Hi all,
I still stuck in the problem that I can't tune to the
AGILA2 KU-Band sat using the HVR4000
- cx24116_load_firmware: FW version 1.22.82.0 .
I sure the Dish is working properly (have my Dreambox running on it and
use the
Frequencies where I got a good signal)
Someone any successions?
Thanx
Chris
my scan file:
#AGILA2
S 12501000 H 30002000 3/4
cx24116 log:
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend: DVB-S
delivery system selected
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_inversion(0)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_fec(0x00,0x03)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_lookup_fecmod(0x00,0x03)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_fec() mask/val = 0x08/0x30
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_symbolrate(30002000)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_symbolrate()
symbol_rate = 30002000
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
modulation = 0
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
frequency = 1900000
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
pilot = 0 (val = 0x00)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
retune = 1
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
rolloff = 0 (val = 0x02)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
symbol_rate = 30002000
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
FEC = 3 (mask/val = 0x08/0x30)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_set_frontend:
Inversion = 0 (val = 0x00)
Dec 8 17:34:26 vbox kernel: cx24116: cx24116_cmd_execute()
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list