP300L 12-Inch TwinLaser Crosshair Drill Press
Sales rank: 1578
Fully adjustable Twin Laser pod projects bright red crosshair on workpiece at point of bit contact
Induction motor for long-lasting, smooth performance; tilting table with slots for fast clamping of work; 1/2-inch capacity chuck
Pivoting motor mount maintains correct belt tension and facilitates speed changes; 3-spoke pilot wheel for operator convenience
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling.
2-year warranty
We were taken totally by surprise when we first saw Delta's new DP300L, because it's got the features of the big boys but the footprint and the price tag of your basic benchtop drill press. It starts out simply enough, with a six-inch distance between chuck center and column, letting you drill the center of a 12-inch board. The quill travel is a decent 2-3/8 inches, plenty for any drilling or sanding job. There's a wide range of spindle speeds to use for whatever material you're drilling, be it wood, metal or plastic, from 620 rpm all the way up to 3,100 rpm, all accessed by slipping the belt onto the appropriate set of pulleys under the top cover. The table is a reasonable 8-1/2 by 9-7/8 inches, and it tilts easy for angled drilling. But what we like most about the table is the accommodation for a C-clamp along the edge, something most drills in this class have overlooked. In addition to the table, there's an auxiliary table mounted to the column that holds an array of bits and other supplies, quite a nice feature on a drill this size. The table travels up and down the column via a very precise rack-and-pinion system like the floor-stand drills, and the locking mechanism is solid. Lighting's always been a bit of a problem on drill presses we've used, but this one's got an integrated gooseneck lamp that moves and tilts and shines light exactly where you want it. But that's not the only light on this drill press: It's got two lasers that project a bright red crosshair on the work surface showing exactly where the bit will contact the material. It's powered by a 9-volt battery (not included, so pick one up beforehand) and has a rocker-style power switch on what Delta calls the pod. Calibration is a relatively simple process, and the results are outstanding. Rather than running the bit down to the workpiece for an approximation of the contact point, you just turn on the beams and pinpoint where the bit will cut. We think the lasers will be particularly useful when drilling into cylinders like PVC pipe or dowels and pilot holes in intricate scroll-saw patterns. It's a nice, sturdy press that really doesn't need to be bolted down to your workbench but can be if you prefer. We're really pleased with the innovations on this press and glad to see Delta maintained quality while adding the bells and whistles. Bravo!--Kris Jensen-Van HesteDelta, Model DP300l, 12" Laser Crosshairs, Bench Drill Press With A 1/3HP, 120V Motor, Tilting Table, Table Raising Mechanism, 0 To 1/2" Capacity Chuck & Key, Belt & Pulleys, Light, Tray & Instruction Manual, Fully Adjustable Twin Laser Pod That Projects A Bright Red Crosshair On The Work At The Point Of Bit Contact, Induction Motor For Long-Lasting, Smooth Performance, Pivoting Motor Mount Maintains Correct Belt Tension & Facilitates Speed Changes, Adjustable-Position, Locking Depth Stop For Accurate Depth Measurement & Repetitive Drilling,Tilting Table With Slots For Fast Clamping Of Work. |
|
Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
Sales rank: 11014
3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation
Some assembly required
Includes mortiser, 3/4-inch chisel bushing, chuck extension adaptor, chuck key, and handle
16-5/16 by 13/3-4-inch base; 93 pounds; 1-year warranty
Includes 701 3/4 HP Bench Top Deluxe Mortiser - 1791310, Chisel & Tool Holder w/ Sharpening Stone, 1/2" Drill Chuck, 4" Chuck Key, Removable Safety Switch Key. |
|
Porter-Cable 513 1-1/2 Horsepower Lock Mortiser
Sales rank: 10535
Lock mortiser with a heavy-duty 1-1/2 horsepower (peak) motor
Mounts to the door in seconds and centers automatically
Equipped with an adjustable height rod for repetitive mortise cuts
Includes motor, height rod assembly, Allen wrench, 3/4 and 1-inch bits, manual
Weighs 37 pounds when shipped; 1-year limited warranty
