Re: Hauppauge WinTV USB2-Stick with Hardy

["Yair Weinberger" <yairwein@xxxxxxxxx>]

Hi,
Thanks for your help.
My hardware's ID doesn't appear also on the tm6010 tree. (grep -r
"0x2040, 0x6610" * returns nothing).
It appears that it is actually HVR 900H.

Anything else I should try?

  Wein

On Thu, Sep 4, 2008 at 5:04 PM, Steven Toth <stoth@xxxxxxxxxxx> wrote:
> Yair Weinberger wrote:
>>
>> Hi,
>> I bought a new Hauppauge WinTV USB2-Stick (At least that's the writing
>> on the card).  According to the v4l documentation, this card should be
>> supported in the em28xx drivers (card #4).  However, in the
>> documentation the vendor & device ID should be 2040:4200 or 2040:4201,
>> and my output of lsusb is 2040:6610.
>> I checked the em28xx-cards.c file, and my ID doesn't seem to appear
>> there (nor in any other file as far as I know).
>> The device is of course not automatically recognized, Output of dmesg
>> | grep em28xx:
>> [  198.082257] em28xx v4l2 driver version 0.1.0 loaded
>> [  198.082294] usbcore: registered new interface driver em28xx
>>
>> Trying to load it with card=4 produced the following error in the dmesg
>> output:
>> em28xx probing error: endpoint is non-ISO endpoint.
>>
>> I attached what I think is the appropriate inf file from the Windows
>> drivers disk (renamed as text).  I will happily provide more data if
>> required.
>>
>> Any advice will be appreciated,
>>  Wein
>
> The 66xx model is not supported my the em28xx driver.
>
> For this you need Mauro's tm6010 development trees at
> linuxtv.org/hg/~mchehab/... although I'm not sure what level of support he
> has for that unit.
>
> - Steve
>

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list