Browse by Catagory:
|
Delta 75152 Water Amplifying Adjustable Showerhead with H2OKINETIC Technology, Chrome
Sales rank: 132
Water and energy saving shower head
Patented motion of water will not clog up from minerals in your water - ever!
Metal ball connector for durablity
Easy Installation
Operates at 1.85 gallons per minute yet feels like more water
|
|
DELTA 50-760 1.5 Horsepower 1,200 CFM Vertical Bag Dust Collector, 120/240-Volt 1 Phase
Sales rank: 647
Standard 1-micron filtration bags for optimal air cleaning
Snap-in bag rings eliminate need for cam-over-lock style clamps; powerful TEFC induction motor; (2) 4-inch dust ports, or (1) 5-inch main port
Sturdy steel base with four easy-gliding wheels
6 mil plastic chip collection bags for optimal durability
2-year warranty
1.5 HP single-stage dust collector has powerful TEFC induction motor and blower for long-lasting, smooth performance.
Features sturdy steel base with four easy-glide wheels for moving from machine to machine or for storing out of the way. Uses standard 1 micron filtration bags. Snap-in bag rings eliminate need for cam-over-lock style clamps. 6 mil plastic chip collection bags. Motor housing can be mounted with dust ports facing up or down.
With two 4" dust ports. Comes with four swivel caster assemblies, cord and plug, and instruction manual.A small footprint and big power - that's what you get with this Delta dust collector. It takes up so little room because its volume is vertical, not horizontal. Standing 83 inches tall, it takes up just about 4-1/2 square feet of floorspace, but its 3,450 rpm motor moves a maximum of 1,200 cubic feet of air per minute. The small footprint is valuable in the home workshop, where space is often at a premium, but it's beneficial, too, because this machine is on rugged casters, and its size lets you move it wherever you need it in your shop, from the jointer to the planer to the saw to the sander. If you're fortunate enough to have a ducting system and blast gates in place, this machine stows easily in a corner and does all the work from there. It's rated at 88 decibels, but it's quite a bit more tolerable than a shop vacuum, we think. Assembly is minimal; expect about 45 minutes and a little frustration if you're going it alone. The only tricky part, as with any dust collector assembly, is mounting the plastic collection bag. There are two different rings to choose from; use what works for you. The upper bag filters down to 1 micron, which is a millionth of a meter, keeping the air and your lungs clear of dangerous contaminants. The collection bag is made of tough, 6-mil clear plastic, and we've really come around on the plastic bags from not liking them to, well, thinking they're a good idea. Exhaust goes through the filter bag, not the collection bag, so no air (or debris) escapes, and you can easily see when the bag needs emptying without waiting for performance to falter. There's a nice option for installation, too, that we haven't seen on other models: You can install the blower housing with the outlet ports facing up or down, depending on your ducting system and shop needs. And yes, you can use both ports at once - it's that powerful. We think this is a great investment for the home workshop or small professional shop, and your lungs are definitely worth it.--Kris Jensen-Van Heste |
|
Delta 36-136 Universal Miter Saw Stand
Sales rank: 761
Fully adjustable infeed and outfeed rollers.
Folds up for easy storage.
3 position, pneumatic assisted raising and lowering for the ultimate in flexibility and ease of use.
Durable tubular steel construction allows for a 200 pound max weight rating
Ideal for miter saws, table saws, and many other bench top products.
Fully adjustable infeed and outfeed rollers. Folds up for easy storage. 3 position, pneumatic assisted raising and lowering for the ultimate in flexibility and ease of use. Durable tubular steel construction allows for a 200 pound max weight rating. Ideal for miter saws, table saws, and many other bench top products. |
|
Delta 22-549 Replacement Knives for Delta 13-Inch Planer
Sales rank: 614
Double-edged, reversible, two cutting edges per knife
High-speed steel for razor-sharp edge
Fits only Delta model 22-580 13" thickness planer
Two year warranty against manufacturing defects
2 Pack, Replacement, High Speed Steel, Planer Knife, For Delta #22-580, True Value # 552-331. |
|
DELTA SA180 Shopmaster 1-Inch/8-Inch 1/3 Horsepower Belt/Disc Sander
Sales rank: 4879
1/3-horsepower 1-inch belt/8-inch disc sander
3,000 surface feet per minute for aggressive stock removal; built-in dust port
Cast-iron work tables
Includes belt/disc sander, miter gauge, belt, disc, manual
25-1/4 by 15 by 19 inches; 62 pounds; 2-year limited warranty
