Re: Setting the tuner type of cx88xx Module in Kernel 2.6.26.2 does not work anymore

[Marcel Tiede <badcel@xxxxxx>]

Hi again,

I switched the pci - slot of the tv - card just to check if there is any
other behaviour (regarding eeprom detection). It just did not help :-(

>From the archlinux forum someone asked me wether my card is listed in
the pci-id repository. I don't know if this is relevant to the modul...

lspci -nn reports:

01:09.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI
Video and Audio Decoder [14f1:8800] (rev 05)
01:09.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder [Audio Port] [14f1:8811] (rev 05)

If I take a look into http://pci-ids.ucw.cz/iii/?i=0070 I can not find
my id 8811 / 8800. (If I get s.th. wrong here, I'm sorry and an absolute
beginner in this topic ;-))

My card is a Hauppauge PCI-FM it is model nr. 34519 revision J160.

Anyway, from my point of view, the modul should (again) provide a way to
set the tuner manually.

Greetings

Marcel

Am Montag, den 25.08.2008, 17:44 +0200 schrieb Marcel Tiede:
> Hello,
> 
> till the last Kernel Upgrade of my distribution (Archlinux) I'm not able
> to set the tuner type of my conexant card in order to view tv. The
> setting is recognized by cx88xx module, but the tuner-simple seems to
> overwrite this setting again.
> 
> Extract:
> 
> Because my card is not recognized correctly, I use the following script
> to load
> my modules correctly:
> 
> modprobe -r cx88-dvb cx88-blackbird cx8802 cx88-alsa cx8800 cx88xx tuner
> tuner-simple
> modprobe tuner-simple debug=1
> modprobe cx88xx tuner=38
> modprobe cx8800
> 
> After running this script dmesg states:
> 
> tda9887 2-0043: destroying instance
> tuner-simple 2-0061: destroying instance
> Linux video capture interface: v2.00
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) ->
> IRQ 16
> cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models
> [card=1,autodetected]
> cx88[0]: TV tuner type 38, Radio tuner type -1
> tuner' 2-0043: chip found @ 0x86 (cx88[0])
> tda9887 2-0043: creating new instance
> tda9887 2-0043: tda988[5/6/7] found
> tuner' 2-0061: chip found @ 0xc2 (cx88[0])
> tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge
> eeprom.
> cx88[0]: warning: unknown hauppauge model #0
> cx88[0]: hauppauge eeprom: model=0
> tuner-simple 2-0061: creating new instance
> tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
> tuner-simple 2-0061: tuner 0 atv rf input will be autoselected
> tuner-simple 2-0061: tuner 0 dtv rf input will be autoselected
> tuner-simple 2-0061: using tuner params #0 (pal)
> tuner-simple 2-0061: freq = 400.00 (6400), range = 1, config = 0x8e, cb = 0x04
> tuner-simple 2-0061: Freq= 400.00 MHz, V_IF=38.93 MHz, Offset=0.00 MHz,
> div=7023
> tuner-simple 2-0061: tv 0x1b 0x6f 0x8e 0x04
> input: cx88 IR (Hauppauge WinTV 34xxx  as /class/input/input9
> cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio:
> 0xe6000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> tuner-simple 2-0061: desired params (ntsc) undefined for tuner 0
> tuner-simple 2-0061: using tuner params #0 (pal)
> tuner-simple 2-0061: freq = 400.00 (6400), range = 1, config = 0x8e, cb = 0x04
> tuner-simple 2-0061: Freq= 400.00 MHz, V_IF=45.75 MHz, Offset=0.00 MHz,
> div=7132
> tuner-simple 2-0061: tv 0x1b 0xdc 0x8e 0x04
> 
> >>From my point of view this line is critical:
> 
> tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
> 
> This should type 38 instead, like in:
> 
> cx88[0]: TV tuner type 38, Radio tuner type -1
> 
> I already opened a bugreport in the Kernels bugzilla, but noone is
> responding: http://bugzilla.kernel.org/show_bug.cgi?id=11367 So I
> thought this would be the correct place to get things rolling.
> 
> Thanks for your help.
> 
> Marcel
> 
> --
> video4linux-list mailing list
> Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list