Re: Hauppauge WinTV USB2-Stick with Hardy

[Steven Toth <stoth@xxxxxxxxxxx>]

Yair Weinberger wrote:
> Hi,
> I bought a new Hauppauge WinTV USB2-Stick (At least that's the writing
> on the card).  According to the v4l documentation, this card should be
> supported in the em28xx drivers (card #4).  However, in the
> documentation the vendor & device ID should be 2040:4200 or 2040:4201,
> and my output of lsusb is 2040:6610.
> I checked the em28xx-cards.c file, and my ID doesn't seem to appear
> there (nor in any other file as far as I know).
> The device is of course not automatically recognized, Output of dmesg
> | grep em28xx:
> [  198.082257] em28xx v4l2 driver version 0.1.0 loaded
> [  198.082294] usbcore: registered new interface driver em28xx
>
> Trying to load it with card=4 produced the following error in the dmesg output:
> em28xx probing error: endpoint is non-ISO endpoint.
>
> I attached what I think is the appropriate inf file from the Windows
> drivers disk (renamed as text).  I will happily provide more data if required.
>
> Any advice will be appreciated,
>  Wein

The 66xx model is not supported my the em28xx driver.

For this you need Mauro's tm6010 development trees at 
linuxtv.org/hg/~mchehab/... although I'm not sure what level of support 
he has for that unit.

- Steve

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list