Features: 10 Amps, AC only * 1 1/2 Peak HP, 23,000 RPM * Quick, accurate cutting of mortises for box locks * Cuts mortises up to 7 long, 1 1/4 wide, 4 3/4 deep * Automatically centers cutter on door edge * Mounts to door in seconds * Adjustable height rod for repetitive mortise cuts * Standard Equipment: Mortising machine w/ 1 1/2 Peak HP motor #690, height rod assembly (4 each #804960 rods, 1 each #800203 stop, & 1 each #800204 nut), wrench #692677, 3/4 bit #43703, 1 bit #43704, allen wrench #48245, & operating manualThe Porter-Cable lock mortiser has a heavy-duty 1-1/2 horsepower (peak) motor for quick, accurate, powerful cutting action. It mounts to a door in seconds and centers automatically for immediate and precise performance. It powers through doors made of harder woods, and fine-tunes accordingly for more delicate materials. Attach it, set it, and turn it on. Perfect mortise cuts for box locks will follow. The 513 is equipped with an adjustable height rod for repetitive mortise cuts -- which it creates up to 7 inches long, 1-1/4 inches wide, and 4-3/4 inches deep. This lock mortiser operates at 10 amps, AC only -- at a maximum no-load speed of 23,000 rpm. It comes complete with everything you need to get started right away, including rugged Porter-Cable motor (690), a wrench 3/4-inch bit, inch bit, Allen wrench, and operating manual. It also includes a height rod assembly with four each 804960 rods, one 800203 stop, and one 800204 nut. The 513 is covered by Porter-Cable's limited 1-year warranty. What's in the Box: Porter-Cable 1-1/2 peak horsepower motor, height rod assembly (four rods, one stop and one nut), Allen wrench, 3/4-inch bit, 1-inch bit, operating manual. |
|
Delta 17-959L 17-Inch Laser Crosshair Drill Press - 16 Speed
Sales rank: 6552
18 X 14 Woodworker's Table
Integrated Crosshair Laser Pod
4-7/8 Quill Stroke
16 Speeds
5/8 Chuck
Includes 17" Laser Drill Press - 17-959LR, 3/4 HP Induction Motor, 5/8" Chuck, Laser Pod, 12mm Allen Wrench, 5mm Allen Wrench, 4mm Allen Wrench, 3mm Allen Wrench, Drift Key. |
|
Delta 17-950L 16.5-Inch TwinLaser Crosshair Drill Press
Sales rank: 961
Drill press with fully adjustable Twin Laser pod that projects a crosshair on workpiece, indicating the point of bit contact
Quill has 5/8-inch capacity key chuck and 3-7/8-inch stroke; 12 speed options from 250 rpm to 3000 rpm; 1/2-horsepower induction motor
Solid cast iron table tilts left or right and forward
Large 18- by 14-inch woodworking friendly table includes removable insert
Measures 66 by 12-3/4 by 25-1/4 inches (Height by Width by Depth), weighs 194 pounds; 2-year warranty
Delta's marketing this drill press as one made finally for woodworkers instead of machinists, and it's welcome change. The changes in the table alone are worth trumpeting: It's 14 by 18 inches, has T-slots for a miter gauge, a removable insert and tilts 0 to 45 degrees forward - yes, forward -- and 0 to 90-degrees both left and right with detents at 0, 45 and 90-degrees. The forward-tilting table is quite a coup for woodworkers, offering so much more control and versatility, and even better, combined with the standard lateral tilt, now tricky compound drilling angles are a cinch. We love the T-slots, too, enabling the use of myriad shop-built jigs and sleds, stop blocks, fences and clamps. You'll just need 5/16-inch T-bolts to hold your jig in the slots. But the best table innovation, and the most eagerly awaited, we think, is the clampable perimeter. No more wrestling to find a spot for a C-clamp. Thank you, Delta! Of course, most of the buzz around this drill press focuses on the crosshair lasers, admittedly very cool. Delta made these easy to calibrate and simple to use, and it's kind of addictive. Just a push of a button, and the crosshairs show exactly where the bit will contact on the workpiece. We think the lasers will be particularly useful when drilling into cylinders like PVC pipe or dowels and pilot holes in intricate scroll-saw patterns. The quill travel is an outstanding 3-7/8 inches, plenty for pen turners to drill through half a blank. And the quill can be locked down to facilitate use of abrasive bits, another feature we really liked. There's a nice speed range, but you have to change speeds the old-fashioned way, by adjusting the belt on the proper set of pulleys. It's an easy task. Other honorable mentions include the integrated work lamp that fully illuminates the table, and there's even a nice depth gauge on the spoked handle. It's great to see a toolmaker respond to customers' needs like this. Hats off to Delta on this one.