i830graphic on Solaris8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 I compiled xfree86-4.2.0 on Solaris8. and installed it.
Then I tried to run "XFree86 -configure /etc/X11/XF86Config.
Next my machine was freezing. are there anything wrong in my setting?

I quote the log and XF86Config files below. I appreciate your any help!


BTW, at first, I tryed to vesa driver.


=========================
/var/log/XFree86.0.log
=========================

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: SunOS 5.8 Generic_108529-13 i86pc
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 18 22:52:30 2002
(++) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "My Video Card"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "jp106"
(**) XKB: model: "jp106"
(**) Option "XkbLayout" "jp"
(**) XKB: layout: "jp"
(==) Keyboard: CustomKeycode disabled
(==) FontPath set to
"/usr/local/X11R6/lib/X11/fonts/misc/,/usr/local/X11R6/lib/X11/fonts/Speedo/,/usr/local/X11R6/lib/X11/fonts/Type1/,/usr/local/X11R6/lib/X11/fonts/CID/,/usr/local/X11R6/lib/X11/fonts/75dpi/,/usr/local/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/local/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/local/X11R6/lib/modules"
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/local/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/local/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8002403c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3575 card 104d,8100 rev 04 class 06,00,00
hdr 00
(II) PCI: 00:02:0: chip 8086,3577 card 104d,8100 rev 04 class 03,00,00
hdr 80
(II) PCI: 00:02:1: chip 8086,3577 card 104d,8100 rev 00 class 03,80,00
hdr 80
(II) PCI: 00:1d:0: chip 8086,2482 card 104d,8100 rev 02 class 0c,03,00
hdr 80
(II) PCI: 00:1d:1: chip 8086,2484 card 104d,8100 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1d:2: chip 8086,2487 card 104d,8100 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 104d,8100 rev 02 class 01,01,8a
hdr 00
(II) PCI: 00:1f:3: chip 8086,2483 card 104d,8100 rev 02 class 0c,05,00
hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 104d,8100 rev 02 class 04,01,00
hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 104d,8100 rev 02 class 07,03,00
hdr 00
(II) PCI: 02:02:0: chip 104c,8023 card 104d,8100 rev 00 class 0c,00,10
hdr 00
(II) PCI: 02:05:0: chip 1180,0475 card 0000,0000 rev 80 class 06,07,00
hdr 02
(II) PCI: 02:08:0: chip 8086,1031 card 104d,8100 rev 42 class 02,00,00
hdr 00
(II) PCI: 02:0b:0: chip 104c,ac50 card 0000,0000 rev 01 class 06,07,00
hdr 02
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/local/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/local/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x04 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xe0200000 - 0xe02fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19
(--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe0204000 - 0xe0207fff (0x4000) MX[B]E
[1] -1 0xe0200000 - 0xe03fffff (0x200000) MX[B]E
[2] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E
[3] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
[4] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
[5] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[6] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[7] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[8] -1 0x00003000 - 0x000030ff (0x100) IX[B]E
[9] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[10] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[11] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[12] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[13] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[14] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[15] -1 0x00001840 - 0x0000187f (0x40) IX[B]E
[16] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[17] -1 0x00001800 - 0x000018ff (0x100) IX[B]E
(II) Inactive PCI resource ranges:
[0] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[1] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[2] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[3] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xe0204000 from 0xe0207fff to
0xe0204fff
(II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to
0xe0203fff
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to
0x0000185f
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to
0x0000181f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E
[1] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E
[2] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E
[3] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
[4] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
[5] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[6] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[7] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[8] -1 0x00003000 - 0x000030ff (0x100) IX[B]E
[9] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[10] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[11] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[12] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[13] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[14] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[15] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[16] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[17] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[1] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[2] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[3] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E
[6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E
[7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E
[8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
[9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
[10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x00003000 - 0x000030ff (0x100) IX[B]E
[16] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[17] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[19] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[20] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[21] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[22] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[23] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[24] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[25] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[26] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[27] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[28] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/local/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/local/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/local/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/local/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "vesa"
(II) Loading /usr/local/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/local/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00:02:0
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E
[6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E
[7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E
[8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
[9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
[10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x00003000 - 0x000030ff (0x100) IX[B]E
[16] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[17] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[18] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[19] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[20] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[21] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[22] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[23] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[24] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[25] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[26] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[27] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[28] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E
[6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E
[7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E
[8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E
[9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
[10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
[12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x00003000 - 0x000030ff (0x100) IX[B]E
[19] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[20] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[25] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[26] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[27] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[28] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[29] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[30] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[31] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[32] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/local/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) VESA(0): initializing int10
(WW) VESA(0): Bad V_BIOS checksum
(II) VESA(0): Primary V_BIOS segment is: 0xc000
c000:01a2: 62 ILLEGAL X86 OPCODE!
(II) VESA(0): VESA BIOS not detected
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) Unloading /usr/local/X11R6/lib/modules/libint10.a
(II) UnloadModule: "vbe"
(II) Unloading /usr/local/X11R6/lib/modules/libvbe.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found



===========================
/etc/X11/XF86Config
===========================

#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
# Load "glx"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/local/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc106"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "jp"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "jp106"
Option "XkbLayout" "jp"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IntelliMouse"
Option "Device" "/dev/kdmouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30.0 - 70.0

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Option "NoDDC"
Identifier "My Video Card"
Driver "vesa"
# unsupported card
#VideoRam 32768
VideoRam 16384
#Option "UseFBDev" "false"
BusID "PCI:0:2:0"
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "My Video Card"
Monitor "My Monitor"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection



Eitarou Kamo




_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[Index of Archives]     [XFree86]     [Xfree86 Xpert]     [X.org]     [IETF Annouce]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]

  Powered by Linux