|
|
|
No audio on Kworld 305u id: eb1a:e305 | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Hi I recently bought an external ( USB ) tv tuner card from hytech. It reports itself as a trident chip with vendor id : 0xeb1a and product id as 0xe305. following the directions from various posts i finally get the the tuner working but i just had the video and no audio. i recompiled the alsa to the last version (see below) and recompile the v4l driver to get the card running, my distro is ubuntu and the kernel is 2.6.32-22 (see below) *cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.23. Compiled on Jun 26 2010 for kernel 2.6.32-22-generic (SMP).* * $ uname -ar Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux* i tried to modprobe em28xx-audio and em28xx-alsa with no sucess if you see dmesg (attached) it reports errors related to unknown symbols on both modules. is there anything a have missed? hope someone can help me Regards, Tony
Module Size Used by snd_usb_audio 83743 0 snd_usbmidi_lib 16305 1 snd_usb_audio dm_crypt 11331 0 binfmt_misc 6587 1 ppdev 5259 0 vboxnetadp 6390 0 vboxnetflt 12740 0 vboxdrv 168753 2 vboxnetadp,vboxnetflt tuner_xc2028 20021 1 snd_hda_codec_idt 53852 1 snd_hda_codec_intelhdmi 9495 1 snd_hda_intel 20767 2 tuner 20386 1 snd_hda_codec 86936 3 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel snd_hwdep 5604 2 snd_usb_audio,snd_hda_codec snd_pcm_oss 34539 0 snd_mixer_oss 13897 1 snd_pcm_oss tvp5150 15641 1 snd_pcm 71582 4 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 1434 0 snd_seq_oss 27242 0 snd_seq_midi 4557 0 ir_sony_decoder 3038 0 snd_rawmidi 19077 2 snd_usbmidi_lib,snd_seq_midi snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi joydev 8708 0 snd_seq 47530 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ir_jvc_decoder 3065 0 em28xx 85470 0 v4l2_common 17413 3 tuner,tvp5150,em28xx ir_rc6_decoder 3577 0 ir_rc5_decoder 3161 0 snd_timer 18646 2 snd_pcm,snd_seq snd_seq_device 5988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq videobuf_vmalloc 4575 1 em28xx snd 56303 21 snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ir_nec_decoder 3193 0 videobuf_core 16713 2 em28xx,videobuf_vmalloc ir_common 5123 1 em28xx lib80211_crypt_tkip 7596 0 dell_wmi 1793 0 ir_core 13322 7 ir_sony_decoder,ir_jvc_decoder,em28xx,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,ir_common soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm sdhci_pci 5470 0 sdhci 15462 1 sdhci_pci dell_laptop 6856 0 dcdbas 5422 1 dell_laptop wl 1959598 0 lib80211 5046 2 lib80211_crypt_tkip,wl uvcvideo 55363 0 tveeprom 11038 1 em28xx led_class 2864 1 sdhci videodev 42170 5 tuner,tvp5150,em28xx,v4l2_common,uvcvideo v4l1_compat 13251 2 uvcvideo,videodev psmouse 63245 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp dm_raid45 81647 0 xor 15028 1 dm_raid45 fbcon 35102 71 tileblit 2031 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit vga16fb 11385 0 vgastate 8961 1 vga16fb usbhid 36110 0 hid 67032 1 usbhid i915 282354 3 ohci1394 26950 0 drm_kms_helper 29297 1 i915 drm 162471 4 i915,drm_kms_helper ieee1394 81181 1 ohci1394 ahci 32008 2 intel_agp 24177 2 i915 sky2 40775 0 agpgart 31724 2 drm,intel_agp i2c_algo_bit 5028 1 i915 video 17375 1 i915 output 1871 1 video ramzswap 6362 1 xvmalloc 4074 1 ramzswap lzo_decompress 2189 1 ramzswap lzo_compress 1853 1 ramzswap
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID eb1a:e305 eMPIA Technology, Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf66d800 (usable) [ 0.000000] BIOS-e820: 00000000bf66d800 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbf66d max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf66d800 (usable) [ 0.000000] modified: 00000000bf66d800 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 372fe000 - 37fefd9f [ 0.000000] Allocated new RAMDISK: 008de000 - 015cfd9f [ 0.000000] Move RAMDISK from 00000000372fe000 - 0000000037fefd9e to 008de000 - 015cfd9e [ 0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bf66f200 00064 (v01 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: FACP bf66f09c 000F4 (v04 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS bf67e000 00040 [ 0.000000] ACPI: HPET bf66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC bf66f400 00068 (v01 DELL M08 27D8061B ASL 00000047) [ 0.000000] ACPI: MCFG bf66f3c0 0003E (v16 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: SLIC bf66f49c 00176 (v01 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: OSFR bf66ea00 0008A (v01 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: BOOT bf66efc0 00028 (v01 DELL M08 27D8061B ASL 00000061) [ 0.000000] ACPI: SSDT bf66d9c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd184] BRK ==> [00008da000 - 00008dd184] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 00015cfd9f] NEW RAMDISK ==> [00008de000 - 00015cfd9f] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf66d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf66d [ 0.000000] On node 0 totalpages: 783880 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15d1000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4349 pages used for memmap [ 0.000000] HighMem zone: 552306 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777755 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=258761bd-4d7f-477c-8542-76e6e9b55fe2 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15679620 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf66d) [ 0.000000] Memory: 3072336k/3135924k available (4673k kernel code, 62144k reserved, 2121k data, 656k init, 2226620k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1861.617 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.23 BogoMIPS (lpj=7446468) [ 0.004026] Security Framework initialized [ 0.004050] AppArmor: AppArmor initialized [ 0.004058] Mount-cache hash table entries: 