Re: Question about XFree86 4.5.99.901 snapshot

[Tom Williams <tomdkat@xxxxxxxxxxx>]

Mark Vojkovich wrote:
>    It would appear as though -autoconfig is broken.  Can you
> do -configure instead?  It used to be able to generate a working
> config file.
>
> 			Mark.
>   
Ok, that worked just fine, using the original, unpatched XFree86 code.
The attached XF86Config.new was generated.

Peace...

Tom


Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "pex5"
	Load  "record"
	Load  "xie"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection
Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
EndSection

Section "Monitor"
	#DisplaySize	  310   230	# mm
	Identifier   "Monitor0"
	VendorName   "DEL"
	ModelName    "DELL E771a"
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	BoardName   "NV11DDR [GeForce2 MX 100 DDR/200 DDR]"
	BusID       "PCI:0:16:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection