Browse by Catagory:
|
Grizzly G7943 12 Speed Heavy-Duty Bench-Top Drill Press
Sales rank: 9828
Approx. shipping weight: 160 lbs.
Motor: 3/4 HP, 110V
Range of speeds: 140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
Spindle taper: MT #2
Swing: 14"
All the features and dependability of an expensive industrial grade drill press - with a price tag that's astoundingly low. Includes built-in light (bulb not included). |
|
Grizzly G0540 Single Spindle Boring Machine
Sales rank: 87426
Motor: 3/4 HP, 110V, 12 Amp, single-phase, TEFC, 3450 RPM
Table size: 14 1/4" W x 8 1/4" D
Table travel, front to back: 4 1/8"
Table travel, side to side: 6"
Table travel, vertical: 2 1/8"
How many times have you wished for a simple horizontal boring machine to drill accurate holes into the edges of flat lumber for doweling, hardware alignment or basic mortising? Well, your wish has been answered with this Single Spindle Horizontal Boring Machine. 5/8" drill bit capacity. Direct drive power transfer. Approximate shipping weight of 160 lbs. |
|
OTC 7402 Universal Outside Thread Chaser
Release Date: 2007-11-14
Sales rank: 21124
Restores threads to their original condition
Replaces V-pads and dies
6 dies to achive the following threads per inch: 4, 5, 6, 7, 7 1/2, 8, 9, 10, 11, 11 1/2, 12, 14, 16, 18, 20 and 24
1 1/4in. to 5in. O.D. capacity. Easy to use. U.S.A. |
|
Grizzly G7942 5 Speed Baby Drill Press
Sales rank: 32298
Drill chuck: 1/2"
Drilling capacity: 1/2" steel
Motor: 1/3 H.P., TEFC motor, 110V
Number of speeds: 5 (620, 1100, 1720, 2340, 3100 RPM)
Swing: 8"
Perfect for the small shop, this tough little guy won't get in your way when things get cramped. Put it away on the shelf when finished. Very cute unit! |
|
Shop Fox H0626 Oscillating Drill Press
Sales rank: 49639
Drill chuck: 1/8"-5/8"
Motor: 3/4 H.P. 110V, 1725 RPM
Number of speeds: 12
Spindle travel: 3-1/4"
Swing: 13-1/4"
Just like its little brother, this 12 speed oscillating sander can be used for efficient contour sanding. With more speeds, more power and more capacity this machine becomes an effective tool for heavier use. The table is supplied with a clearance hole for use while sanding. And this clever design incorporates a dust collection port so that sanding is less messy. With a 3/4" drilling capacity in steel you'll be able to tackle most drilling job as well. Check out these specs below.The Shop Fox H0626 Oscillating Drill Press functions as a 12-speed oscillating sander that can be used for contour sanding. With 12 speeds, extra power and a high-capacity motor, this machine is ready to take on the heavy jobs. The table is supplied with a clearance hole for use while sanding, and a clever design incorporates a dust collection port so that sanding is less messy. The drill chuck ranges from 1/8 to 5/8 inches, and the 3/4 HP motor performs up to 1725 RPM and runs on 110-volt power supply. The drill has a spindle travel of 3-1/4 inches and an overall swing of 13-1/4 inches. |
|
Grizzly G7945 5 Speed Bench-Top Radial Drill Press
Sales rank: 50045
Drill chuck: 1/8"-5/8"
Motor: 1/2-HP, single-phase, 110V
Number of speeds: 5
Range of speeds: 550, 880, 1520, 2490, 3470 RPM
Spindle travel: 3-1/4"
These 5 speed Radial Drill Presses feature variable swing up to 34" and pivoting heads for drilling at just about any angle. Truly versatile! |
|
Delta 32-325 3/4 Horsepower 13 Spindle Line Boring Machine
Sales rank: 37789
Bores multiple holes simultaneously to increase productivity
Heavy Duty 3/4-hp induction motor for powerful drilling action
Fully adjustable table and fence for quick and easy set up
Big 16-by-29-3/4-inch table for ample work support
Two-year limited warranty on machines, parts, and accessories
Large, 16" X 29 3/4" table provides a full 12" of work space in front of the boring head for boring extra-large boards.Telescoping handle, featured on No.32-325, extends from 16" to 23" for increased leverage when needed; retracts when not in use.Fully-adjustable table and fence assembly features easy-to-read English and Metric scales for quick set-up and accurate boring.No.32-326 Pneumatic Line Boring Machine eliminates the need for manual operation, increasing productivity and operator comfort.Indexing pins help operator to maintain correct spindle alignment for resuming line boring operations in long workpieces.Work stops on either end of the fence allow operator to line up work from the left or right for performing parallel oring patterns.Adjustable depth stop controls the downward travel of boring head.Heavy-gage, sheet steel support structure has a sturdy steel base with holes for bench or stand mounting.Powerful 3/4HP motor delivers plenty of power and speed for multiple hole boring even in the toughest laminates.Large-capacity, 13-spindle boring head comes with a see-through spindle guard for safety. |
|
Jet JMD-18 / 350018 Milling/Drilling Machine
Sales rank: 66927
Hinged belt cover allows faster speed changing
9-1/2-by-31-3/4-inch worktable
2 hp, 1 phase, 230-volt only motor
Heavy-duty tapered roller bearins support the spindle
Stand not included
18in. milling/drilling machine has a 1-pc. cast iron column for added support, extra-large work table, positive quick-stop knob and easy-to-read internal depth gauge. Belt cover has quick-slide latch for faster belt adjustment to change spindle speeds. Heavy-duty tapered roller bearings support spindle for greater tolerance and more accurate drilling depth. 42 1/2in.L x 39 3/4in.W x 43 1/2in.H overall |
|
Grizzly G9969 Radial Drill Press
Sales rank: 74334
Drill chuck: 5/8"
Motor size: 1 H.P., Single Phase
Number of speeds: 12
Range of speeds: 200-3000 RPM
Swing: 45"
Designed by us, this drill press is very popular with both wood and metalworking shops that have bulky projects. Head swivels 360 deg and tilts 45 deg left and right. Swing is a huge 45" (you can drill in the middle of a 45" diameter round piece) and spindle can be brought close to the column with the uniquely designed swivel post. Slots in table allow you to use a variety of clamping devices. |
|
Grizzly G7944 12 Speed Heavy-Duty 14" Floor Drill Press
Sales rank: 35652
Motor: 3/4 H.P., single-phase, 110V
Number of speeds: 12
Range of speeds: 140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
Spindle travel: 3-1/4"
Swing: 14"
This heavy-duty Floor Model Drill Press is the mainstay in any shop with 12 speeds and powerful 3/4 HP motor. |
|
|
|