Re: Gspca problem with kernel 2.6.27

[Cristhian Daniel Parra Trepowski <cdparra@xxxxxxxxx>]

This are the error message that I get when I try to load de module:

Jan 23 12:57:48 cparranb kernel: usb 1-4: new high speed USB device using
ehci_hcd and address 50
Jan 23 12:57:49 cparranb kernel: usb 1-4: configuration #1 chosen from 1
choice
Jan 23 12:57:49 cparranb kernel: usb 1-4: New USB device found,
idVendor=046d, idProduct=0896
Jan 23 12:57:49 cparranb kernel: usb 1-4: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
Jan 23 12:57:49 cparranb kernel: usb 1-4: Product: Camera
Jan 23 12:57:49 cparranb kernel: usb 1-4: Manufacturer: OEM
Jan 23 12:57:49 cparranb kernel: gspca: probing 046d:0896
Jan 23 12:57:49 cparranb kernel: vc032x: check sensor header 2c
Jan 23 12:57:49 cparranb kernel: usb 1-4: USB disconnect, address 50
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: I2c Bus Busy Wait 0
Jan 23 12:57:49 cparranb kernel: vc032x: Unknown sensor...
Jan 23 12:57:49 cparranb kernel: vc032x: probe of 1-4:1.0 failed with error
-22

Best regards,

On Fri, Jan 23, 2009 at 12:24 PM, Cristhian Daniel Parra Trepowski <
cdparra@xxxxxxxxx> wrote:

> Hello Everyone,
>
> I've been looking a lot for a fix to the problem of gspca_vc032x module
> with kernels 2.6.27.xx without any luck. A description of the problem can be
> found here <https://bugs.launchpad.net/ubuntu/+source/linux/+bug/271258>.
>
> I installed the jfrancois<http://linuxtv.org/hg/%7Ejfrancois/gspca/summary>version of the driver from mercurial, and still have the same problem.
>
> Basically, the module can't be loaded and when you try to do it, it hangs
> up.
>
> modprobe -s -v gspca_vc032x
> insmod
> /lib/modules/2.6.27.9-159.fc10.i686/kernel/drivers/media/video/v4l1-compat.ko
>
> insmod
> /lib/modules/2.6.27.9-159.fc10.i686/kernel/drivers/media/video/videodev.ko
> insmod
> /lib/modules/2.6.27.9-159.fc10.i686/kernel/drivers/media/video/gspca/gspca_main.ko
>
> insmod
> /lib/modules/2.6.27.9-159.fc10.i686/kernel/drivers/media/video/gspca/gspca_vc032x.ko
>
> ...
> It hangs here.
>
>   My hardware is:
>   Bus 001 Device 002: ID 046d:0896 Logitech, Inc. OrbiCam
>
>   My Kernel:
>   2.6.27.9-159.fc10.i686
>
>   ¿Does someone know about a workaround on this?.
>
> Thanks,
> --
> Cristhian Daniel Parra Trepowski....
>



-- 
Cristhian Daniel Parra Trepowski....
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subjecthttps://www.redhat.com/mailman/listinfo/video4linux-list