512 [ 0.004212] Initializing cgroup subsys ns [ 0.004216] Initializing cgroup subsys cpuacct [ 0.004221] Initializing cgroup subsys memory [ 0.004229] Initializing cgroup subsys devices [ 0.004232] Initializing cgroup subsys freezer [ 0.004235] Initializing cgroup subsys net_cls [ 0.004257] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004260] CPU: L2 cache: 1024K [ 0.004264] CPU: Physical Processor ID: 0 [ 0.004266] CPU: Processor Core ID: 0 [ 0.004269] mce: CPU supports 6 MCE banks [ 0.004280] CPU0: Thermal monitoring enabled (TM2) [ 0.004283] using mwait in idle threads. [ 0.004292] Performance Events: Core2 events, Intel PMU driver. [ 0.004302] ... version: 2 [ 0.004304] ... bit width: 40 [ 0.004306] ... generic registers: 2 [ 0.004308] ... value mask: 000000ffffffffff [ 0.004310] ... max period: 000000007fffffff [ 0.004312] ... fixed-purpose events: 3 [ 0.004314] ... event mask: 0000000700000003 [ 0.004319] Checking 'hlt' instruction... OK. [ 0.022979] ACPI: Core revision 20090903 [ 0.036010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036017] ftrace: allocating 21771 entries in 43 pages [ 0.040070] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083591] CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.168057] CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d [ 0.168071] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172022] Brought up 2 CPUs [ 0.172025] Total of 2 processors activated (7447.18 BogoMIPS). [ 0.172423] CPU0 attaching sched-domain: [ 0.172427] domain 0: span 0-1 level MC [ 0.172430] groups: 0 1 [ 0.172437] CPU1 attaching sched-domain: [ 0.172439] domain 0: span 0-1 level MC [ 0.172442] groups: 1 0 [ 0.172552] devtmpfs: initialized [ 0.172552] regulator: core version 0.5 [ 0.172552] Time: 8:44:35 Date: 06/27/10 [ 0.172552] NET: Registered protocol family 16 [ 0.172552] Trying to unpack rootfs image as initramfs... [ 0.172552] EISA bus registered [ 0.172552] ACPI: bus type pci registered [ 0.172552] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.172552] PCI: MCFG area at f8000000 reserved in E820 [ 0.172552] PCI: Using MMCONFIG for extended config space [ 0.172552] PCI: Using configuration type 1 for base access [ 0.176159] bio: create slab <bio-0> at 0 [ 0.177208] ACPI: EC: Look up EC in DSDT [ 0.202740] ACPI: Interpreter enabled [ 0.202752] ACPI: (supports S0 S3 S4 S5) [ 0.202778] ACPI: Using IOAPIC for interrupt routing [ 0.248662] ACPI: No dock devices found. [ 0.267971] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.268140] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] [ 0.268150] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.268156] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] [ 0.268211] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] [ 0.268351] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.268430] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.268519] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.268600] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.268607] pci 0000:00:1a.7: PME# disabled [ 0.268673] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.268749] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.268755] pci 0000:00:1b.0: PME# disabled [ 0.268870] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.268876] pci 0000:00:1c.0: PME# disabled [ 0.268998] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.269004] pci 0000:00:1c.1: PME# disabled [ 0.269127] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.269132] pci 0000:00:1c.4: PME# disabled [ 0.269213] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.269293] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.269376] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.269462] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.269539] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.269546] pci 0000:00:1d.7: PME# disabled [ 0.269759] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.269764] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.269769] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.269774] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.269779] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.269845] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.269855] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.269864] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.269874] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.269883] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.269974] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.269983] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.269993] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.270003] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.270012] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] [ 0.270022] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] [ 0.270077] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270082] pci 0000:00:1f.2: PME# disabled [ 0.270123] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] [ 0.270153] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.270278] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.270291] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] [ 0.270393] pci 0000:09:00.0: supports D1 D2 [ 0.270396] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.270404] pci 0000:09:00.0: PME# disabled [ 0.270499] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.270506] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.270732] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff] [ 0.270968] pci 0000:0b:00.0: supports D1 D2 [ 0.270970] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.270983] pci 0000:0b:00.0: PME# disabled [ 0.271142] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.271223] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.271229] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff] [ 0.271239] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.271311] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff] [ 0.271385] pci 0000:02:09.0: supports D1 D2 [ 0.271387] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271393] pci 0000:02:09.0: PME# disabled [ 0.271445] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff] [ 0.271520] pci 0000:02:09.1: supports D1 D2 [ 0.271522] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271528] pci 0000:02:09.1: PME# disabled [ 0.271581] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff] [ 0.271655] pci 0000:02:09.2: supports D1 D2 [ 0.271658] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271663] pci 0000:02:09.2: PME# disabled [ 0.271716] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff] [ 0.271787] pci 0000:02:09.3: supports D1 D2 [ 0.271790] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271796] pci 0000:02:09.3: PME# disabled [ 0.271862] pci 0000:00:1e.0: transparent bridge [ 0.271872] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] [ 0.271915] pci_bus 0000:00: on NUMA node 0 [ 0.271929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.272259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.272422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.272508] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.272596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.287405] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.287542] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.287673] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.287788] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.287924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.288073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.288209] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.288332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.288477] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.288499] vgaarb: loaded [ 0.288643] SCSI subsystem initialized [ 0.288762] libata version 3.00 loaded. [ 0.288846] usbcore: registered new interface driver usbfs [ 0.288860] usbcore: registered new interface driver hub [ 0.288888] usbcore: registered new device driver usb [ 0.289089] ACPI: WMI: Mapper loaded [ 0.289092] PCI: Using ACPI for IRQ routing [ 0.289415] NetLabel: Initializing [ 0.289417] NetLabel: domain hash size = 128 [ 0.289419] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.289434] NetLabel: unlabeled traffic allowed by default [ 0.289480] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.289486] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.296066] Switching to clocksource tsc [ 0.298466] AppArmor: AppArmor Filesystem Enabled [ 0.298488] pnp: PnP ACPI init [ 0.298512] ACPI: bus type pnp registered [ 0.318963] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.318967] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.319084] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.319088] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.319092] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.319096] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.341529] pnp: PnP ACPI: found 13 devices [ 0.341533] ACPI: ACPI bus type pnp unregistered [ 0.341537] PnPBIOS: Disabled by ACPI PNP [ 0.341555] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved [ 0.341558] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved [ 0.341569] system 00:06: ioport range 0xc80-0xcff could not be reserved [ 0.341578] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.341585] system 00:0a: ioport range 0x900-0x97f has been reserved [ 0.341588] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.341596] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 0.341599] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 0.341602] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 0.341606] system 00:0b: ioport range 0x809-0x809 has been reserved [ 0.341613] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 0.341616] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 0.341619] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.341623] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.341626] system 00:0c: iomem range 0x100000-0xbf66d7ff could not be reserved [ 0.341630] system 00:0c: iomem range 0xbf66d800-0xbf6fffff has been reserved [ 0.341633] system 00:0c: iomem range 0xbf700000-0xbf7fffff has been reserved [ 0.341636] system 00:0c: iomem range 0xbf700000-0xbfefffff could not be reserved [ 0.341640] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved [ 0.341643] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.341647] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.341650] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.341653] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.341657] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.341660] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.341663] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.341667] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.341670] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.341673] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.376491] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 [ 0.376497] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.376505] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff [ 0.376511] pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff [ 0.376522] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b [ 0.376526] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.376534] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff [ 0.376540] pci 0000:00:1c.1: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 0.376550] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c [ 0.376554] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.376562] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff [ 0.376568] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.376578] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.376581] pci 0000:00:1e.0: IO window: disabled [ 0.376588] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 0.376594] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.376622] alloc irq_desc for 16 on node -1 [ 0.376625] alloc kstat_irqs on node -1 [ 0.376633] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.376641] pci 0000:00:1c.0: setting latency timer to 64 [ 0.376653] alloc irq_desc for 17 on node -1 [ 0.376655] alloc kstat_irqs on node -1 [ 0.376660] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.376666] pci 0000:00:1c.1: setting latency timer to 64 [ 0.376678] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.376684] pci 0000:00:1c.4: setting latency timer to 64 [ 0.376695] pci 0000:00:1e.0: setting latency timer to 64 [ 0.376701] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.376704] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.376707] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] [ 0.376710] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.376713] pci_bus 0000:09: resource 2 pref mem [0xc0000000-0xc01fffff] [ 0.376716] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] [ 0.376718] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff] [ 0.376721] pci_bus 0000:0b: resource 2 pref mem [0xc0200000-0xc03fffff] [ 0.376724] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff] [ 0.376727] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff] [ 0.376730] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.376733] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff] [ 0.376735] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.376738] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.376785] NET: Registered protocol family 2 [ 0.376909] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.377328] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.377988] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.378347] TCP: Hash tables configured (established 131072 bind 65536) [ 0.378350] TCP reno registered [ 0.378479] NET: Registered protocol family 1 [ 0.378506] pci 0000:00:02.0: Boot video device [ 0.378734] Simple Boot Flag at 0x79 set to 0x1 [ 0.378941] cpufreq-nforce2: No nForce2 chipset. [ 0.378973] Scanning for low memory corruption every 60 seconds [ 0.379109] audit: initializing netlink socket (disabled) [ 0.379122] type=2000 audit(1277628275.375:1): initialized [ 0.389998] highmem bounce pool size: 64 pages [ 0.390005] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.391785] VFS: Disk quotas dquot_6.5.2 [ 0.391866] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.392527] fuse init (API version 7.13) [ 0.392627] msgmni has been set to 1653 [ 0.392889] alg: No test for stdrng (krng) [ 0.392965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.392969] io scheduler noop registered [ 0.392971] io scheduler anticipatory registered [ 0.392973] io scheduler deadline registered [ 0.393021] io scheduler cfq registered (default) [ 0.393229] alloc irq_desc for 24 on node -1 [ 0.393231] alloc kstat_irqs on node -1 [ 0.393246] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.393260] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.393451] alloc irq_desc for 25 on node -1 [ 0.393453] alloc kstat_irqs on node -1 [ 0.393463] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.393476] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.393664] alloc irq_desc for 26 on node -1 [ 0.393666] alloc kstat_irqs on node -1 [ 0.393676] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.393689] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.393812] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.393925] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.394079] ACPI: AC Adapter [AC] (on-line) [ 0.394166] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.394791] ACPI: Lid Switch [LID] [ 0.394844] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.394851] ACPI: Power Button [PBTN] [ 0.394901] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.394904] ACPI: Sleep Button [SBTN] [ 0.395662] ACPI: SSDT bf66e4f6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.396224] ACPI: SSDT bf66de8c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.396683] Monitor-Mwait will be used to enter C-1 state [ 0.396715] Monitor-Mwait will be used to enter C-2 state [ 0.396739] Monitor-Mwait will be used to enter C-3 state [ 0.396746] Marking TSC unstable due to TSC halts in idle [ 0.396831] processor LNXCPU:00: registered as cooling_device0 [ 0.397235] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.397594] ACPI: SSDT bf66e471 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.397909] Switching to clocksource hpet [ 0.405473] processor LNXCPU:01: registered as cooling_device1 [ 0.407775] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.407789] ACPI: Thermal Zone [THM] (58 C) [ 0.409560] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.411139] brd: module loaded [ 0.411664] loop: module loaded [ 0.411772] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.411902] ata_piix 0000:00:1f.1: version 2.13 [ 0.411919] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.411970] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.412113] scsi0 : ata_piix [ 0.412214] scsi1 : ata_piix [ 0.412906] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.412910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.413296] Fixed MDIO Bus: probed [ 0.413338] PPP generic driver version 2.4.2 [ 0.413402] tun: Universal TUN/TAP device driver, 1.6 [ 0.413404] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.413508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.413534] alloc irq_desc for 22 on node -1 [ 0.413536] alloc kstat_irqs on node -1 [ 0.413543] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.413565] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.413569] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.413615] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.413649] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.417529] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.417552] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.421529] isapnp: Scanning for PnP cards... [ 0.469174] ACPI: Battery Slot [BAT0] (battery present) [ 0.469238] ata2: port disabled. ignoring. [ 0.475438] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.475604] usb usb1: configuration #1 chosen from 1 choice [ 0.475639] hub 1-0:1.0: USB hub found [ 0.475657] hub 1-0:1.0: 4 ports detected [ 0.475741] alloc irq_desc for 20 on node -1 [ 0.475744] alloc kstat_irqs on node -1 [ 0.475752] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.475778] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.475782] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.475825] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.475858] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.479752] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.479775] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.527287] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.527435] usb usb2: configuration #1 chosen from 1 choice [ 0.527473] hub 2-0:1.0: USB hub found [ 0.527486] hub 2-0:1.0: 6 ports detected [ 0.527571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.527594] uhci_hcd: USB Universal Host Controller Interface driver [ 0.527649] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.527660] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.527665] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.527711] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.527745] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 0.527850] usb usb3: configuration #1 chosen from 1 choice [ 0.527881] hub 3-0:1.0: USB hub found [ 0.527889] hub 3-0:1.0: 2 ports detected [ 0.527943] alloc irq_desc for 21 on node -1 [ 0.527945] alloc kstat_irqs on node -1 [ 0.527953] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.527961] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.527965] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.528022] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.528062] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 0.528180] usb usb4: configuration #1 chosen from 1 choice [ 0.528212] hub 4-0:1.0: USB hub found [ 0.528220] hub 4-0:1.0: 2 ports detected [ 0.528275] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.528283] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.528287] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.528323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.528354] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 0.528457] usb usb5: configuration #1 chosen from 1 choice [ 0.528485] hub 5-0:1.0: USB hub found [ 0.528492] hub 5-0:1.0: 2 ports detected [ 0.528544] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.528556] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.528560] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.528599] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.528632] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 0.528739] usb usb6: configuration #1 chosen from 1 choice [ 0.528768] hub 6-0:1.0: USB hub found [ 0.528777] hub 6-0:1.0: 2 ports detected [ 0.528836] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.528844] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.528848] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.528885] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.528918] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.529027] usb usb7: configuration #1 chosen from 1 choice [ 0.529057] hub 7-0:1.0: USB hub found [ 0.529065] hub 7-0:1.0: 2 ports detected [ 0.529191] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.542162] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.553757] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.553774] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.553828] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.553853] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.553877] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.554044] mice: PS/2 mouse device common for all mice [ 0.554636] rtc_cmos 00:04: RTC can wake from S4 [ 0.554692] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.554732] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.554862] device-mapper: uevent: version 1.0.3 [ 0.598713] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.600214] Freeing initrd memory: 13255k freed [ 0.609686] device-mapper: multipath: version 1.1.0 loaded [ 0.609692] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.609908] EISA: Probing bus 0 at eisa.0 [ 0.609918] Cannot allocate resource for EISA slot 1 [ 0.609921] Cannot allocate resource for EISA slot 2 [ 0.609952] EISA: Detected 0 cards. [ 0.610119] cpuidle: using governor ladder [ 0.610250] cpuidle: using governor menu [ 0.610771] TCP cubic registered [ 0.610942] NET: Registered protocol family 10 [ 0.611473] lo: Disabled Privacy Extensions [ 0.611856] NET: Registered protocol family 17 [ 0.612482] Using IPI No-Shortcut mode [ 0.612595] PM: Resume from disk failed. [ 0.612609] registered taskstats version 1 [ 0.613320] Magic number: 14:559:726 [ 0.613336] block loop6: hash matches [ 0.613428] rtc_cmos 00:04: setting system clock to 2010-06-27 08:44:35 UTC (1277628275) [ 0.613432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.613434] EDD information not available. [ 0.643370] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33 [ 0.654475] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.712336] ata1.00: configured for UDMA/33 [ 0.812036] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.819061] isapnp: No Plug & Play device found [ 0.822735] scsi 0:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5 [ 0.838745] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.838749] Uniform CD-ROM driver Revision: 3.20 [ 0.838862] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.838925] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.838990] Freeing unused kernel memory: 656k freed [ 0.839429] Write protecting the kernel text: 4676k [ 0.839488] Write protecting the kernel read-only data: 1840k [ 0.865756] ramzswap: disk size set to 1543640 kB [ 0.873749] udev: starting version 151 [ 0.913970] Adding 1543636k swap on /dev/ramzswap0. Priority:100 extents:1 across:1543636k SS [ 0.950344] usb 1-1: configuration #1 chosen from 1 choice [ 1.051302] Linux agpgart interface v0.103 [ 1.054055] sky2 driver version 1.25 [ 1.054119] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.054141] sky2 0000:09:00.0: setting latency timer to 64 [ 1.054183] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 1.054308] alloc irq_desc for 27 on node -1 [ 1.054311] alloc kstat_irqs on node -1 [ 1.054333] sky2 0000:09:00.0: irq 27 for MSI/MSI-X [ 1.055161] sky2 eth0: addr 00:21:9b:da:f1:e7 [ 1.058704] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.059145] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.065629] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.071054] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.071434] ahci 0000:00:1f.2: version 3.0 [ 1.071461] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.071522] alloc irq_desc for 28 on node -1 [ 1.071525] alloc kstat_irqs on node -1 [ 1.071541] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.071633] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.071638] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.071644] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.077145] scsi2 : ahci [ 1.077248] scsi3 : ahci [ 1.077322] scsi4 : ahci [ 1.077606] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 28 [ 1.077609] ata4: DUMMY [ 1.077612] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 28 [ 1.104637] [drm] Initialized drm 1.1.0 20060810 [ 1.199691] usb 2-1: configuration #1 chosen from 1 choice [ 1.400067] ata5: SATA link down (SStatus 0 SControl 300) [ 1.400100] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.441557] ata3.00: ATA-8: WDC WD3200BEVT-75ZCT0, 11.01A11, max UDMA/133 [ 1.441561] ata3.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 1.442598] ata3.00: configured for UDMA/133 [ 1.456221] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0 ANSI: 5 [ 1.456419] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.456459] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.456531] sd 2:0:0:0: [sda] Write Protect is off [ 1.456534] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.456563] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.456727] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 1.536470] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.544717] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.565763] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.565769] i915 0000:00:02.0: setting latency timer to 64 [ 1.570373] alloc irq_desc for 29 on node -1 [ 1.570377] alloc kstat_irqs on node -1 [ 1.570388] i915 0000:00:02.0: irq 29 for MSI/MSI-X [ 1.570396] [drm] set up 7M of stolen space [ 1.609740] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.638307] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 1.810517] usb 5-2: configuration #1 chosen from 1 choice [ 1.835733] usbcore: registered new interface driver hiddev [ 1.849732] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5 [ 1.849972] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 1.850002] usbcore: registered new interface driver usbhid [ 1.850121] usbhid: v2.6:USB HID core driver [ 2.052436] [drm] initialized overlay support [ 2.775426] fb0: inteldrmfb frame buffer device [ 2.775430] registered panic notifier [ 2.788646] acpi device:2f: registered as cooling_device2 [ 2.790337] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 2.790391] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.790452] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 2.790532] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input7 [ 2.790572] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 2.790601] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.792657] vga16fb: initializing [ 2.792661] vga16fb: mapped to 0xc00a0000 [ 2.792665] vga16fb: not registering due to another framebuffer present [ 2.884224] ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc00038ec55a1] [ 3.040400] Console: switching to colour frame buffer device 160x50 [ 3.957896] xor: automatically using best checksumming function: pIII_sse [ 3.976005] pIII_sse : 6837.000 MB/sec [ 3.976007] xor: using function: pIII_sse (6837.000 MB/sec) [ 3.979000] device-mapper: dm-raid45: initialized v0.2594b [ 4.166929] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 10.874626] udev: starting version 151 [ 10.962860] Adding 3427320k swap on /dev/sda8. Priority:-1 extents:1 across:3427320k [ 11.074552] lp: driver loaded but no devices found [ 11.139008] Linux video capture interface: v2.00 [ 11.217034] lib80211: common routines for IEEE802.11 drivers [ 11.217038] lib80211_crypt: registered algorithm 'NULL' [ 11.225907] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 11.228968] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 11.231769] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 11.231776] uvcvideo: