Re: bnx2 issue?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Andy Gorev wrote:
Vlan 1 is often a bad choice because switches use it for management traffic..Hello gurus. Please help me explain following problem.I have IBM blade HS21 with SLES 9.3 and last vanilla kernel 2.6.21 (also trying from distro with similar problem).ifconfig eth0 10.241.201.22 up ping 10.241.200.10 - all is ok in this step ifconfig eth0 0.0.0.0 vconfig add eth0 1 ifconfig vlan1 10.241.201.22 up After that I have only one route through vlan1 ping 10.241.200.10 - destination host unreachableWhat can be problem here? bnx2 module or 8021q? My Nortel configured with vlan 1. While ping is running I can see that arp-replies didn't pass from eth0 to vlan1.
try vlan 2-4094 instead and see if that fixes the problem. Thanks, Ben --Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com
_______________________________________________ Vlan mailing list Vlan@xxxxxxxxxxxxxxx http://www.candelatech.com/mailman/listinfo/vlan
[Netdev] [Ethernet Bridging] [Linux Wireless] [Kernel Newbies] [Security] [Linux for Hams] [Netfilter] [Bugtraq] [Photo] [Yosemite] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux Admin] [Samba] [Video 4 Linux] [Linux Resources]