Bolt Hanger by Metolius
Sales rank: 96121
The Stainless Steel Bolt Hanger from Metolius is designed for belay use, rescue and rigging work, and protection points if necessary Features: Designed for 3-8 inch bolt holes (fits 3-8 inch bolts or 1-2 inch full sleeve bolts) Clip-in point big enough to accommodate 2 carabiners Specifications: Strength: 22 kN |
|
Coeur 10 mm Bolt Hanger by Petzl
Sales rank: 205812
Hang bolts with Petzl's multi-directional, stainless steel Coeur 10 mm Bolt Hanger Features: Specifications: Hanger breaking strength: 25 kN |
|
Personal Anchor System With Element Biner by Metolius
Sales rank: 321049
You won't need to use a daisy chain for your belay changeovers anymore when you wear Metolius's Personal Anchor System (PAS) Safe, convenient, and easily adjustable, the Monster sling webbing is fitted out with the Element locking carabiner to provide you with a strong attachment without the need for slings or quickdraws at the anchor Features: Lock yourself in place with the Element locking carabiner that provides 18 kN of strength Hang safe on the 16 mm Monster Sling webbing with contasting colors on the end loop to simplify use When you're not using it, stow it all away compactly Specifications: Range: 16 mm Weight: 89 grams Strength: 18 kN |
|
50 Fusion Stainless Steel Bolt Hangers 10mm
Material: Stainless Steel
Opening: 10mm
Strength: 30kN
#
CABAL
This 10mm STAINLESS STEEL bolt hanger has a large open design for easy clipping.
The design allows for multiple carabiner capacity.
Strong and sturdy and fits up to10mm steel bolts |
|
3/4 GLV SCRW PIN ANCR SHACKLE
Size 3/4".
Load limit 3.25 tons.
Wide bow,open-throat.
Screw pin shacklet.
Slip screwdriver blade.
"FEHR BROTHERS" GALVANIZED SCREW PIN ANCHOR SHACKLE
Size 3/4".
Load limit 3.25 tons.
Wide bow,open-throat.
Screw pin shacklet.
Slip screwdriver blade.
Hand punch through pin/eye and tighten.
Made from forged steel, hot dipped, galvanized.
It meets Federal Specification RRC-271B, Class 1,Type IV. |
|
Plated Hanger by Fixe Hardware
Sales rank: 158929
The Fixe Plated Hanger has a rated strength of 22 kiloNewtons and is suited for all but the most corrosive conditions.Features: Cut from 4 millimeter stock. It will accommodate 2 carabiners. Specifications: Strength: 22 kiloNewtons. |
|
3/16 GLV SCRW PIN ANCR SHACKLE
Size 3/16"
Load limit 1/4 tons.
Wide bow,open-throat.
Screw pin shacklet.
Slip screwdriver blade.
"FEHR BROTHERS" GALVANIZED SCREW PIN ANCHOR
Size 3/16"
Load limit 1/4 tons.
Wide bow,open-throat.
Screw pin shacklet.
Slip screwdriver blade.
Hand punch through pin/eye and tighten.
Made from forged steel, hot dipped, galvanized.
It meets Federal Specification RRC-271B, Class 1,Type IV |
|
Figure 8 Climbing Ring
Forged aluminum ring for descending or belaying. 8000 LB test. 5 1/4" x 3" |
|
Anchor Plate by CMC Rescue
Keep the carabiners holding your rescue system components from jamming together with the CMC Anchor Plate It makes hardware easier to see, so safety checks are faster and more accurate Features: For anchor systems, it makes an excellent collection point These are marked with a CE mark but they are not CE certified Specifications: Hole diameter: Small to 7-8 inch, Large to 2 inches |
|