RE: Mixing tagged and untagged vlans using via-velocity driver | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
> Without looking at the source code I guess the hardware has > the ability to put in a vlan tag, and remove a vlan tag so > the kernel sees an untagged ethernet frame. > Usually this can be turned on and off. > Looking at the source code you have to explicitly turn it off > using enable_tagging=0. > Anyway: It seems this driver does not support the vlan code > in the kernel, so you have to use the soft version. Yes, you are correct. This card has built-in support for vlan tagging. I am passing enable_tagging=0, but it doesn't help. I just tried the same setup using a 3c905C card and then it works perfectly (this card does not support hw vlan tagging). Are you refering to vconfig when you talk about "soft version" or am I missing something? Nicklas _______________________________________________ Vlan mailing list Vlan@xxxxxxxxxxxxxxx http://www.candelatech.com/mailman/listinfo/vlan
[Netdev] [Ethernet Bridging] [Linux Wireless] [Kernel Newbies] [Security] [Linux for Hams] [Netfilter] [Bugtraq] [Photo] [Yosemite] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux RAID] [Linux Admin] [Samba] [Video 4 Linux] [Linux Resources]