Re: XRandR EDID missed with Cedar on LVDS
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Am 02.11.11, 17:41 -0400 schrieb Alex Deucher:
On Wed, Nov 2, 2011 at 5:03 PM, Kai-Uwe Behrmann <ku.b@xxxxxx> wrote:While testing a ATI Cedar equiped laptop I could not get the EDID for the interal LVDS in user space. I tried xrandr and xcmddc with no results. But the /var/log/Xorg.0.log showed that EDID was detected and hwinfo gives the monitor manufacturer. Still user space applications needs the complete data block to configure the monitor.Can you post your xorg log and dmesg output? There are several possibilities:
They are here: https://bugs.freedesktop.org/show_bug.cgi?id=32343#c7
1. Your panel does not provide an EDID. The driver is still able to determine the native mode timings from tables in the vbios.
This LVDS' EDID looks like being detected by frglx. It might be broken.On the other side xcmddc shows an external monitors EDID but does not listen the this LVDS one. xcmddc uses i2c communication. Not sure what frglx does to see the discussed LVDS EDID.
2. Your EDID has a bad checksum/etc. and the kernel drm EDID validator rejects it: https://bugs.freedesktop.org/show_bug.cgi?id=31943 You can try the patch on that bug and see if it helps.
kind regards Kai-Uwe _______________________________________________ xorg@xxxxxxxxxxxxxxxxxxxxx: X.Org support Archives: http://lists.freedesktop.org/archives/xorg Info: http://lists.freedesktop.org/mailman/listinfo/xorg Your subscription address: list-xorg@xxxxxxxxxxx
[X Forum] [Nouveau Driver] [Devices] [XFree86] [XFree86 Newbie] [Site Home] [IETF Annouce] [Security] [Fontconfig] [Bugtraq] [Photo] [Yosemite] [MIPS Linux] [ARM Linux] [Linux Security] [Video for Linux] [Linux RAID] [Linux Resources]