Failed to initialize the device (-5). [ 11.231845] usbcore: registered new interface driver uvcvideo [ 11.231849] USB Video Class driver (v0.1.0) [ 11.259916] wl: module license 'MIXED/Proprietary' taints kernel. [ 11.259920] Disabling lock debugging due to kernel taint [ 11.295346] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 11.301573] sdhci: Secure Digital Host Controller Interface driver [ 11.301577] sdhci: Copyright(c) Pierre Ossman [ 11.303143] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 11.303172] alloc irq_desc for 18 on node -1 [ 11.303174] alloc kstat_irqs on node -1 [ 11.303184] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 11.315587] Registered led device: mmc0:: [ 11.316675] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 11.318660] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.318677] wl 0000:0b:00.0: setting latency timer to 64 [ 11.329949] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 11.350843] lib80211_crypt: registered algorithm 'TKIP' [ 11.351062] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 [ 11.398627] type=1505 audit(1277644486.282:2): operation="profile_load" pid=759 name="/sbin/dhclient3" [ 11.399373] type=1505 audit(1277644486.282:3): operation="profile_load" pid=759 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.399773] type=1505 audit(1277644486.282:4): operation="profile_load" pid=759 name="/usr/lib/connman/scripts/dhclient-script" [ 11.477418] IR NEC protocol handler initialized [ 11.538724] IR RC5(x) protocol handler initialized [ 11.549909] IR RC6 protocol handler initialized [ 11.604915] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9 [ 11.613525] IR JVC protocol handler initialized [ 11.615439] em28xx: New device USB 2861 Device @ 480 Mbps (eb1a:e305, interface 0, class 0) [ 11.615580] em28xx #0: chip ID is em2860 [ 11.630629] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10 [ 11.733456] IR Sony protocol handler initialized [ 11.882334] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 05 e3 d0 00 5c 00 6a 22 00 00 [ 11.882350] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00 [ 11.882362] em28xx #0: i2c eeprom 20: 06 00 01 00 f0 10 01 00 00 00 00 00 5b 00 00 00 [ 11.882375] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 11.882388] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882400] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882412] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 11.882425] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00 [ 11.882437] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 11.882450] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882462] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882475] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882487] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882499] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882512] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882524] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.882538] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x28a51142 [ 11.882540] em28xx #0: EEPROM info: [ 11.882542] em28xx #0: AC97 audio (5 sample rates) [ 11.882544] em28xx #0: 500mA max power [ 11.882547] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 11.883953] em28xx #0: Identified as KWorld DVB-T 305U (card=47) [ 11.883957] em28xx #0: [ 11.883958] [ 11.883961] em28xx #0: The support for this board weren't valid yet. [ 11.883964] em28xx #0: Please send a report of having this working [ 11.883966] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 11.883967] [ 11.907908] tvp5150 5-005c: chip found @ 0xb8 (em28xx #0) [ 11.952235] type=1505 audit(1277644486.838:5): operation="profile_load" pid=897 name="/usr/share/gdm/guest-session/Xsession" [ 11.954538] type=1505 audit(1277644486.838:6): operation="profile_replace" pid=898 name="/sbin/dhclient3" [ 11.955299] type=1505 audit(1277644486.838:7): operation="profile_replace" pid=898 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.955705] type=1505 audit(1277644486.838:8): operation="profile_replace" pid=898 name="/usr/lib/connman/scripts/dhclient-script" [ 11.960416] type=1505 audit(1277644486.846:9): operation="profile_load" pid=899 name="/usr/bin/evince" [ 11.970876] type=1505 audit(1277644486.854:10): operation="profile_load" pid=899 name="/usr/bin/evince-previewer" [ 11.977047] type=1505 audit(1277644486.862:11): operation="profile_load" pid=899 name="/usr/bin/evince-thumbnailer" [ 12.033146] tuner 5-0061: chip found @ 0xc2 (em28xx #0) [ 12.035862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 12.035944] alloc irq_desc for 30 on node -1 [ 12.035947] alloc kstat_irqs on node -1 [ 12.035964] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X [ 12.036008] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.038201] sky2 eth0: enabling interface [ 12.039203] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.210340] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 12.430946] xc2028 5-0061: creating new instance [ 12.430951] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [ 12.430962] usb 2-1: firmware: requesting xc3028-v27.fw [ 12.448196] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.448319] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.448400] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.596816] xc2028 5-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 12.675676] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 12.675681] vboxdrv: Successfully done. [ 12.675683] vboxdrv: Found 2 processor cores. [ 12.676199] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0xa02 [ 12.676808] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 12.676812] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001). [ 12.681047] xc2028 5-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 