help - new RH9 install - X locking up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
I'm hoping someone can help me because I'm about to lose my mind. I just bit the bulet and scrapped Windows completely, and installed a new drive and installed Red Hat 9. I'm slowly forcing myself to use Linux, hopefully for good. But I'm mgetting VERY discouraged with the video.

I'm running on a P4-1.7ghz with 256mb of ram. All is working well except my X session keeps either 1) freezing so I have to hit CTRL-ALT-BKSPC to restart the X session, or 2) the X session locks hard so I have to reset the PC.

Looking in Google on this, it seems everyone in the world who's posted about this has an ATI card. And you guessed it, so do I. I have the Radeon 9600 Pro. I tried using the ATI driver and was having the same troubles. So now I've uninstalled it and am just using the VESA driver, 1024x768, 256 color as a test. It's STILL locking up every few minutes! When checking with ATI on this, they say to contact xfree86.

Here's the tail of my XFree86 log. The main things I see as being a problem are VBESetVBEMode failed and the X message about being rejected from local host. I'm basically a newbie when it comes to this. Can anyone give me some direction? Thanks!

(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 2.0
(II) VESA(0): VESA VBE Total Mem: 131072 kB
(II) VESA(0): VESA VBE OEM: ATI RADEON 9600 PRO
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: V350
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xe0000000,0x8000000)
(II) VESA(0): virtual address = 0x42136000,
physical address = 0xe0000000, size = 134217728
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is PseudoColor
(==) VESA(0): Backing store disabled
(**) Option "dpms"
(**) VESA(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
AUDIT: Tue Aug 31 23:27:24 2004: 3003 X: client 6 rejected from local host

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux