Re: How to support interface vlan trunk | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
On Wed, Aug 01, 2007 at 11:19:53AM +0200, Jonathan Petersson wrote: > I recently did a similar installation, effectively, provided that LAN 2 > and 3 are tagged to eth0 in the switch and the same for eth1 it's enough > to activate > sysctl net.ipv4.ip_forward=1 Unless he expects LAN2 to be bridged to LAN2 :-). I was thinking about creating a bridge between eth0.2 and eth1.2, and between eth0.3 and eth1.3, and route the bridge interfaces. Anyway, with this suggestion added, it should be rather easy to envision a good solution :-). Or better: to know what to ask next :-). _______________________________________________ Vlan mailing list Vlan@xxxxxxxxxxxxxxx http://www.candelatech.com/mailman/listinfo/vlan
[Site Home] [Netdev] [Ethernet Bridging] [Linux Wireless] [Kernel Newbies] [Memory] [Security] [Linux for Hams] [Netfilter] [Bugtraq] [Rubini] [Photo] [Yosemite] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux Admin] [Samba] [Video 4 Linux] [Linux Resources]