12.811663] ppdev: user-space parallel port driver [ 13.789564] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 13.792277] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.208032] eth0: no IPv6 routers present [ 25.348071] xc2028 5-0061: Loading firmware for type=(0), id 000000000000b700. [ 25.600066] SCODE (20000000), id 000000000000b700: [ 25.600071] xc2028 5-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 25.816229] em28xx #0: Config register raw data: 0xd0 [ 25.840229] em28xx #0: AC97 vendor ID = 0xffffffff [ 25.852231] em28xx #0: AC97 features = 0x6a90 [ 25.852233] em28xx #0: Empia 202 AC97 audio processor detected [ 26.376480] tvp5150 5-005c: tvp5150am1 detected. [ 28.592063] em28xx #0: v4l2 driver version 0.1.2 [ 29.584175] em28xx #0: V4L2 video device registered as video0 [ 29.584178] em28xx #0: V4L2 VBI device registered as vbi0 [ 29.596081] em28xx video device (eb1a:e305): interface 1, class 255 found. [ 29.596085] em28xx This is an anciliary interface not used by the driver [ 29.596123] usbcore: registered new interface driver em28xx [ 29.596126] em28xx driver loaded [ 29.613688] em28xx_alsa: disagrees about version of symbol snd_pcm_new [ 29.613694] em28xx_alsa: Unknown symbol snd_pcm_new [ 29.613797] em28xx_alsa: disagrees about version of symbol snd_card_register [ 29.613799] em28xx_alsa: Unknown symbol snd_card_register [ 29.613900] em28xx_alsa: disagrees about version of symbol snd_card_free [ 29.613902] em28xx_alsa: Unknown symbol snd_card_free [ 29.614094] em28xx_alsa: disagrees about version of symbol snd_pcm_lib_ioctl [ 29.614096] em28xx_alsa: Unknown symbol snd_pcm_lib_ioctl [ 29.614366] em28xx_alsa: disagrees about version of symbol snd_pcm_set_ops [ 29.614368] em28xx_alsa: Unknown symbol snd_pcm_set_ops [ 29.614562] em28xx_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer [ 29.614564] em28xx_alsa: Unknown symbol snd_pcm_hw_constraint_integer [ 29.614944] em28xx_alsa: disagrees about version of symbol snd_card_create [ 29.614946] em28xx_alsa: Unknown symbol snd_card_create [ 29.615041] em28xx_alsa: disagrees about version of symbol snd_pcm_period_elapsed [ 29.615043] em28xx_alsa: Unknown symbol snd_pcm_period_elapsed [ 29.941453] tvp5150 5-005c: tvp5150am1 detected. [ 237.610288] em28xx_audioep: disagrees about version of symbol snd_pcm_new [ 237.610295] em28xx_audioep: Unknown symbol snd_pcm_new [ 237.610439] em28xx_audioep: disagrees about version of symbol snd_card_register [ 237.610442] em28xx_audioep: Unknown symbol snd_card_register [ 237.610582] em28xx_audioep: disagrees about version of symbol snd_card_free [ 237.610586] em28xx_audioep: Unknown symbol snd_card_free [ 237.611103] em28xx_audioep: disagrees about version of symbol snd_pcm_lib_ioctl [ 237.611107] em28xx_audioep: Unknown symbol snd_pcm_lib_ioctl [ 237.611356] em28xx_audioep: disagrees about version of symbol snd_pcm_set_ops [ 237.611360] em28xx_audioep: Unknown symbol snd_pcm_set_ops [ 237.611610] em28xx_audioep: disagrees about version of symbol snd_pcm_hw_constraint_integer [ 237.611614] em28xx_audioep: Unknown symbol snd_pcm_hw_constraint_integer [ 237.611897] em28xx_audioep: disagrees about version of symbol snd_card_create [ 237.611900] em28xx_audioep: Unknown symbol snd_card_create [ 237.612047] em28xx_audioep: disagrees about version of symbol snd_pcm_period_elapsed [ 237.612050] em28xx_audioep: Unknown symbol snd_pcm_period_elapsed [ 249.146743] em28xx_audio: Unknown symbol em28xx_i2c_call_clients [ 249.147027] em28xx_audio: disagrees about version of symbol snd_pcm_new [ 249.147029] em28xx_audio: Unknown symbol snd_pcm_new [ 249.147130] em28xx_audio: disagrees about version of symbol snd_card_register [ 249.147133] em28xx_audio: Unknown symbol snd_card_register [ 249.147233] em28xx_audio: disagrees about version of symbol snd_card_free [ 249.147236] em28xx_audio: Unknown symbol snd_card_free [ 249.147388] em28xx_audio: disagrees about version of symbol snd_component_add [ 249.147390] em28xx_audio: Unknown symbol snd_component_add [ 249.147569] em28xx_audio: disagrees about version of symbol snd_pcm_lib_ioctl [ 249.147572] em28xx_audio: Unknown symbol snd_pcm_lib_ioctl [ 249.147667] em28xx_audio: disagrees about version of symbol em28xx_unregister_extension [ 249.147670] em28xx_audio: Unknown symbol em28xx_unregister_extension [ 249.147840] em28xx_audio: disagrees about version of symbol snd_pcm_set_ops [ 249.147842] em28xx_audio: Unknown symbol snd_pcm_set_ops [ 249.147948] em28xx_audio: disagrees about version of symbol snd_pcm_hw_constraint_integer [ 249.147950] em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer [ 249.148100] em28xx_audio: disagrees about version of symbol em28xx_register_extension [ 249.148103] em28xx_audio: Unknown symbol em28xx_register_extension [ 249.148322] em28xx_audio: disagrees about version of symbol snd_card_create [ 249.148324] em28xx_audio: Unknown symbol snd_card_create [ 249.148425] em28xx_audio: disagrees about version of symbol snd_pcm_period_elapsed [ 249.148427] em28xx_audio: Unknown symbol snd_pcm_period_elapsed [ 335.597655] usbcore: registered new interface driver snd-usb-audio [ 546.460565] tvp5150 5-005c: tvp5150am1 detected. [ 549.536076] xc2028 5-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 562.032101] xc2028 5-0061: Loading firmware for type=(0), id 000000000000b700. [ 562.284101] SCODE (20000000), id 000000000000b700: [ 562.284117] xc2028 5-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
-- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
[Linux Media] [Older V4L] [Linux DVB] [Video Disk Recorder] [Linux Kernel] [Asterisk] [Photo] [DCCP] [Netdev] [Xorg] [Util Linux NG] [Xfree86] [Free Photo Albums] [Fedora Users] [Fedora Women] [ALSA Users] [ALSA Devel] [SSH] [DVB Maintainers] [Linux USB] [Yosemite Information]
|
|