[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Problem Upgrading XFree86 version 4.2 to 4.5



 

Running

1.      Version XFree86 4.5.0

2.      RedHat 8 kernel 2.4.18-14

3.      S3 SAVAGE Video card

 

Hi There,

 

I’m getting a problem after attempting to upgrade XFree86 from version 4.2.0 to 4.5.0. I used the Xinstall.sh script documented on the Xfree86.org website. However, when attempting to configure my system using XFree86 –autoconfig, I get an error as seen in XFree86log.txt.

 

Please help me if you can. The reason I’m upgrading XFree86 is because I was facing slow response from a Crystallography program O and was advised to upgrade XFree86.

 

Cheers,

Alvin Ng

Institute of Molecular and Cell Biology

61 Biopolis Drive

Singapore 138673

DID : 65869799 Fax 67791117

GCATTGGTTATAAAC AACGGG

 



DISCLAIMER:
This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person as it may be an offence under the Official Secrets Act. Thank you.
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/flamingo.imcb.a-star.edu.sg:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
_XSERVTransSocketCreateListener: failed to bind listener
_XSERVTransSocketINETCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: failed to create listener for inet

XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.4.7-10custom i686 [ELF] 
Current Operating System: Linux flamingo.imcb.a-star.edu.sg 2.4.18-14bigmem #1 SMP Wed Sep 4 11:58:10 EDT 2002 i686
Build Date: 16 March 2005
Changelog Date: 16 March 2005
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Command line: XFree86 -autoconfig
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (EE) error, (WW) warning,
	(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 19 16:58:10 2005
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.3
	XFree86 Video Driver: 0.8
	XFree86 XInput driver : 0.5
	XFree86 Server Extension : 0.3
	XFree86 Font Renderer : 0.5
(II) Loader running on linux
(--) using VT number 9

