[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Google
  Web www.spinics.net

Re: XFree 4.2.0 and GeForce2 Go = No Go



did you get the nvidia drivers (closed source on their site) 
look also at http://www.linux-laptop.net/
Lionel


--- Lars Hecking <lhecking@nmrc.ucc.ie> wrote:
> 
>  Hi all,
> 
>  I cannot get X to work at all on my laptop.
> 
>  OpenBSD 3.1 i386 (release version)
>  XFree 4.2.0
> 
>  XFree86 -configure identifies the card as NVidia GeForce2 Go rev 178.
>  When I subsequentlY RUN xFree86 -xf86config /root/XF86Config.new, X starts up,
>  but the display is completely garbled - sorry, I have no better word
>  to describe it.
> 
>  XFree86.0.log excerpt (the full file is about 30k - available on request):
> 
> XFree86 Version 4.2.0 (for OpenBSD) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 23 January 2002
>         If the server is older than 6-12 months, or if your card is
>         newer than the above date, look for a newer version before
>         reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: OpenBSD 3.1 i386
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Wed Aug 14 12:28:47 2002
> (++) Using config file: "/root/XF86Config.new"
> (==) ServerLayout "XFree86 Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (==) Keyboard: CustomKeycode disabled
> [...]
> (--) PCI:*(1:0:0) NVidia GeForce2 Go rev 178, Mem @ 0xd1000000/24, 0xf0000000/27
> [...]
> (II) LoadModule: "nv"
> (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
> (II) Module nv: vendor="The XFree86 Project"
>         compiled for 4.2.0, module version = 1.0.1
>         Module class: XFree86 Video Driver
>         ABI class: XFree86 Video Driver, version 0.5
> [...]
> (II) NV: driver for NVIDIA chipsets: RIVA128, RIVA TNT, RIVA TNT2,
>         RIVA TNT2 Ultra, Vanta, RIVA TNT2 M64, Aladdin TNT2, GeForce 256,
>         GeForce DDR, Quadro, GeForce2 GTS/Pro, GeForce2 Ti, GeForce2 Ultra,
>         Quadro2 Pro, GeForce2 MX/MX 400, GeForce2 MX 100/200, 0x0170, 0x0171,
>         0x0172, 0x0173, 0x0174, 0x0175, 0x0178, 0x017A, 0x017B, 0x017C,
>         GeForce2 Integrated, Quadro2 MXR, GeForce2 Go, GeForce3,
>         GeForce3 Ti 200, GeForce3 Ti 500, Quadro DDC, 0x0250, 0x0258
> [...]
> (II) NV(0): Initializing int10
> (II) checkDevMem: using aperture driver /dev/xf86
> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) NV(0): Write-combining range (0xf0000,0x10000)
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (--) NV(0): Chipset: "GeForce2 Go"
> (==) NV(0): Depth 8, (==) framebuffer bpp 8
> (==) NV(0): Default visual is PseudoColor
> [...]
> (==) NV(0): Using HW cursor
> (--) NV(0): Linear framebuffer at 0xF0000000
> (--) NV(0): MMIO registers at 0xD1000000
> (==) NV(0): Write-combining range (0xd1710000,0x10000) was already clear
> (==) NV(0): Write-combining range (0xd1600000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd1680000,0x3000) was already clear
> (==) NV(0): Write-combining range (0xd1100000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd1002000,0x2000) was already clear
> (==) NV(0): Write-combining range (0xd1400000,0x2000) was already clear
> (==) NV(0): Write-combining range (0xd1101000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd1009000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd1000000,0x9000) was already clear
> (==) NV(0): Write-combining range (0xd1800000,0x10000) was already clear
> (==) NV(0): Write-combining range (0xd1601000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd1681000,0x1000) was already clear
> (==) NV(0): Write-combining range (0xd10c0000,0x1000) was already clear
> (--) NV(0): VideoRAM: 16384 kBytes
> [...]
> (WW) NV(0): Monitor0: Using default hsync range of 28.00-33.00kHz
> (WW) NV(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
> (II) NV(0): Clock range:  12.00 to 350.00 MHz
> (II) NV(0): Not using default mode "640x350" (hsync out of range)
> [about 70 modes not used]
> (--) NV(0): Virtual size is 640x480 (pitch 640)
> (**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync
> -vsync
> (**) NV(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
> (II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doubles
> can -hsync -vsync
> (==) NV(0): DPI set to (75, 75)
> [...]
> (==) NV(0): Write-combining range (0xd1000000,0x1000000) was already clear
> (==) NV(0): Write-combining range (0xf0000000,0x1000000)
> (==) NV(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
>         Screen to screen bit blits
>         Solid filled rectangles
>         8x8 mono pattern filled rectangles
>         Indirect CPU to Screen color expansion
>         Solid Lines
>         Offscreen Pixmaps
>         Setting up tile and stipple cache:
>                 32 128x128 slots
>                 32 256x256 slots
>                 16 512x512 slots
> (==) NV(0): Backing store disabled
> (==) NV(0): Silken mouse enabled
> [...]
> (**) Option "Protocol" "wsmouse"
> (**) Mouse0: Protocol: wsmouse
> (**) Option "CorePointer"
> (**) Mouse0: Core Pointer
> (**) Option "Device" "/dev/wsmouse0"
> (==) Mouse0: Buttons: 3
> (II) Keyboard "Keyboard0" handled by legacy driver
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (II) PM Event received: Unknown Event
> (II) PM Event received: Unknown Event
> 
>  The card works fine under SuSE 8.0pro, 1024x768/16bit, possibly because
>  SuSE ships with NVidia's own driver.
> 
>  Any ideas? How can I help to identify the problem and get this to work?
> 
> _______________________________________________
> 
> Newbie@XFree86.Org
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie


__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[XFree86]     [Xfree86 Xpert]     [Xorg]     [IETF Annouce]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]     [Linux Resources]

Powered by Linux