[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fatal Server Error: No Screens found



Hi,

I have done a fresh install on Red Hat Linux 7.3.
I am not able to get the GUI.

The following are the relevant files (attached):

1. XFree86.0.log
2. XF86Config-4 (as shown in the log)
3. Version of XFree86 "XFree86 Version 4.2.0"
4. Operating System "Red Hat Linux release 7.3 (Valhalla)"
5. Video Hardware "ATI Fire GL E 1,64MB for DELL M992 (19" CRT)"

Any suggestions are greatly welcome,
Thanks,
Krishna


		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail 

Attachment: XFree86.0.log
Description: XFree86.0.log

# XFree86 4.2.0 configuration generated by Xconfigurator 4.10.7

Section "ServerLayout"
	Identifier "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

# Red Hat Linux 6.0 and later use the xfs font server for improved
# interactive performance

Section "Files"
	FontPath "unix/:7100"
EndSection

# Module loading section

Section "Module"
	Load  "dbe"		# Double-buffering
	Load  "GLcore"		# OpenGL support
	Load  "dri"		# Direct rendering infrastructure
	Load  "glx"		# OpenGL X protocol interface
	Load  "extmod"		# Misc. required extensions
	Load  "v4l"		# Video4Linux
	# Load  "record"	# X event recorder
	# You only need the following two modules if you do not use xfs.
	# Load  "freetype"	 # TrueType font handler
	# Load  "type1"		# Adobe Type 1 font handler
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option      "XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option      "Device" "/dev/mouse"
	Option      "Protocol" "IMPS/2"
	Option      "Emulate3Buttons" "off"
	Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier "DELL P992"
	VendorName "Unknown"
	ModelName  "Unknown"
	HorizSync 30 - 107
	VertRefresh 48 - 170
	Option "dpms"
EndSection

Section "Device"
	Identifier "ATI|Radeon R200 QH"
	Driver "radeon"
	BoardName "Unknown"
# DRI is not currently supported on Radeon 8500, as of XFree86 4.2.0
Option "nodri"
EndSection

Section "Device"
	Identifier "Linux Frame Buffer"
	Driver "fbdev"
	BoardName "Unknown"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device "ATI|Radeon R200 QH"
	Monitor "DELL P992"
	DefaultDepth 16
	Subsection "Display"
		Depth 16
		Modes "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection
[root@Linuxws03 root]# XFree86 -version

XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] 
Build Host: daffy.perf.redhat.com
 
Module Loader present
[root@Linuxws03 root]# 
Video Card
	ATI Radeon 8500 - 64MB
Monitor
	DELL P992 ( as probed )
 	17" CRT
[root@Linuxws03 root]# cat /etc/redhat-release 
Red Hat Linux release 7.3 (Valhalla)
[root@Linuxws03 root]# 

[X Forum]     [Xorg]     [XFree86]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Fontconfig]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Video for Linux]     [Linux RAID]     [Linux Kernel]

Powered by Linux