(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1014,0302 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 5333,8a22 card 1014,01c5 rev 06 class 03,00,00 hdr 00
(II) PCI: 00:02:0: chip 1014,010f card 1014,0113 rev 00 class 06,80,00 hdr 00
(II) PCI: 00:03:0: chip 8086,1229 card 1014,024d rev 08 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 1014,0246 card 1014,0247 rev 00 class 08,08,00 hdr 00
(II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 50 class 06,01,00 hdr 80
(II) PCI: 00:0f:1: chip 1166,0211 card 0000,0000 rev 00 class 01,01,8a hdr 80
(II) PCI: 00:0f:2: chip 1166,0220 card 1166,0220 rev 04 class 0c,03,10 hdr 80
(II) PCI: 01:00:0: chip 1014,0302 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 01:01:0: chip 1014,01bd card 1014,0208 rev 00 class 01,04,00 hdr 00
(II) PCI: 0a:00:0: chip 1014,0302 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:15:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus 1: bridge is at (1:0:0), (1,1,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 10: bridge is at (10:0:0), (10,10,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 10 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 10 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 10 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:1:0) S3 Inc. Savage 4 rev 6, Mem @ 0xfbf80000/19, 0xf0000000/27
(II) AutoConfig: Primary PCI is 0:1:0
(II) AutoConfig: Running "/usr/X11R6/bin/getconfig -X 40500000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x5333 -d 0x8a22 -r 0x06 -s 0x1014 -b 0x01c5 -c 0x0300".
(II) AutoConfig: New driver is "savage".
(==) Using default built-in configuration (54 lines)
(==) --- Start of built-in configuration ---
	Section "Module"
		Identifier	"Builtin Default Modules"
		Load	"extmod"
		Load	"dbe"
		Load	"glx"
		Load	"freetype"
	EndSection
	Section "Monitor"
		Identifier	"Builtin Default Monitor"
		Option	"TargetRefresh"	"75.0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default savage Device 0"
		Driver	"savage"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default savage Screen 0"
		Device	"Builtin Default savage Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vga Device 0"
		Driver	"vga"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vga Screen 0"
		Device	"Builtin Default vga Device 0"
		Monitor	"Builtin Default Monitor"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default savage Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default vga Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) Keyboard: CustomKeycode disabled.
(WW) The core pointer device wasn't specified explicitly in the layout.
	Using the default mouse configuration.
(WW) The core keyboard device wasn't specified explicitly in the layout.
	Using the default keyboard configuration.
(==) ServerLayout "Builtin Default Layout"
(==) |-->Screen "Builtin Default savage Screen 0" (0) (0, 0)
(**) |  |-->Device "Builtin Default savage Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default fbdev Screen 0" (1) (0, 0)
(**) |  |-->Device "Builtin Default fbdev Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default vesa Screen 0" (2) (0, 0)
(**) |  |-->Device "Builtin Default vesa Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Screen "Builtin Default vga Screen 0" (3) (0, 0)
(**) |  |-->Device "Builtin Default vga Device 0"
(**) |  |-->Monitor "Builtin Default Monitor" (0)
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Checking for unused ServerFlags options:
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[1] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[2] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[3] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[4] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[5] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[6] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[7] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[8] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[9] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[1] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[2] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[3] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[4] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[5] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[6] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[7] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[8] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[9] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[6] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[7] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[8] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[9] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[10] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[11] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[15] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[16] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.4.99.903, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
	compiled for 4.5.0, module version = 2.1.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.1.27
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 4.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.5
(II) SAVAGE: driver (version 1.1.27) for S3 Savage chipsets: Savage4,
	Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
	Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
	ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
	SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
	SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
	SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
	ProSavage DDR-K
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset Savage4 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[6] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[7] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[8] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[9] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[10] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[11] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[15] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[16] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.0.2
	ABI class: XFree86 Video Driver, version 0.8
(EE) open /dev/fb0: No such device
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[6] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[7] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[8] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[9] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[10] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[11] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[18] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[19] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
	[20] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[21] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) SAVAGE(0): Creating default Display subsection in Screen section
	"Builtin Default savage Screen 0" for depth/fbbpp 16/16
(==) SAVAGE(0): Depth 16, (==) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(II) SAVAGE(0): VESA VBE Capabilities: 0x00000001
(--) SAVAGE(0): Chip: id 8a22, "Savage4"
(--) SAVAGE(0): Engine: "Savage4"
(--) SAVAGE(0): mapping MMIO @ 0xfbf80000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram:  8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.8
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.8
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 125.284 MHz
(II) SAVAGE(0): Builtin Default Monitor: Using default hsync range of 28.00-33.00 kHz
(II) SAVAGE(0): Builtin Default Monitor: Using default vrefresh range of 43.00-72.00 Hz
(II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
(II) SAVAGE(0): Not using default mode "640x350" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x175" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x400" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "720x400" (hsync out of range)
(II) SAVAGE(0): Not using default mode "360x200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of range)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of range)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (hsync out of range)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "832x624" (hsync out of range)
(II) SAVAGE(0): Not using default mode "416x312" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(**) Option "TargetRefresh" "75.0"
(--) SAVAGE(0): Found 13 modes at this depth:
    [10e] 320 x 200, 70Hz
    [133] 320 x 240, 72Hz
    [143] 400 x 300, 72Hz
    [153] 512 x 384, 70Hz
    [11d] 640 x 400, 70Hz
    [111] 640 x 480, 85Hz, 75Hz, 72Hz, 60Hz
    [173] 720 x 480, 75Hz
    [17e] 720 x 576, 75Hz
    [114] 800 x 600, 85Hz, 75Hz, 72Hz, 60Hz, 56Hz
    [117] 1024 x 768, 85Hz, 75Hz, 70Hz, 60Hz
    [163] 1152 x 864, 75Hz, 70Hz, 60Hz
    [11a] 1280 x 1024, 85Hz, 75Hz, 60Hz
    [122] 1600 x 1200, 60Hz
(--) SAVAGE(0): Virtual size is 640x480 (pitch 640)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SAVAGE(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(==) SAVAGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.5.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.8
(II) UnloadModule: "fbdev"
(II) Unloading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) UnloadModule: "vesa"
(II) Unloading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) UnloadModule: "vga"
(II) Unloading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xf0000000 - 0xf7ffffff (0x8000000) MS[B]
	[1] 0	0	0xfbf80000 - 0xfbffffff (0x80000) MS[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xefbfe000 - 0xefbfffff (0x2000) MX[B]
	[8] -1	0	0xfbf7e000 - 0xfbf7efff (0x1000) MX[B]E
	[9] -1	0	0xfbe00000 - 0xfbefffff (0x100000) MX[B]E
	[10] -1	0	0xfbf7f000 - 0xfbf7ffff (0x1000) MX[B]E
	[11] -1	0	0xfbc00000 - 0xfbdfffff (0x200000) MX[B]
	[12] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0xfbf80000 - 0xfbffffff (0x80000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00000700 - 0x0000070f (0x10) IX[B]E
	[20] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]E
	[21] -1	0	0x00001800 - 0x0000187f (0x80) IX[B]
	[22] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[23] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(II) SAVAGE(0): VESA VBE Capabilities: 0x00000001
(--) SAVAGE(0): mapping framebuffer @ 0xf0000000 with size 0x800000
(WW) SAVAGE(0): Failed to set up write-combining range (0xf0000000,0x800000)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Using 1567 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		7 256x256 slots
(==) SAVAGE(0): Backing store disabled
(==) SAVAGE(0): DPMS disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/mouse"
(--) <default pointer>: Device: "/dev/mouse"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(==) <default pointer>: Buttons: 3
(II) Keyboard "<default keyboard>" handled by legacy driver
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
# File generated by anaconda.

Section "ServerLayout"
	Identifier     "Anaconda Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Mouse1" "SendCoreEvents"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "dri"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
#	Option	"AutoRepeat"	"500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
	#Option	"XkbOptions"	""
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"	#Option	"XkbVariant"	""
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
	Identifier  "Mouse1"
	Driver      "mouse"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "IMPS/2"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    30.0 - 82.0
	VertRefresh  56.0 - 76.0
	Option	    "dpms"
EndSection

Section "Device"
	# no known options
        #BusID
	Identifier  "S3 Savage4"
	Driver      "savage"
	VendorName  "S3 Savage4"
	BoardName   "S3 Savage4"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "S3 Savage4"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection


[X Forum]     [Xorg]     [XFree86]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Fontconfig]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Video for Linux]     [Linux RAID]     [Linux Kernel]

Powered by Linux