Re: I want the middle mouse button to work (Serial mouse)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



uncomment the ZAxisMapping line.

On Tue, 13 Aug 2002 19:23:36 +0500 (GMT-5)
"Johann Oskarsson" <myrkraverk@users.sourceforge.net> wrote:

> Hello,
> 
> First, I want to thank you guys for making XFree and making my life 
> possible :)
> 
> Then I want my middle mouse button to work.  I'm using a (what looks like
> an old) serial mouse with three buttons.  It works fine except the middle
> button does not work in X.  But it works in console.  So it must, no it
> *shall* work under X, too.  gpm sais it's using the original Microsoft
> protocol with a middle button extension, and seems to be working fine (at
> least simple paste works).  Changing the protocol to mousesystems or
> something else does not help in X, it either works just the same,
> completely insane or not at all.  Does it help to use gpm as a repeater
> for X?  I'm not really sure what that does so I haven't tryed.
> 
> This is X -version:
> 
> > XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) 
> > / X Window System
> > (protocol Version 11, revision 0, vendor release 6510)
> > Release Date: 2 June 2001
> >         If the server is older than 6-12 months, or if your card is
> >         newer than the above date, look for a newer version before
> >         reporting problems.  (See http://www.XFree86.Org/FAQ)
> > Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] 
> > Build Host: stripples.devel.redhat.com
> >  
> > Module Loader present
> 
> And this is the mouse section from /etc/X11/XF86Config-4:
> 
> > Section "InputDevice"
> >         Identifier      "Mouse0"
> >         # Modified by mouseconfig
> >         # end then by myrkraverk
> >         Driver          "mouse"
> >         Option          "Device"                "/dev/mouse"
> >         Option          "Protocol"              "Microsoft"
> >         Option          "Buttons"               "3"
> >         Option          "Emulate3Buttons"       "yes"
> > #       Option          "ZAxisMapping"          "4 5"
> > #       Option          "Buttons"               "5"
> > EndSection
> 
> Both without the quoting stuff of course.
> 
> 
> Thanx for whatever help I can get,
> 
> Johann
> 
> 
> _______________________________________________
> 
> Newbie@XFree86.Org
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
> 
_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[Index of Archives]     [XFree86]     [Xfree86 Xpert]     [X.org]     [IETF Annouce]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]

  Powered by Linux