support for Hauppauge WinTV PCI-FM model 747?

[Veiko Kukk <veiko@xxxxxxxx>]

Hi!

I recently bought this TV card and need to get it working under linux.
Pictures of the card are at the address: http://www.linux.ee/~veiko/hauppauge

Currently using Gentoo with the latest 2.6.13-rc4 kernel and todays cvs version
of video4linux.
As can be seen on pictures, this card has Conexant cx23881-19 chip and LG
TAPE-S001D tuner.

I chose card=1 (Hauppauge WinTV 34xxx models) from CARDLIST.cx88 and tuner=55
(LG PAL (TAPE series)) from CARDLIST.tuner.

'modprobe cx88xx card=1 tuner=55'
'modprobe cx8800'

dmesg output:

Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) ->
IRQ 21
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models
[card=1,insmod option]
TV tuner 55 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom: Hauppauge: model = 34519, rev = J160, serial# = 2960922
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 4)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3425 (type = 15)
cx88[0]: registered IR remote control
cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 21, latency: 32, mmio: 0xe7000000
tda9885/6/7: chip found @ 0x86
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0

Tried with kdetv, tvtime and xawtv with no luck at all. Only colorful video
noise from tuner. Havent even think about radio yet.

Is it possible that support for that card is implemented soon in video4linux or
should i give up?

--
Veiko

--

Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list