| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
Thanks for the info.Adjusting the mode name results in exactly the same effect - ie no mode of this name.
Adjusting the Virtual to 1280 1024 results in a different log message ofhaving a larger virtual but it still has the same effect - it chooses 640x480 and complains about other mode names (eg "1024x768") which it has previously detected but indicates no mode of this name.
Any other ideas? (I'll resend the config and log files if requested) johnh... On Wed, 15 Mar 2006, Marc Aurele La France wrote:
Date: Wed, 15 Mar 2006 08:38:26 -0700 (MST) From: Marc Aurele La France <tsi@xxxxxxxxxxx> To: John Hayward <John.C.Hayward@xxxxxxxxxxx> Cc: xfree86@xxxxxxxxxxx Subject: Re: I810(0): Not using mode "1280x1024" (no mode of this name) On Wed, 15 Mar 2006, John Hayward wrote:Dear XFree People,I recently upgraded my machine - uses NetBSD-3.0 OS, Gateway FPD1930 Display, with I810 built-in video and XFree86 V 4.5.0. X detects various video modes from the monitor which don't seem to be rejected because of timing yet when are specified in the Display subsection of the Monitor section are discarded because it reports ...no mode of this name... I even manually set up a mode with a unique name and yet X still rejects it because of ...no mode of this name...It uses a built-in mode of 480x640 (one of the ones it detected). How do I get it to use a different mode? Below are the XF86Config and XFree86.0.log files ==== XF86Config ===[...]Section "Monitor" #DisplaySize 380 300 # mm Identifier "Monitor0" VendorName "GWY" Mode "1024x1280JCH"^^^^^^^^^^^^^^DotClock 135.0 HTimings 1280 1328 1440 1688 VTimings 1024 1025 1028 1066 EndMode ModelName "FPD1930" Option "DPMS" EndSection[...]Section "Screen" Defaultdepth 16 Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Virtual 1024 780^^^^^^^^^^^^^^^^Depth 16 Modes "1280x1024" "1024x768" "800x600" "1280x1024JCH"^^^^^^^^^^^^^^EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 32 EndSubSection EndSectionFirst, "1024x1280JCH" != "1280x1024JCH".Secondly, your Virtual specification will limit the physical modes you can end up with.Marc. +----------------------------------+-----------------------------------+ | Marc Aurele La France | work: 1-780-492-9310 | | Academic Information and | fax: 1-780-492-1729 | | Communications Technologies | email: tsi@xxxxxxxxxxx | | 352 General Services Building +-----------------------------------+ | University of Alberta | | | Edmonton, Alberta | Standard disclaimers apply | | T6G 2H1 | | | CANADA | | +----------------------------------+-----------------------------------+ XFree86 developer and VP. ATI driver and X server internals.
johnh... _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
[X Forum] [Xorg] [Devices] [XFree86] [XFree86 Newbie] [Site Home] [IETF Annouce] [Security] [Fontconfig] [Bugtraq] [Rubini] [Photo] [Yosemite] [MIPS Linux] [ARM Linux] [Linux Security] [Video for Linux] [Linux RAID] [Linux Resources]