1" Belt, 8" Disc Sander, 3000 SFPM Belt Speed Is Ideal For Metal Grinding, Deburring & Sharpening, As Well As Sanding & Buffing Jobs, 8" Diameter Disc Operates At 1725 RPM For Finishing Hard & Soft Woods, Plastics, Composites & More, Tilting Cast-Iron Tables On Belt & Disc Units Are Slotted For Miter Gage Use, Factory-Set Belt Tensioning & One-Knob Belt Tracking For Accurate Operation, Built-In, 1-1/2" I.D. Dust Spout For Adaptation To A Dust Collection System Or Shop Vacuum, Includes: Miter Gage, 1" x 42" 100 Grit Belt, 8" Diameter, 60 Grit Disc & Instruction Manual, 2 Year Warranty.If your workshop doesn't have one of these combination sanders, it's probably because you don't think you need it. But put it to work once and you'll realize you can't get along without it. Its uses are endless. You know those tight curves and angles you have to sand by hand? Not anymore, thanks to this Shopmaster sander. The automatic belt-tensioning and tracking controls are conveniently located and easy to use, and the built-in power takeoff for a flexible shaft accessory (sold separately) is a great extra touch that allows you to accomplish any number of additional tasks. Finishing curves or odd-shaped work is a cinch when you remove the belt platen, and you'll even be sanding chamfers and bevels just by tilting the sturdy aluminum tables on either sander. The disc is a fabulous 8 inches, which opens up all kinds of uses. The side panel removes in a blink to change belts. The 1-inch belt sands 3,000 surface feet per minute, and the disc travels at 1,725 rpm for aggressive stock removal, all powered by a 1/3-horsepower induction motor. A built-in dust port allows connection to your dust management system. --Kris Jensen-Van Heste |
|
Delta 22-562 12-1/2-Inch Steel Knife for 22-560 Planer (2-Pack)
Sales rank: 843
High-speed steel for a sharp edge
Double-sided for twice the cutting life
Fits Delta 22-560 12-1/2-inch Planer--indexed for perfect alignment each time
2-pack
2 Pack,12-1/2" Planer Blade, Replacement Blade For #22-560 Planer, High Speed Steel Double Edged Reversible Knives. |
|
DELTA 14-651 Professional 1/2 Horsepower Bench Mortising Machine
Sales rank: 2207
1/2-horsepower bench mortising machine; head column swings 180 degrees
For professional user; multi-position hand lever; rack-and-pinion system raises and lowers head
Cast iron base for stability; gas-filled head stabilizer
Includes 1/4, 5/16, 3/8, and 1/2-inch chisel and bit sets; tool and chisel tray
22.4 by 18.6 by 16.4 inches; 77 pounds; 2-year warranty
Delta 14-651 1/2-HP Bench Mortising MachineAfter nearly 90 years of expertise in the woodworking business, DELTA Machinery has become one of the most revered brands in woodworking tools today. DELTA Machinery focuses on innovations to help the woodworker create masterpieces easier and with more precision. The 14-651 includes 1/2HP, 120VAC 60 Hz, Single phase induction motor, 3/8" Capacity chuck and key, Four mortising chisels and bits, Tool and chisel holder, Riser block, Instruction manual.Delta 14-651 1/2-HP Bench Mortising Machine Features:; Easy and open access to drill chuck for bit changing.; Large cast-iron base with center through hole.; Adjustable rack and pinion fence and rack and pinion head raising and lowering.; Mortising head column can be turned 180; and remounted for off-table mortising.; Adjustable fence and hold down.; Adjustable dovetail way on mortising head; Height attachment adds 1 3/4" of capacity under head; Multi-position feed lever.; Adjustable depth stop.; Chuck key/hex wrench for bit and chisel changing.Delta 14-651 1/2-HP Bench Mortising Machine Specifications:; Motor: 1/2 HP, 120V, 60 hz, 1 Phase induction motor 1750 RPM; Motor Control: Push button staion; magnetic starter, transformer and 3-leg overload protection (LVC).; Column Diameter: 3-3/4" (95 mm); Table Tilt: 90;, 45; Left, vertical, 45; Right; Quill Stroke: 6" (152 mm); Quill Diameter: 1-13/16 (46 mm); Speeds:; Table Size: 16-1/4" x 13-1/2" (413 x 343 mm); Spindle & Chuck Taper: N/A; Chuck to Table Capacity: N/A; Chuck to Base Capacity: N/A; Table Insert: N/A; Key Chuck Capacity:; Height: 30" (762 mm); Length: 16-1/4" (413 mm); Width: 13-1/2" (343 mm); Weight: 55 lbs (25 kg)Square holes? No problem. Delta's industrial mortiser offers precision with a 1/2-horsepower motor behind it. A rack-and-pinion system raises and lowers the head, and the mortising head column swings 180 degrees for off-table work. Clearly a step up from Delta's MM300 Shopmaster mortising machine, this one's made with the professional user in mind and includes an adjustable dovetail way on the mortising head, a tool and chisel tray, a gas-filled head stabilizer and multiposition feed lever. There's also a generous 16-3/4-by-13-1/2-inch cast-iron base and 2-15/16-inch tall two-piece fence totaling 13-5/8 inches in length. Bit and chisel changing is easy with the chuck key/hex wrench. Of course, we always want to use new tools right out of the box, and Delta's made sure you can get started right away with 1/4-, 5/16-, 3/8-, and 1/2-inch chisel and bit sets. Beats a drill and hand chisel any day! --Kris Jensen-Van Heste |
|
Delta 50-446 Dust Connector for Delta Model 22-580
Sales rank: 2310
Sturdy blow-molded design
4-inch diamater connection built into the unit
Can be positioned for connection to be either on the right or left side of machine
Works only with the Delta 22-580 13-inch planer
2-year limited warranty
Includes Planer Dust Hood - 50-446. |
|
Delta 75580 In2ition 2-in-1 Handshower and Shower Head System
Sales rank: 879
Two Showers in One; operates as a hand shower, shower head or BOTH at one time
Anti-clog to remove mineral deposits; Includes 6' tangle free vacuum breaker hose
Patented interlocking hand shower/shower head system for full-body spray coverage
Installs in 5 minutes or less; wrench required
Lifetime Warranty
|
|
Delta 40-620 3 Dozen Assorted Scroll Saw Blades
Sales rank: 3297
3 dozen assorted blades for a variety of uses
Five inches long with plain ends for Delta and other scroll saws
A great starter set for new scroll saw owners, contains popular styles
|
|
|
|