Re: Problem with "Much TV Cardbus" (Philips SAA7134 chipset) | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Am Freitag, 3. Juni 2005 01:16 schrieb Alexander R. Gruber: > Jun 2 23:46:53 linux kernel: saa7134[0]: subsystem: 1131:0000, board: > UNKNOWN/GENERIC [card=0,autodetected] > Jun 2 23:46:53 linux kernel: saa7134[0]: board init: gpio is e240c0 > Jun 2 23:46:53 linux kernel: tda9885/6/7: chip found @ 0x96 > Jun 2 23:46:53 linux kernel: saa7134[0]: Huh, no eeprom present (err=-5)? > Jun 2 23:46:54 linux kernel: saa7134[0]: registered device video0 [v4l2] > Jun 2 23:46:54 linux kernel: saa7134[0]: registered device vbi0 Doesn't look too good... saa7134 can't detect the card because it doesn't have an EEPROM with an ID. Therefore it doesn't load a tuner, and you cannot watch TV. If you've also got a video input, that could work. >From the GPIO value (7 bits set...) I would guess that it's quite a strange hardware. It's probably no use to blindly try card/tuner combinations. You need to get more information about the tuner. Maybe you could open the card and look it up. If you do so, please post ALL information about the tuner and the chips on the card. Unless you get information about the tuner somehow, it will probably be difficult. And afterwards you still need to get the GPIOs right... Maybe somebody else knows more about this card ? Hans -- Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
|