--Kris Jensen-Van Heste16-1/2" Drill Press, Large, 18" x 14", Woodworker-Friendly Table With T-Slots, Table Tilts 0-90 Degrees Left & Right Or 45 Degrees Forward For The Most Versitility In Drilling Angles, 4" x 4" Removable Table Insert For Large Bits Or Drum Sanding, Dual Lasers That Project A Bright Red Crosshair At The Point Of Bit Contact, Full 3-7/8" Quill Stroke For Drilling Applications, Quick-Release Quill Lock, Adjustable-Position, Locking Depth Stop For Accurate Measurement & Repeatability, Dual Pulley Design For 12 Speed Choices, 1/2HP, 120V Induction Motor, 5/8" Capacity Chuck & Key, Taper Shank Adapter, Laser Pod, Belts & Pulleys, 2 Year Warranty. |
|
Black & Decker BDDP100 3.2 Amp 10 inch Drill Press with 5 Speeds
Sales rank: 14686
3.2 Amp Motor for long lasting, smooth performance
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
1/2" Chuck Capacity for better gripping of accessories
Adjustable Work Light for better visibility
Tilting table with Rack & Pinion Height adjustment
10", 3.2A, Drill Press, 3.2A Motor For Long Lasting, Smooth Performance, Adjustable Position, Locking Depth Stop For Accurate Depth Measurement & Repetitive Drilling, 1/2" Chuck Capacity For Better Gripping Of Accessories, Adjustable Work Light For Better Visibility, Tilting Table With Rack & Pinion Height Adjustment, Specifications: Amps: 3.2A, Speeds 5 (620-3100 RPM), Quill Diameter: 1-1/2", Quill Stroke: 2-1/4", Chuck To Table Capacity 10", Chuck To Base Capacity 19", Height 30", Width Capacity 11", Depth 24", Table Size 8-1/4" X 7-1/2", Column Diameter 2-3/8", Includes: Drill Press, Chuck & Key, Belt & Pulleys, 2 Year Warranty. |
|
Kreg DB110 Foreman 3/4 HP Electric Semi-Automatic Pocket Hole Machine
Sales rank: 11058
Fast, rugged machine for repetitive drilling
Electric motor drills holes in 1-second cycle
Clamp holds material 1/2 to 1-1/2 inches thick
19" H x 13-5/8" W x 22-5/8"D (35 lbs.)
Tabletop height of 6-3/4"
Semi-Automatic, FOREMAN Pocket Hole Machine When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features an electric drill motor and an adjustable clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 hp drill motor and throws the clamping cylinder. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position.The Kreg Foreman 3/4 HP Electric Semi-Automatic Pocket Hole Machine is a heavy-duty solution for your drilling needs. It features an electric motor and adjustable clamping cylinder. The tabletop is 6-3/4 inches high, and the clamp can handle material 1/2 to 1-1/2-inches thick. The 1-second cycle time begins when you pull the level forward, activating the motor and throwing the clamping cylinder. The drill stroke is completed by pulling on the lever and then returning it back to its home position. |
|
Wilton 2550 20-Inch Floor Drill Press
Sales rank: 15149
1 1/2 HP 115 Volt Motor
Cast Iron Head
12 Spindle Speeds 150-4200 rpm
Depth Stop
Includes 5/8" Drill Chuck
Base Dimensions (LxWxH/ in.) 22-3/4 x 17-3/4 Base Work Table (in.) 22-3/4 x 17-3/4 Brand Wilton Chuck Size (in.) 5/8 Column Diameter (in.) 3-5/8 Distance Column to Spindle (in.) 10 Drilling Capacity Cast Iron (in.) 3/4 Drilling Capacity Mild Steel (in.) 5/8 Drills to Center of Circle (in) 20 Height 13 inch Important Information Capacities for continuos production user will vary based on application. Length 56.5 inch Model Number 2550 Motor 1-1/2HP, 115V, 1Ph, 1725 RPM Net Weight 321 pound Number of Spindle speeds 12 Overall Dimensions 34 x 21 x 67 Part Number 2550 Quill Diameter (in.) 2-1/4 Quill Travel (in.) 4-3/4 Range of Spindle Speeds (RPM) 150,260,300,440,490,540,1150,1550,1840,2220,2950,4200 Ship Weight 305 pound Spindle Distance to Base (in.) 43-1/2 Spindle Taper 3 MT Spindle Travel (in.) 4-3/4 Swing (in.) 20 T-Slots Number and Size (in.) 3 & 1/2 Table Size (in.) 18-1/2 x 16-1/2 Width 26 inch Work Table Weight Capacity (lbs.) 14 x 16 |
|
Palmgren 61051 AP05 1/2-Ton Manual Arbor Press
Sales rank: 19709
Study cast iron construction
Removable machined steel anvil provides accurate work support in four slot positions
Rugged steel ram is driven by machined pinion.
Punches or tools may be added to the end of the ram with the aid of a magnetic insert
Base drilled for mounting on bench or pedestal.
|
|
|
|