[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Google
  Web www.spinics.net

Re: Problems with XFree on my laptop



Your main (possibly not only) problem is that you specify VertRefresh 10 nothing will work
properly with that 60 for a LCD would be OK
I tried to clean you XF86Config as follows below.
I looked at http://www.linux-laptop.net  one of the best place for info but the links for the
1530D lead nowhere. you may also want to check the one for the 1540D:
http://www.cygnet.co.uk/steve/LinuxCompaq1540.html
BUT would have to remove the higher resolution from the mode lines otherwise you will get a window
on a large screen
remove the virtual screens everywhere if you want your peace...

a possible XF86Config (without garantee...)


Section "Files" 
 
    RgbPath "/usr/X11R6/lib/X11/rgb" 
 
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
 
 
#    ModulePath "/usr/X11R6/lib/modules"
 
EndSection
 
# Section "Module"
#
# This loads the module for the Joystick driver
#
# Load "xf86Jstk.so"
# 
# EndSection
 
 
Section "Keyboard"
 
    Protocol "Standard"
 
    AutoRepeat 500 5
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
 
 
    XkbKeymap   "xfree86(de)"
 

EndSection
 
 
Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/mouse"
 
 
# Baudrate and SampleRate are only for some Logitech mice
 
#    BaudRate 9600
#    SampleRate 150
 
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
 
#    Emulate3Buttons
#    Emulate3Timeout    50
 
# ChordMiddle is an option for some 3-button Logitech mice
 
#    ChordMiddle
 
EndSection
 


# Any number of monitor sections may be present
 
Section "Monitor"
 
    Identifier  "My Monitor"
    VendorName  "Unknown"
    ModelName   "Unknown"
 
 
    HorizSync   31.5         # **** Sure you don't want to put a range?
 
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50  # multiple ranges of sync frequencies
 
 
    VertRefresh 60           # 10 won't give you much....
 
# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.
 
# These two are equivalent
 
#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
 
#    Mode "1024x768i"
#        DotClock 45
#        HTimings 1024 1048 1208 1264
#        VTimings 768 776 784 817
#        Flags  "Interlace"
#    EndMode
 
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
 
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace
 
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync
 
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x400"     36     640  696  752  832   480  481  484  509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace
 
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
 
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync
 
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
 
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
 
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
 
 

 
EndSection
 

# **********************************************************************
# Graphics device section
# **********************************************************************
 
# Any number of graphics device sections may be present
 
# Standard VGA Device:
 
Section "Device"
    Identifier "Generic VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    Chipset "generic"
#    Option      "no_accel"
#    Option      "sw_cursor"
#    VideoRam 256
 
#    Clocks 25.2 28.3
 
EndSection
 
# Sample Device for accelerated server:
 
# Section "Device"
#    Identifier "Actix GE32+ 2MB"
#    VendorName "Actix"
#    BoardName "GE32+"
#    Ramdac "ATT20C490"
#    Dacspeed 110
#    Option "dac_8_bit"
#    Clocks  25.0  28.0  40.0   0.0  50.0  77.0  36.0  45.0
#    Clocks 130.0 120.0  80.0  31.0 110.0  65.0  75.0  94.0
# EndSection
 
# Sample Device for Hercules mono card:
 

 
# Device configured by xf86config:
 
Section "Device"
    Identifier  "My Video Card"
    VendorName  "Unknown"
    BoardName   "Unknown"
    #VideoRam    512
    # Insert Clocks lines here if appropriate
EndSection
 

# **********************************************************************
# Screen sections
# **********************************************************************
 
# The Colour SVGA server
 
Section "Screen"
    Driver      "svga"
    Device      "Generic VGA"
    #Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       8
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
# The 16-color VGA server
 
Section "Screen"
    Driver      "vga16"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 
# The Mono server
 
Section "Screen"
    Driver      "vga2"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection
 
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)
 
Section "Screen"
    Driver      "accel"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[XFree86]     [Xfree86 Xpert]     [Xorg]     [IETF Annouce]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]     [Linux Resources]

Powered by Linux